With the rapid development and prevailing of online shopping, it is fairly easy to get an advanced car stereo with intelligent features. If you are being tired of your single-functional factory radio, it is wise of you to buy a brand new online and install it on your own which will save you a lot. This passage is about a step-by-step 2005-2012 Mercedes Benz GL Class X164 gps car stereo installation instruction from Seicane. If you own a 2005-2012 Mercedes Benz GL Class X164 gps car stereo, it suggests you to read it carefully.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2005-2012 Mercedes Benz GL Class X164 gps car stereo installation instruction
1. The original car stereo.
2.Pry the bottoming panel out of the dash with a plastic knife.
3.Pry the air conditioner panel out and remove it.
4.Remove two screws that fixed the radio on the dashboard with a screwdriver.
5. Use your finger to pull the buckles down.
6.Gently pull the factory radio out of the dash.
7. Then unplug the connectors at the back of the factory radio.
8. Check all the accessories for the new Seicane car stereo.
9. Connect the harnesses to the back of the new Seicane car stereo.
10. Connect the Seicane car stereo to your original stereo’s plugs.
11. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
12. Put the new Seicane car stereo into the dash.
13. Put everything into their original place. All the installation is done.
To have a successful installation, please make sure you are clear about every step before your installation. If you have any question, you can consult your dealer for suggestions. But if you don’t have some experience before and you think it too hard for you to achieve the whole installation, you’d better go to a car stereo upgrade centre and ask a technician to help you install it directly. If you are searching for a suitable car stereo online, you may check the link below which is about a remarkable 2005-2012 Mercedes Benz GL Class X164 gps car stereo from Seicane.
This car stereo with the latest Android 5.1.1 operating system and a RK3188 1.6 GHz Cortex A9 Quad-core processor will be your best choice to upgrade your in-car environment. The accurate text-to-speech guidance of the GPS system makes it possible for you to find the best route to your ideal destination. With the aid of Bluetooth technology, you can have hands-free calls to keep safer and stream music to have fun. To please both you and your passenger, this unit allow you to play region-free DVDs, TV programs, FM/AM radio, etc, all the way. Just install this marvelous 2005-2012 Mercedes Benz GL Class X164 gps car stereo in your beloved car and enjoy your long journey from now on!