Home › 2019 › June › 20

Daily Archives: June 20, 2019

How to Quickly Install and Upgrade a 2011 2012 BMW 6 Series F06/F12 CIC GPS Navigation Radio

Posted on by — No Comments ↓ 2,503 views

The Global Positioning System (GPS) Navigation Kit guides you through alternative routes in an unfamiliar area and maps and times your journey to a specific destination. GPS navigators can access a network of approximately 30 Earth orbit satellites to pinpoint your latitude and longitude. Then The GPS receiver overwrites the information onto a series of preloaded maps to correctly calculate route information, speed and direction.But now, your factory radio navigator can not satisfy you anymore. More and more people are looking for a new unit and replace it by themselves. But how to replace it by yourself, the following is an instruction on 2011 2012 BMW 6 Series F06/F12 CIC GPS Navigation Radio from Seicane, you can take it as a reference if you have a car which is similar to 2011 2012 BMW 6 Series F06/F12 CIC.

2011 2012 BMW 6 Series F06/F12 CIC GPS Navigation Radio after installation

Something you should know:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2011 2012 BMW 6 Series F06/F12 CIC GPS navigation radio installation guidance

1. Original dashboard.

2. Pry loose the right side air outlet.

3. Pry loose the left side air outlet.

4. Take out the air-conditioning decorated plate.

5. Take out the decorated strip.

6. Remove four fixed screws.

7. Pry loose and take out the panel.

8. Remove four screws of original host.

9. Remove two screws of the monitor.

10. Take out the original monitor.

11. Remove the protection panel in the right side of armrest box.

12. Remove two screws.

13. Remove the cover of the gear knob.

14. Remove original IDRIVE screws and take out the panel.

15. Remove IDRIVE cable, and connect it to Android power harness.

16. Connect the original power harness with Android cable.

17. Fixed the plastic cover of Android unit to original dashboard.

18. Full test.

By now, do you understand each of the detailed steps in the above installation tips? If you are still not clear, please ask your dealer, skilled friend or professional for help. If you are afraid of any damage to your car or car radio, you can go to the car radio center and get your new car radio installed by a professional technician from your dealer. You must know car radios play an essential role in installation, it is wise to choose the ideal car radio. If you have no idea, i would like to share a remarkable 2011-2012 BMW 6 Series F06/F12 CIC GPS Navigation Radio from Seicane with you, see more details by click the following link:

https://www.seicane.com/polegadas-touchscreen-androide-2011-2012-bmw-6-series-f06-f12-cic-gps-radio-navegac-o-com-usb-wifi-suporte-bluetooth-tpms-dvr-televis-o-digital-s028236k

This powerful car radio has a large 10.25 inch digital multi-touch screen with a resolution of 1280 x 480, allowing you to enjoy the smooth display of movies, video, TV shows, and also a clear view on road.
Also, with wireless Bluetooth function, you have free access to Bluetooth hands-free calling and Bluetooth streaming music while keeping you safe and fun.

The advanced GPS module is specially designed for this device, it allows you to quickly find your location and navigate to any destination you want. What’s more, because of the strong dual zone function of this car radio, you can enjoy live music while navigating.

Why not add this unit into you shopping cart?

How to Easily Install and Upgrade a 2004 2005 2006 2007 2008 AUDI A4 Aftermarket Radio GPS Entertainment System

Posted on by — 2 Comments ↓ 7,288 views

With the rapid development of technology, people are becoming more and more productive, which means that the demand and popularity of portable and mobile solutions continue to increase. People like the ability to do what they want when they leave home. For example, when you are driving back home, you might want to install a GPS entertainment system in your car to end you dull trips. And how to install and upgrade it in a right way, the following is an installation instruction from Seicane for 2004 2005 2006 2007 2008 AUDI A4 Aftermarket Radio GPS Entertainment System. You can refer to it if you have a similar vehicle and you decide to replace it by yourself.

2004 2005 2006 2007 2008 AUDI A4 aftermarket radio GPS entertainment system after installation

Precaution for Installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. Please prepare professional car radio dismantling tools, screwdriver, 3M electronic tape, 3M double side tape, sleeve, cotton cloth.

5. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

Quick Upgrade Instruction for a 2004 2005 2006 2007 2008 AUDI A4 Aftermarket Radio GPS Entertainment System

1. Original car radio dash.

2. Insert in 4PCS dismantled keys.

3. Take the original host.

4. Remove the wire from original power harness.

5. Take out the air outlet.

6. Put the paper well in position.

7. Cut along red line.

8. Effect picture after cutting.

9. Take out control panel.

10. Take out gear decorated cover.

11. Take out cigar lighter.

12. Dismantle the cigar light (metal and plastic).

13. Install well the cigar lighter into Android IDRIVE.

14. Let IDRIVE cable go through original lighter hole.

15. Plug on lighter cable and put the IDRIVE cable into IDRIVE cable.

16. Remove gasket. locked the IDRIVE button well with PW3.5X8 screw.


17. Put well IDRIVE button.

18. Pry loose, take out the decoration strop and screws.

19. Plug well all Android cables and original power harness plug into Android adaptor.

20. Locked back original screws, then the holder can be fixed well.

21. Check all the wiring and power on to test.

22. Press button “CD” twice, switching to “TRACK02”, then Android will have sound.

23. Full test the fucntions and IDRIVE button.

24. Installation is done.

Above are tips on how to install and upgrade a car radio GPS system, i really hope that is helpful. But there are many different cars with very different structures and different functions. For safety consideration, if you have any problems during installation, you can call your dealer for a professional technician to install it, so that you can avoid damage to your car and car radio GPS system. If you want to buy a new unit, here i would like to commend a great 2004 2005 2006 2007 2008 AUDI A4 Aftermarket Radio GPS Entertainment System from Seicane to you, more details, please click:

https://www.seicane.com/android-2004-2008-audi-a4-car-radio-stereo-head-unit-gps-navigation-system-bluetooth-support-usb-wifi-rearview-camera-steering-wheel-control-s028102

This excellent 2004 2005 2006 2007 2008 AUDI A4 Aftermarket Radio GPS Entertainment System comes with a large 10.25 inch 5 point touch screen, which is ideal for you to enjoy the smooth operation and visual feast in your beloved car. Besides, rear seat passengers can watch DVD disc video from the Headrest Monitor while the driver using navigation on the front main unit. Go with this excellent car radio and enjoy your driving.

Good luck to you!