In this guide, I will walk you through the process of disassembling and installing an Android radio in your vehicle.
Begin by removing the entire button panel.
Next, unscrew the four screws to detach the original C screen, followed by removing the parking grip.
Lower the panel to access another four screws, allowing you to remove the clatter box. After disassembly, the interior should appear as shown.
Proceed by removing the two air vents and the air conditioning button panel. Install the previously removed buttons onto the new panel and then attach the air outlet to the Android radio.
Begin connecting the wires, including the fourth generation antenna, GPS antenna, video input cable, USB transmission cable, RCA audio cable, and the radio antenna.
Connect the canvas box and the protocol serial port, then reconnect the screen power plug and the reverse plug. Next, install the new button panel and connect the wires from the Android device to the original car plug.
After ensuring all connections are secure, install the Android car system and restore the panel, including the silver decorative strip. Complete the installation by attaching the parking handle.
Once installed, the car’s canvas box requires initial setup.
This setup supports various functions, including regional car air conditioning control, reversing camera support, volume and switch adjustments, switch reminders, local online video playback, offline or online maps, automatic radio station search, DSP audio adjustment, and steering wheel button control.
Finally, enjoy the wireless CarPlay or Android Auto features directly from your phone in your vehicle.
Thank you for following along with this installation guide!
Hi everyone! In this blog post, we’ll teach you how to upgrade 2016-2019 LEXUS RX car system. This upgrade includes AOS Wireless CarPlay and Android Auto. Once connected, you can make calls, listen to music, use online map navigation, and access many other mobile phone applications.
Firstly, we will remove the brown decorative panels on both sides.
Again, there are two screws on each side that fix the host. We will unscrew them.
Then we will dismantle the entire original car engine and unplug all the plugs on its back.
This is what it looks like when taken apart.
Now start connecting the cables.
Now connect the power harness to the two plugs on the back of the original screen. Reconnect the communication serial port.
Connect the audio plug to the RCA cable. Finally, connect the power plug to the Android screen. Install and fix it again.
Now start connecting to the host section. Restore the corresponding plug on it.
Restore the silver decorative strip as well. Finally, install these two brown panels back in place. The installation is now complete.
As this car comes with Canbus, it needs to be set up for the first use. Now, our Android system has no sound when we first use it.
We need to switch to audio mode, and we can observe the switching status through the dashboard. Of course, this car supports the original car system.
We can click on Aux to enter the original car system and then control audio output through the original Canbus. After the setup is complete, we can start experiencing the Android car radio.
This supports synchronizing the original car air conditioning information, supports the regional car reversing camera, and supports switch reminders.
It also has many other rich features for watching online movies. You can use offline or online maps, support Bluetooth phone, and Bluetooth music.
Enjoy wireless CarPlay or Android Auto function from your phone in your car. Okay, that’s all for the video. Thank you for watching.
Hi everyone! In this blog post, we’ll teach you how to upgrade 2018-2022 Chevrolet Volrando car system. This upgrade includes AOS Wireless CarPlay and Android Auto. Once connected, you can make calls, listen to music, use online map navigation, and access many other mobile phone applications.
Want to know how to upgrade? Follow these steps:
The first step is to remove the protective cover on the back of the original car screen.
Secondly, unscrew the two screws that secure the screen.
Thirdly, remove your original car screen, then unplug all the plugs on the back.
Now let’s start wiring.
This is the network antenna
This is a GPS antenna
This is a video input cable
This is a USB transmission cable
And this is the original car USB adapter cable.
Now connect to the Canbus box
Reconnect the speaker
Reconnect the RC audio cable
Then connect the protocol serial port.
Now connect the screen power plug
Then connect the reverse rearview plug.
Now we connect the original car plug with the corresponding wire.
Finally, we will install the new screen and tighten its two screws.
The installation is now complete. As it is the first time installing, we need to set up Canvas.
After setting it, it can support reversing, the original car support during wheel button control.
In addition, it also supports wireless CarPlay, Android Auto, watching online movies, using the radio to automatically search for channels, online map navigation, Bluetooth phone, and Bluetooth music.
Thank you for reading this blog post. We hope this guide helps you successfully upgrade your Chevrolet Volrando car system.
Self-driving adventures offer unparalleled freedom to explore remote landscapes and immerse oneself in nature’s beauty. However, embarking on such journeys requires meticulous planning, proper equipment, and a keen awareness of safety precautions. Here’s your comprehensive guide to preparing for and staying safe during outdoor self-driving expeditions.
Preparation: What to Pack
Vehicle Essentials
Maintenance: Ensure your vehicle undergoes thorough maintenance before the trip. Check oil levels, tire pressure, brakes, and ensure all lights are functiona
Emergency Kit: Pack a comprehensive emergency kit including a spare tire, tire-changing tools, jumper cables, tow ropes, and basic repair tools.
Navigation Tools: Carry updated maps, GPS devices, and consider offline navigation apps like the SeicaneCarPlay system. Familiarize yourself with the route and potential detours.
Communication: Bring a fully charged mobile phone with emergency contacts saved. In remote areas, consider a satellite phone or two-way radio.
Camping and Survival Gear
Shelter: Pack a tent suitable for the terrain and weather conditions, along with sleeping bags and sleeping pads for comfort.
Cooking Equipment: Portable stove, fuel, cooking utensils, and sufficient fuel for meals. Bring non-perishable food items and a water filtration system.
Clothing: Pack layered clothing suitable for various weather conditions, including rain gear, insulated jackets, and sturdy footwear.
Personal and Safety Items
First Aid Kit: Include bandages, antiseptics, pain relievers, and any necessary medications.
Personal Hygiene: Biodegradable soap, hand sanitizer, and toiletries. Pack a small towel and consider wet wipes for quick clean-ups.
Safety Gear: Headlamps, flashlights, and extra batteries. Reflective vests and roadside warning triangles are essential for roadside emergencies.
Safety Tips: What You Need to Know
Before You Go
Route Planning: Research the route thoroughly, noting road conditions, fuel stops, and potential hazards. Share your itinerary with a trusted contact.
Vehicle Readiness: Conduct a pre-trip vehicle inspection, checking fluids, tires, brakes, and lights. Ensure your spare tire is in good condition.
Weather Awareness: Check weather forecasts and prepare for changing conditions. Adjust your itinerary if severe weather is predicted.
On the Road
Driving Responsibly: Observe speed limits and road signs. Stay alert for wildlife and slow-moving vehicles, especially on narrow roads.
Emergency Preparedness: Know how to change a tire and handle basic roadside repairs. Keep emergency contacts handy and know local emergency numbers.
Campsite Safety: Choose safe and designated campsites. Follow Leave No Trace principles, respecting wildlife and preserving natural surroundings.
Emergency Situations
Communication: Maintain communication with friends or family, updating them on your progress. In remote areas, check in regularly via satellite phone.
Medical Emergencies: Be prepared to administer first aid and seek medical assistance promptly if needed. Know basic first aid techniques.
Vehicle Breakdowns: If your vehicle breaks down, stay with it and use emergency signals. Signal for help using reflective triangles or flares.
Conclusion
Embarking on an outdoor self-driving adventure is an exhilarating experience that requires thorough preparation and safety precautions. By packing essential gear, planning your route meticulously, and staying vigilant on the road, you can ensure a safe and memorable journey into the wilderness.
Remember, the key to a successful adventure lies in preparation and respect for nature. Happy trails and safe travels!
In this blog post, we’ll teach you how to upgrade the Lexus IS car system. This upgrade includes AOS Wireless CarPlay and Android Auto. Once connected, you can make calls, listen to music, use online map navigation, and access many other mobile phone applications.
Want to know how to upgrade? Follow these steps:
Rotate the Gear Grip: First, rotate the gear grip to the left and then remove the black decorative strips on both sides.
Open the Gear Panel: Open the gear panel. The back of the plug does not need to be removed; just set the panel aside.
Remove the Cigarette Lighter Panel: Unscrew the two screws that fix the cigarette lighter panel and remove the panel.
Unscrew the Bottom Screws: Unscrew the two screws at the bottom of the original car screen panel. Then remove the air outlet.
Unscrew the Top Screws: Remove the two screws above the original car screen panel.
Remove the Original Car Screen Panel: Remove the original car screen panel and unplug it from the back.
After removal, here’s how to install the new system:
Install Metal Accessories: Attach the two metal accessories to the back of the new car radio.
Remove the Original Screen’s Metal Part: Separate the original screen host from the CD host. Reinstall the two metal supports on the CD host.
Connect Wires: Insert the two adapters of the new wire into the CD host. Insert the k-pad plug into the new screen. Connect the screen power supply, the communication serial port line, the canvas box, and the OBD interface cable. Insert the other end into the original car OBD interface.
Connect Additional Wires: Connect the GPS antenna, video input line, USB transmission line, and the RC line. The red and white plugs on the power wire are connected to the EU plug of RC CA.
Reinsert Plugs: Connect the new wire to the original car plug according to size. Reinsert some plugs of the original CD host back. Connect the two plugs of the new wire to the plug of the original car.
Reconnect the Radio Antenna: Reconnect the original car radio antenna. After all connections are made, install the new screen and secure it. Reinstall the air outlet, cigarette lighter panel, gear panel, and the two decorative strips. Finally, reinstall the gear grip.
Before use, you need to configure the CAN bus settings:
Enter the settings menu.
Select factory settings and input the password.
Enter CAN bus settings, select protocol options, and choose the vehicle model.
Click to confirm. Note that the first setting needs to be connected to the network.
After completing the settings, you can use the new screen button to control the original car’s air conditioning. Additionally, the system has many other features, including the use of local or online maps, listening to your favorite radio station, preserving the original car CD function, adjusting the sound tone, and setting the sound size in the car.
Thank you for reading this blog post. We hope this guide helps you successfully upgrade your Lexus IS car system.
Hello everyone, today I will teach you how to upgrade the old Lexus RX, specifically focusing on its central console.
Firstly, we will begin by removing the decorative panel of the gear shift.
Then, we’ll take out the cigarette lighter panel, setting it aside as it doesn’t need to be removed completely.
Next, we’ll unscrew the four screws that secure the original car CD host, allowing us to remove the regional CD host and unplug all the necessary plugs from the back.
Similarly, we’ll unscrew the two screws securing the original car screen and remove the regional car screen, unplugging all the plugs from the back as well.
Moving on, we’ll remove the air outlet from the original car and install it onto the new car radio.
We’ll also install the matching metal frame onto the new car radio. Then, we’ll start connecting the wires, including the GPS antenna, fourth-generation antenna, video input cable, USB transmission cable, RC audio cable, and the original car plug. We’ll find a suitable one based on the size of the plug on the new power C, and if there isn’t one available, there’s no need to connect it.
Next, we’ll connect the Canbus box, ensuring all connections are secure.
Then, we’ll connect the Wi-communication plug to the car radio and its button panel plug.
We’ll connect the reverse plug to the video input cable and insert the original car radio and CH into the car radio.
Finally, we’ll connect the OBD socket and the screen power plug.
Once all connections are completed, we’ll install the car radio, fixing the two screws at the bottom, and reinstall the cigarette lighter panel.
Finally, we’ll install the gear decorative panel. Before use, we’ll need to set up the Canbus so that we can use the air conditioning and steering wheel buttons.
Additionally, the upgraded system offers many functions, including supporting local music and other software, online music with adjustable sound tone preferences, local and online videos, automatic search for local radio stations, local and online maps, Bluetooth phone and music support, and compatibility with Carplay and Android Auto for making phone calls, listening to songs, and using mobile application functions such as online maps.
Your ride just got an assistant! Imagine having your favorite apps from your iPhone accessible right on your car’s dashboard. Maps, music, messages, and more – all at a touch or voice command. Carplay is like having your best friend as your co-pilot, making every journey more enjoyable and safer.
You can view detailed installation videos via this link or purchase the product by clicking here.Don’t miss out on this incredible opportunity to upgrade your experience!
Rev up your engines, because Seicane is about to take your car ride to a whole new level of awesome!
Picture this: you’re cruising down the highway, wind in your hair, and the perfect soundtrack blasting from your car stereo. But wait, there’s more! With Seicane’s cutting-edge automotive audiovisual systems, your ride transforms into a full-blown concert experience on wheels!
Let’s break it down, shall we? Seicane is all about pushing the boundaries of in-car entertainment. We’re talking about next-level stuff here, folks! From state-of-the-art DVD systems packed with GPS navigation to slick rear-view cameras that make parking a breeze, Seicane has got you covered.
And don’t even get us started on their GPS trackers. With these bad boys onboard, you can track your ride in real-time, giving you peace of mind wherever you go. Say goodbye to lost cars and hello to stress-free adventures!
But wait, there’s more! Seicane isn’t just about fancy gadgets; they’re all about the vibes, baby! Their products are built to last, so you can rock out on every road trip without missing a beat.
So, whether you’re embarking on a solo road trip or hitting the highway with your squad, Seicane‘s got everything you need to turn your car into the ultimate party wagon. Say goodbye to boring drives and hello to epic adventures with Seicane by your side!
Ready to rock your ride? Check out Seicane’s full range of automotive audiovisual awesomeness today and let the good times roll!
Seicane, because life’s too short for boring car rides! Get in on the action now!
Recent Comments