Specific installation steps for 2012 2013 2014 Chevrolet S10 navigation system support BT pairing rearview camera

If you are a owner of 2012 2013 2014 Chevrolet S10,I think you should be someone who are interested in upgrading your car stereos.

Actually the operating system of most car stereos are same,so a new stereo may can installed in several cars.A car also has some choices.

Let’s have a look at following image first :it’s head unit after upgrade,DVD GPS navigation system of 2012 2013 2014 Chevrolet S10.

Then you can decide whether to learn specific installation steps for 2012 2013 2014 Chevrolet S10 navigation system support BT pairing rearview camera.

This unit can be installed in your car if it belongs to what is mentioned in the picture.In addition,maybe this stereo can be installed into not only one type car,what can we know whether it’s suitable?All right,you can have a careful watch at its trim panel and make a comparison between factory one and this one,if they are same then the answer is yes.

Some of you may think installing Chevrolet S10 navigation radio in your car by yourself is not possible.However it’s very possible because many car owners who are not professional have achieved this goal by himself,of course it’s under the condition that him or her has made enough preparations for it,such as searching related information and ask workers of this market to get problems solved.Next comes to Chevrolet S10 radio installation.

2012 2013 2014 Chevrolet S10 stereo removal:

1.Gently lever the upper trim housing panel from the dash with a removal tool

 

 

 

 

 

 

 

2.Lever edges of side panel,release and reposition the shifter

 

 

 

 

 

 

3.Make out 2 screws(this screw and the other corresponding one) from the storage pocket,remove car storage

 

 

 

 

 

 

 

 

 

 

 

 

4.Make out 4 screws which are on the accessorv control panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.When you remove this very tough panel you should be patient and the clips will loosen.,then let panel hang to side

 

 

 

 

 

6.Make out 2 screws from radio control panel,unplug the radio control panel

 

 

 

 

 

 

7.Take out the really strange blue clip absolutely before removing the other connector,and remove the latter one

 

 

 

 

 

 

8.Get out 2 screws which are on the radio chassis,and remove the other 2 screws which are near the top of the stereo,in order to fasten the screen

 

 

 

 

 

 

9.Make screen out by pulling,and get behind clip out

 

 

 

 

 

 

10.There are still 2 screws on stereo,remove them from car head unit

 

 

 

 

 

 

 

11.Take stereo and connectors out

 

 

 

 

 

 

2012 2013 2014 Chevrolet S10 DVD nav system installation:

12.Read installation instructions that within you new bought stereo,precisely make cables connection between new stereo with car’

13.After correct connection,install your new unit into your car and turn on it to test whether your actions are all right

13.Fix 2 screws to the stereo and install the dvd player in position

14.Make 2 screws back to the place near top of the stereo,and 2 screws to radio chassis

15.Make other parts back to original place and don’t forget to firm their screws back to them to fix corresponding machine

This is whole process for the installation,and you will succeed only if you can act as above steps carefully.

Please notice that keeping you safe is the most important,if you still account some problems that is difficult to deal with,you can ask someone who knows better for help,wish you good luck.

And you can get more information about new unit from next website: http://www.seicane.com/car-dvd-radio-player-sat-navi-system-for-chevrolet-s10-support-3g-wifi-dvr-video-recording-with-gps-radio-bluetooth-3d-map-file-management-c203-1.