First of all, please look at the following image which is a 2012 2013 2014 Chevy Chevrolet Malibu Bluetooth Radio after installation. It looks very good, isn’t it? If you also own a 2012 2013 2014 Chevy Chevrolet Malibu and plan to upgrade your factory radio with a brand new all-in-one car stereo, you can try to remove the factory radio and install a new stereo on your own. Now I’d like to share a 2012 2013 2014 Chevy Chevrolet Malibu Bluetooth Radio installation guide from Seicane for your reference.
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2012 2013 2014 Chevy Chevrolet Malibu car stereo installation guide
1. Pry the panel around the shift lever with the plastic removal tool.
2. Remove the surrounded trim panel. Please use a plastic removal tool.
3. Use a screwdriver to remove all the screws that fixed the AC control and the radio.
4. Remove all function control panels and the radio.
5. Unplug the connectors at the back of the stereo.
6. Check all the accessories for the new Seicane car stereo.
7. Connect the harnesses to the back of the new Seicane car stereo.
8. Connect the Seicane car stereo to your original stereo’s plugs.
9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car stereo into the dash.
11. Put everything into their original place. All the installation is done.
Wish the above installation guide can do you some help. If you encounter any questions during the whole process of the installation, you can consult your dealer or seek help from a professional. Besides, before the installation, please confirm whether you have a compatible car stereo or not. If not, you can refer to a 2012 2013 2014 Chevy Chevrolet Malibu Bluetooth Radio from Seicane. Here is the link, please click:
Loaded with a wide range of comprehensive functions, this new aftermarket car stereo is an ideal car stereo to replace your factory radio for 2012 2013 2014 Chevy Chevrolet Malibu. You are able to easily get to anywhere you would like to go under the guidance of the turn-by-turn directions and voice prompts provided by its built-in GPS. And you are able to dial, receive or reject hands-free phone calls as well as enjoy Bluetooth music without keeping your hands off the steering wheel when you connect your enabled mobile phone with this car stereo. Wish you like it and good luck to you!