To enhance the capacities in your car as well as upgrade your in-car life, you can easily replace your factory radio with a brand new multifunctional car radio which can support a lot of comprehensive features for you to enjoy more convenience and enjoyment. If you have some experience on the installation, it is easier for you to install a new car radio in your car with a related installation guide. Here I would like to share the detailed 2006-2012 TOYOTA RAV4 car radio installation instruction with you. Wish it is helpful for you.
Precautions for this installation:
1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2. Please make sure that all fastened wires are isolated with electrical tape.
3. Please make sure the ignition is off to avoid short circuit.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006-2012 TOYOTA RAV4 car radio installation instruction
1. The original car radio.
2. Remove the panel by using plastic removal tool.
3. Unplug the hazard warning lights.
4. Remove the left panel and unplug the switch.
5. Unplug the switch.
6. Remove four screws.
7. Pull out the factory radio.
8. The back of the original car radio.
9. Remove 8 screws from original car radio.
10. Remove 2 screws at the top of the new radio.
11. Install 8 screws to new car radio.
12. Plug into factory plugs.
13. All plugs after connection.
14. Check all the accessories for the new Seicane car radio.
15. Connect the harnesses to the back of the new Seicane car radio.
16. Connect the Seicane car radio to your original car radio ‘s plugs.
17. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
18. If the new Seicane car radio works well, put it into the dash.
19. Put everything into their original place, and all the installation is done.
Please don’t worry if you have any doubts about your car radio and your car. To overcome your doubts, you can contact your dealer, or seek help from someone experienced or a professional. Anyway, it is very vital for you to check if your new car radio can fit your car well. If it is not compatible enough, you’d better quit it and buy another suitable one. Here I would like to share a fabulous 2006-2012 TOYOTA RAV4 car radio from Seicane with you. For more details, please click:
Upgraded to the stable Android 6.0 operation system, 8- core 1.5 GHz RK-PX5 A53 processor and 32GB Inland flash as well as 2GB RAM, this unit’s capabilities and performance can be enhanced to a large extent.
You won’t get lost any more since this car radio is equipped with the high-accuracy worldwide real-time GPS navigation system. When you turn on GPS function, you can quickly locate where you are and find the right way to reach your desired destinations according to turn-by-turn directions and voice prompts. And while navigating, you can freely listen to your favorite music thanks to this unit’s dual zone function.
Under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this unit, so you can dial, answer, reject and mute hands-free calls as well as listen to Bluetooth streaming music from your phone music playlists without taking your hands off the steering wheel.
Wish you like this unit and good luck to you!