As you know, at present, there are more and more options for you to enhance your car’s capabilities. And one of the most popular measures you can take is to replace your factory radio with a new multifunctional car radio. With an ideal car radio, you can not only gain a lot of convenience but also enjoy more entertainment features. This article mainly introduce a 2006 2007 2008 2009 2010-2012 MITSUBIHI OUTLANDER car radio installation instruction from Seicane. If you have the same or similar dashboard and plan to upgrade your factory radio, you can refer to this instruction to deal with the installation.
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriverbefore the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006 2007 2008 2009 2010-2012 MITSUBIHI OUTLANDER car radio installation instruction
1. The original car radio.
2. Open the glove box so as to get access to the trim. Then use a plastic removal tool to remove the two trim panels.
3. Use a screwdriver to remove the screws that fix the car radio panel.
4. Try to remove the car radio panel.
5. Remove four screws that are holding the factory radio.
6. Gently take the original car radio out from the dashboard and disconnect the connectors or cables at the back of it.
7. Check all the accessories for the new Seicane car radio.
8. Connect the harnesses to the back of the new Seicane car radio.
9. Connect the Seicane car radio to your original radio’s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
Wish the above installation guide can be helpful for you to some extent. If you have any doubts, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly ask a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to select an ideal car radio for your beloved car radio. If you have no ideas, you can refer to an excellent 2006 2007 2008 2009 2010-2012 MITSUBIHI OUTLANDER car radio that I would like to recommend to you.
This car radio is running on the advanced and stable Android 6.0 operation system and a powerful quad-core CPU processor to enhance its performance so as to provide its users with better service.
Even you are driving around an unfamiliar place, you won’t get lost any longer as long as you turn on GPS function and make full use of it. With its powerful GPS function, you can easily locate where you are and find a right way to reach your destinations through turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to listen to your favorite music while navigating.
Besides, thanks to the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you, therefore, you can gain a lot of convenience and enjoyment.
If you like this car radio, just add it to your shopping cart. Good luck!