Nowadays, there is a trend that more and more car owners would like to replace their factory radio with a new aftermarket car radio. If you have a 2007 2008 2009 2010 2011-2012 Hyundai H1 and want to upgrade your factory radio’s capabilities, then you can find a correct installation guide to help with the installation of your new car radio. This article mainly aims to introduce a detailed 2007 2008 2009 2010 2011-2012 Hyundai H1 car radio installation instruction from Seicane to you. If you have the same or similar dashboard, the following installation guide from Seicane will be helpful for you.
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2007 2008 2009 2010 2011-2012 Hyundai H1 car radio installation instruction
1. Pry the plastic panel with a removal tool.
2. Remove the panel, and disconnect the connectors at the back of the panel.
3. Unscrew three screws securing the panel with a screwdriver.
4. Pry the trim panel shown as below with a removal tool.
5. Remove the trim panel, then disconnect the connectors at the back of the panel.
6. Unscrew all screws securing the original head unit with a screwdriver.
7. Gently take the factory radio out of the dashboard.
8. Disconnect all connectors at the back of the original car radio.
9. Check all the accessories for the new Seicane car radio.
10. Connect the harnesses to the back of the new Seicane car radio.
11. Connect the Seicane car radio to your original radio’s plugs.
12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
13. Put the new Seicane car radio into the dash.
14. Put everything into their original place. All the installation is done.
Now do you have a general understanding of the above installation instruction? If you have any doubts, you may browse some professional websites. Besides, please don’t hesitate to consult your dealer, communicate with someone experienced or seek help from a professional. If you still think it hard for you to install the new car radio by yourself, you’d better straightly go to a car radio upgrade center to ask a technician to help you.
What’s more, is you are still looking for a suitable car radio but don’t know what kind of car radios can fit your car well, you might as well check out the following link which is a 2007 2008 2009 2010 2011-2012 Hyundai H1 car radio from Seicane.
Loaded with the most stable and advanced Android 7.1.1 operation system and a powerful quad-core CPU processor, this car radio can provide its users with higher capabilities and better performance.
When you are driving around an unfamiliar place, even you are not good at identifying directions, you can make full use of the high-accuracy 3D GPS navigation system to locate where you are and navigate to your desired destinations through turn-by-turn directions and voice prompts. And with dual zone function, this car radio enables you to listen to your favorite music while navigating, which can add a lot of fun to your driving.
And for more entertainment, you can turn on this unit’s DVD player function to play amazing videos, TV programs, movies, etc. Thus, you can get a lot of fun while driving.
If you like this car radio, just add it to your shopping cart. Good luck to you!