A Step-by-step Installation Guide for 2002-2008 Mercedes Benz W211 Car Stereo System with Bluetooth GPS Navigation

Here shows you an intelligent 2002-2008 Mercedes Benz W211 car stereo system from Seicane. The product comes with the latest operating system and 8-core CPU for you to upgrade your factory radio.

 

If you are going to replace your factory radio with a new aftermarket car stereo system, it’ll be great for you to know some installation instruction for it. The installation is not quite difficult, if you have some related installation experience and a correct guide, you can easily finish the installation on your own. Please look at the picture above, if you also have the same dashboard, you can refer to the following 2002-2008 Mercedes Benz W211 bluetooth car stereo instruction to help with the installation.

 

Precautions :

1. Please disconnect the power before the installation.
2. Please prepare unlock toolsbefore the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. So each related part of the unit can be fixed securely.

 

2002-2008 Mercedes Benz W211 car stereo installation guide

The original dashboard.

 

Installation step 1. Use a lever to release the decoration panel and remove the cigarette lighter.

 

Installation step 2. Remove two screws under the 6-disc CD changer and take out the CD changer.

 

Installation step 3. Remove the two screws marked with red arrows and pull out the CD player.

 

Installation step 4. Connect the cables in the package.

 

Installation step 5. Remove the baffle-plate under the assistant driver seat, connect the CAN-H, CAN-L cable (green) with the CAN-BUS socket marked in the picture.

 

Installation step 6. Pry the decoration panel beside the driver’s seat, change fuse from 5A TO 10A

 

Installation step 7. Remove the screws for fastening the car pc in the left of the trunk.

 

Installation step 8. Find the amplifier in the left of the trunk and remove the four screws marked with red arrows.

 

Installation step 9. Remove the amplifier in the car.

 

Installation step 10. Connect the speaker cable with the speaker.

 

Installation step 11. Turn on the new Seicane bluetooth car stereo to have a careful check if everything works well.

 

Wish the above installation guide can be helpful for you. If you have any question, you can refer to your dealer or a professional for help. Please make clear every step before you start to install. If you find it too hard to understand all the steps, you’d better go to a car stereo upgrade center to have it installed.

 

In addition, to make sure you have a successful upgrade, you need to confirm that your new stereo is suitable for your car, so that it can work well with your car.

 

With this Android 10.0 Mercedes Benz W211 bluetooth car stereo which is 4G+64G and support touch screen spilt screen display in your car, you are enabled to play DVD, CD, VCD, FM/AM radio, HD 1080P Video, music, etc. The Bluetooth technology also makes you possible to dial and receive calls with your hands on the steering wheel control and your eyes on the road ahead to keep safe. The lane assist, voice prompts and accurate direction provided by the GPS navigation can lead you to your destination within the least time.

 

To improve your in-car environment and your driving experience, this Seicane Mercedes Benz W211 car stereo is just your ideal choice. Just take it and go!