A step-by-step installation guide for a 2002 2003 2004 Chrysler 300M radio with USB SD AUX Rearview Camera IPOD MP3 Dual Zone

2002 2003 2004 Chrysler 300M radio after installation

Nowadays, to upgrade something you want in your car won’t cost you a bank. Therefore, more and more car owners would like to improve their driving experience by replacing their factory radio which is actually the main entertainment center in a car. To help you install your new head unit, I’d like to share a detailed 2002 2003 2004 Chrysler 300M radio installation guide with you. If you find your dashboard is the same as the picture below, then you can take the following instruction as a reference.

2002 2003 2004 Chrysler 300M radio after installation
2002 2003 2004 Chrysler 300M radio after installation

 

 

Tips about the installation:

 

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

 

2002 2003 2004 Chrysler 300M radio installation guide

 

1.Remove the trim piece above cup holder with a lever.

1.Remove the trim piece above cup holder with a lever.
1.Remove the trim piece above cup holder with a lever.

 

2.Remove 2 screws behind the trim piece.

2.Remove 2 screws behind the trim piece.
2.Remove 2 screws behind the trim piece.

 

3.Gently pry around the side of trim panel with the lever and then remove the trim panel.

3.Gently pry around the side of trim panel with the lever and then remove the trim panel.
3.Gently pry around the side of trim panel with the lever and then remove the trim panel.

 

4.Remove 4 screws which holds the factory radio in place.

4.Remove 4 screws which holds the factory radio in place.
4.Remove 4 screws which holds the factory radio in place.

 

5.Take out the factory radio.

5.Take out the factory radio.
5.Take out the factory radio.

 

6.Disconnect the smaller harness on the behind of the factory radio.

6.Disconnect the smaller harness on the behind of the factory radio.
6-1.Disconnect the smaller harness on the behind of the factory radio.
6-2. Check all the accessories for the new Seicane car radio.
6-2. Check all the accessories for the new Seicane car radio.

 

7.Connect the Seicane car radio to your original car radio ‘s plugs.

7. Connect the Seicane car radio to your original car radio 's plugs.
7. Connect the Seicane car radio to your original car radio ‘s plugs.

 

8.Connect the smaller harness at the back of the new radio.

9.Put the new Seicane radio back into the dash.

10.Install four screws and trim panel.

11.Install 2 screws behind the trim piece and the trim piece.

12.Turn on the new radio and have a comprehensive test.

13.Tidy up everything in your car, and all the installation is done.

 

 

Now can you install your new 2002 2003 2004 Chrysler 300M radio under the guidance of this instruction? If not, you can go to a car radio upgrade center to install it or ask a professional for help. If there is any question, you can also consult your dealer.

 

A suitable car radio plays an important role on the upgrade. If you don’t find a fitting radio for your car, I’d like to recommend a wonderful 2002 2003 2004 Chrysler 300M radio from Seicane to you, please click for more details:

 

http://www.seicane.com/2001-2002-2003-2004-2007-chrysler-300m-pt-cruiser-sebring-concorde-grand-voyager-town-country-autoradio-navigation-stereo-cd-dvd-player-bluetooth-music-tv-usb-sd-aux-rearview-camera-ipod-mp3-dual-zone-t6096

 

This Chrysler 300M radio is equipped with the advanced WinCE 6.0 operation system and a powerful Cortex A9 MStar 785 1GHz CPU for you to upgrade your factory radio. This modern radio comes with a number of useful features and entertainment options for you to upgrade your factory radio, which include 3D gps navigation system, bluetooth technology, DVD and CD player, FM/AM radio, wifi, TV, USB port and an SD card slot, etc. The functions of your steering wheel control will still be retained after installation. Just go with it and have a wonderful time!

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *