If you think your factory radio is too outdated to be compatible with some upgraded and modern features, it will be wise of you to upgrade it with a new aftermarket stereo which can be ideal enough to be compatible with a wide of comprehensive features. Now I’d like to share an easy-to-understand 2013 2014 2015 2016 KIA K3 car stereo installation instruction from Seicane with you. If you have the same or similar dashboard and would like to replace your factory radio, you can refer to the following installation instruction.

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2013 2014 2015 2016 KIA K3 car stereo installation instruction

1. Use a plastic removal tool to pry the panel below the AC control and remove the panel.

2. There is one screw on the left bottom, remove it with a screwdriver.

3. Remove the radio trim panel with the plastic removal tool and then unplug the connector at the back of it.

4. Unscrew the screws that are holding the radio on the dashboard.

5. Softly pull out the original car radio.

6. Disconnect connectors and cables at the back of the radio.

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

Wish you can get some inspiration from the above installation instruction. If you have any doubts about the new car radio or the car radio installation process, then you can contact your dealer, communicate with someone experienced or turn to a professional for help.

Besides, it is essential for you to pick an ideal car radio for your beloved car. If you have no ideas, you can refer to a remarkable 2013 2014 2015 2016 KIA K3 car radio from Seicane. Here comes the link, please click:

https://www.seicane.com/hd-touchscreen-android-gps-navigation-radio-for-2013-2016-kia-k3-with-bluetooth-usb-wifi-obd2-mirror-link-rearview-camera-1080p-video-s0487

This unit is modern enough to be compatible with a wide range of comprehensive features, so this unit can be regarded as one of the best replacements for your factory radio.

When you drive around unfamiliar places, even you have no good sense of directions, you can easily locate where you are currently and find the right way to get to your desired destinations under the guidance of the turn-by-turn directions and voice prompts. So you don’t have to worry about getting lost in unfamiliar places. Besides, you can freely listen to your favorite music behind the scene under GPS mode, and the music will automatically switch to GPS voice.

Additionally, you can simply connect your Bluetooth-enabled mobile phone to this car radio so as to enable you to dial, receive, reject and mute hands-free phone calls as well as freely enjoy your favorite music streaming from your phone music playlists without taking your hands off the steering wheel.

Wish you like this unit and good luck to you!

Would you like to enjoy more features from an ideal car radio in your car? If your answer toward this question is “yes”, then you can consider replacing your factory radio with a new multifunctional car radio. If you own a 2011 2012 2013 2014-2015 KIA K2 and plan to install a new car radio to replace your factory radio, then you can take the following 2011 2012 2013 2014-2015 KIA K2 car radio installation guide from Seicane as a reference. Wish it is helpful for you to some extent.

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2011 2012 2013 2014-2015 KIA K2 car radio installation guide

1. The original car radio.

2. Use a plastic removal tool to release the top panel.

3. Pry the trim panel of the radio with a plastic knife and remove it.Unplug the connector at the back of it.

4. Unscrew the screws that are holding the radio on the dashboard.

5. Take out the radio gently.

6. Unplug the connectors and cables at the back of the radio.

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

Now do you have a general understanding of a 2011 2012 2013 2014-2015 KIA K2 car radio installation process? If you have any questions, please don’t hesitate to seek help from your dealer, someone experienced or a professional. Besides, it is very essential for you to pick an ideal car radio for your car. If you have no ideas, here I would like to share an amazing 2011 2012 2013 2014-2015 KIA K2 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-2011-2012-2015-kia-k2-hd-touchscreen-radio-gps-navigation-stereo-with-bluetooth-wifi-usb-1080p-video-tv-mirror-link-s0485

There is no doubt that you will gain a brand new in-car life since this unit is loaded with the advanced Android 6.1 operation system and quad-core CPU processor.

Under the guidance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you are able to easily locate where you are and have the most suitable route option to reach any locations you would like to go to. Besides, thanks to this unit’s dual zone function, this unit enables you to listen to your favorite music behind the scene under GPS mode and the music will automatically switch to GPS voice.

Besides, this unit also support Bluetooth function. As long as you pair your Bluetooth-enabled mobile phone with this multifunctional car radio, you are able to dial, receive, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone playlists.

What are you waiting for? This unit is at a very competitive price now. If you like it, just add it to your shopping cart!