Home › View all posts by john › Page 15

Author: john

Great Tutorial on a 2004 2005 2006 2007-2009 Mazda 3 Radio Removal to Install an Audio Stereo Sound System

Posted on by — 8 Comments ↓ 14,770 views
2004 2005 2006 2007-2009 Mazda 3 Radio after installation

If you would like to pursue a more comfortable and convenient in-car life, it will be one of the most prevailing ways for you to replace your factory radio with a new aftermarket car radio which comes with a wide range of practical and entertainment features. If you know how to install a new ca rradio, you may find it very easy for you to upgrade a car radio. The following is a 2004 2005 2006 2007-2009 Mazda 3 car radio installation instruction from Seicane. If you own the same or similar dashboard, then you can refer to this instruction carefully.

2004 2005 2006 2007-2009 Mazda 3 Radio after installation
2004 2005 2006 2007-2009 Mazda 3 Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2004 2005 2006 2007-2009 Mazda 3 car radio installation instruction

1. Remove the trim panel with a plastic removal tool.

Remove the trim panel with a plastic removal tool
Remove the trim panel with a plastic removal tool
1-1
1-1

2. Remove two screws that fixed the car radio on the dashboard.

Remove two screws that fixed the car radio on the dashboard
Remove two screws that fixed the car radio on the dashboard

3. Take out the original car radio.

Take out the original car radio
Take out the original car radio

4. Unplug connectors at the back of the original car radio.

Unplug connectors at the back of the original car radio
Unplug connectors at the back of the original car radio
4-1
4-1

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car radio to your original radio’s plugs.

8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car radio into the dash.

10. Put everything into their original place. All the installation is done.

 

Now do you have a general understanding of the above installation steps? If you meet any problems about either the car radio installation process pr the car radio, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. You can straightly go to a car radio upgrade center and get the new car radio installed by a professional technician.

Besides, it is especially significant for you to pick an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is an amazing 2004 2005 2006 2007-2009 Mazda 3 car radio from Seicane. For more details, please click:

https://www.seicane.com/android-2004-2009-mazda-3-gps-navigation-car-radio-with-bluetooth-3g-wifi-usb-touch-screen-rearview-camera-mirror-link-obd2-s0477

With this car radio installed in your beloved car, you will definitely embrace a brand new driving experience so as to enjoy more convenience and enjoyment.

Under the guidance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you are able to easily locate where you are and navigate to any locations you would like to go to without getting lost any more.

Additionally, under the wireless Bluetooth technology, you can make your Bluetooth-enabled mobile phone pair with this car radio. By doing so, you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from phone without taking your hands off the steering wheel control.

Wish you like this unit and good luck to you!

Top Remove and Upgrade tutorial for a 2004 2005 2006 2007-2010 Toyota Sienna GPS Navigation Bluetooth WIFI Car Stereo

Posted on by — 2 Comments ↓ 3,877 views
2004 2005 2006 2007 -2010 Toyota Sienna Car Stereo after installation

There is no doubt that a car radio can play a very significant part in driving experience. If you are not so satisfied with your outdated factory radio due to its simple functions, it is suggested that you should upgrade your factory radio by installing a new aftermarket car stereo. To achieve the whole installation process, you need a detailed installation instruction to guide you. Here I would like to share an easy-to-understand installation instruction on a 2004 2005 2006 2007-2010 Toyota Sienna car stereo from Seicane with you. Wish you can get some help from this instruction.

2004 2005 2006 2007 -2010 Toyota Sienna Car Stereo after installation
2004 2005 2006 2007 -2010 Toyota Sienna Car Stereo after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2004 2005 2006 2007-2010 Toyota Sienna car stereo installation instruction

1. The original car radio for 2004-2010 Toyota Sienna.

The original car radio for 2004-2010 Toyota Sienna
The original car radio for 2004-2010 Toyota Sienna

2. Use a flat-head screwdriver or a flat pry tool to pry up the vertical panels of the right and left side of the original car radio and climate control system.

Use a flat-head screwdriver or a flat pry tool to pry up the vertical panels of the right and left side of the original car radio and climate control system
Use a flat-head screwdriver or a flat pry tool to pry up the vertical panels of the right and left side of the original car radio and climate control system

3. Disconnect the wiring from the side panels. There are two wiring connectors on the left panel and only one connector on the right panel. Please carefully press the tab to release the connectors.

Disconnect the wiring from the side panels. There are two wiring connectors on the left panel and only one connector on the right panel. Please carefully press the tab to release the connectors
Disconnect the wiring from the side panels. There are two wiring connectors on the left panel and only one connector on the right panel. Please carefully press the tab to release the connectors
3-1
3-1

4. Remove the center channel speaker grill panel above the car radio. Please use a pry tool or a flat head screwdriver to pry up the top (center channel speaker) panel above the car radio and then remove it.

Remove the center channel speaker grill panel above the car radio. Please use a pry tool or a flat head screwdriver to pry up the top (center channel speaker) panel above the car radio and then remove it
Remove the center channel speaker grill panel above the car radio. Please use a pry tool or a flat head screwdriver to pry up the top (center channel speaker) panel above the car radio and then remove it
4-1
4-1

5. Remove the center speaker. There are two 10mm hex head nuts securing the center speaker, so you need to use a 10-mm Hollow-Shank nut screwdriver to remove these two bolts.

Remove the center speaker. There are two 10mm hex head nuts securing the center speaker, so you need to use a 10-mm Hollow-Shank nut screwdriver to remove these two bolts
Remove the center speaker. There are two 10mm hex head nuts securing the center speaker, so you need to use a 10-mm Hollow-Shank nut screwdriver to remove these two bolts

6. Disconnect the speaker wiring harness. Please press the tab down so as to release the wiring connector, and then set the speaker and bolts aside.

Disconnect the speaker wiring harness. Please press the tab down so as to release the wiring connector, and then set the speaker and bolts aside
Disconnect the speaker wiring harness. Please press the tab down so as to release the wiring connector, and then set the speaker and bolts aside

7. Remove the 4 10mm hex head nuts from the car radio. There are 4 bolts holding the car radio in the dash (2 on each side). Please use a screwdriver to remove these four bolts.

Remove the 4 10mm hex head nuts from the car radio. There are 4 bolts holding the car radio in the dash (2 on each side). Please use a screwdriver to remove these four bolts
Remove the 4 10mm hex head nuts from the car radio. There are 4 bolts holding the car radio in the dash (2 on each side). Please use a screwdriver to remove these four bolts
7-1
7-1

8. Gently pull the original car radio out of the dash and then disconnect the wiring from the original car radio. Then put the original car radio aside.

Gently pull the original car radio out of the dash and then disconnect the wiring from the original car radio. Then put the original car radio aside
Gently pull the original car radio out of the dash and then disconnect the wiring from the original car radio. Then put the original car radio aside
8-1
8-1

9. If necessary, please remove the left and right radio mounting brackets to install on the new Seicane car radio.

If necessary, please remove the left and right radio mounting brackets to install on the new Seicane car radio
If necessary, please remove the left and right radio mounting brackets to install on the new Seicane car radio

10. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

11. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

12. Connect the Seicane car radio to your original car radio’s plugs.

Connect the Seicane car radio to your original car radio's plugs
Connect the Seicane car radio to your original car radio’s plugs

13. Gently place the new Seicane car radio into the opening of the dash and test it.

14. Re-seat the stereo in the dash and reinstall the 4 bolts.

15. Carefully reconnect the center speaker and reinstall the 2 bolts.

Carefully reconnect the center speaker and reinstall the 2 bolts
Carefully reconnect the center speaker and reinstall the 2 bolts

16. Carefully reinstall top center channel speaker grill panel.

Carefully reinstall top center channel speaker grill panel
Carefully reinstall top center channel speaker grill panel

17. Reconnect all the electrical connectors and then reinstall the left and right side panels.

 

Don’t worry if you encounter any problems before or during the installation. To deal with these problems, you can try to seek help from your dealer, someone experienced or turn to a professional for help. If you still think it hard for you to remove your factory radio and install the new car radio, you can directly go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. Anyway, it is essential for you to select an ideal car radio before installation, if you have no ideas, here I would like to recommend a remarkable 2004 2005 2006 2007-2010 Toyota Sienna car stereo from Seicane to you. Wish you will like it. For more details, please click:

https://www.seicane.com/android-gps-navigation-system-for-2004-2010-toyota-sienna-with-dvd-player-backup-camera-hd-touch-screen-3g-wifi-steering-wheel-control-bluetooth-s063812y

With this remarkable car radio installed in your car, your driving experience will absolutely be taken up a notch. This car radio is loaded with the most advanced Android 8.0 operations system and a powerful eight-core CPU processor, which will enables you to have a much smoother, faster and easier operation experience.

Under the guidance of the turn-by-turn directions and voice prompts provided by the worldwide real-time GPS navigation system, this unit enables you to easily locate where you are and help you find the right way to get to any locations you would like to go to. And this unit also comes with dual zone function, which enables you to listen to your favorite music while navigating.

Additionally, you are able to dial, receive, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone music playlist as long as you connect your Bluetooth-enabled mobile phone to this unit.

Wish you like this car radio. Good luck!

How to Upgrade a 2005 2006 2007 2008-2013 Suzuki Vitara Car Stereo with Aux Input Bluetooth Navigation System

Posted on by — 7 Comments ↓ 4,562 views
2005 2006 2007 2008-2013 Suzuki Vitara Car Stereo after installation

If you would like to make your car get more featured, it will be a great idea for you to replace your factory radio with a brand new multifunctional car radio. And about the removal and installation, if you would like to have a try, you can search for a related installation instruction and refer to it carefully. The following is a 2005 2006 2007 2008-2013 Suzuki Vitara car radio installation instruction from Seicane, which I would like to share with you. If you own the same or similar dashboard, you can carefully follow this instruction to deal with the installation.

2005 2006 2007 2008-2013 Suzuki Vitara Car Stereo after installation
2005 2006 2007 2008-2013 Suzuki Vitara Car Stereo after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2005 2006 2007 2008-2013 Suzuki Vitara car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Open the storage box. Grasp two side panels and remove them. Please use a plastic removal tool if necessary.

3. Unscrew mounting screws that are holding the radio and the AC control.

Unscrew mounting screws that are holding the radio and the AC control
Unscrew mounting screws that are holding the radio and the AC control
3-1
3-1

4. Pull the original radio out from the dash.

Pull the original radio out from the dash
Pull the original radio out from the dash

5. Unplug the connectors and cables at the back of the radio.

Unplug the connectors and cables at the back of the radio
Unplug the connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Wish you can get some skills from the above installation instruction. If you come across any problems, you can consult your dealer, communicate with someone experienced or turn to a professional for help. Or you can straightly go to a car radio upgrade center to ask a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to select an ideal car radio before installation. If you have no ideas, here I would like to share an amazing 2005 2006 2007 2008-2013 Suzuki Vitara car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-radio-gps-navigation-system-for-2005-2013-suzuki-vitara-with-dvd-player-bluetooth-hd-1024-600-touch-screen-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-ipod-mirror-link-steering-wheel-control-usb-sd-s167056g

Upgraded to the most advanced Android 8.0 operation system and a powerful eight-core CPU processor, this car radio specific for 2005 2006 2007 2008-2013 Suzuki Vitara will make your operation get much smoother, faster and easier.

With the assistance of the world-wide real-time GPS navigation system of high-precision, according to turn-by-turn directions and voice prompts, you are able to locate your current locations accurately and quickly plan the most suitable route to get to your desired destinations.

Besides, when you add a one DIN DVD player to this car radio, you can freely play your favorite music, TV programs, videos, movies, etc, which will add a lot of joyfulness to your trip.

This car radio is at a reasonable price right now. If you like it, just don’t hesitate to add it to your shopping cart.

How to Install a 1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i Car Stereo to Fix Radio Problems in an Effective Way

Posted on by — No Comments ↓ 3,794 views
1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i Car Stereo after installation

Have you ever thought about removing your factory radio and installing a brand new multifunctional car radio for your beloved car? If yes, you can search online for a related car radio and read it carefully to have a general understanding of the car radio installation. The following is a 1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i car radio installation guide from Seicane, which can be taken as your reference if you own the same or similar dashboard. Wish this guide is helpful for you.

1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i Car Stereo after installation
1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i Car Stereo after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i car stereo installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Remove the surrounding trim panel with a plastic removal tool.

Remove the surrounding trim panel with a plastic removal tool
Remove the surrounding trim panel with a plastic removal tool
2-1
2-1
2-2
2-2

3. Remove two screws fixed the radio on the dashboard.

Remove two screws fixed the radio on the dashboard
Remove two screws fixed the radio on the dashboard
3-1
3-1

4. Gently pull out the original car radio.

Gently pull out the original car radio
Gently pull out the original car radio

5. Unplug the connectors and cables at the back of the radio.

Unplug the connectors and cables at the back of the radio
Unplug the connectors and cables at the back of the radio

6. Remove the A/C control and unplug the connectors.

Remove the A/C control and unplug the connectors
Remove the A/C control and unplug the connectors
6-1
6-1

7. Remove two screws holding the heat vent.

Remove two screws holding the heat vent
Remove two screws holding the heat vent
7-1
7-1

8. Remove screws so as to remove radio frame.

Remove screws so as to remove radio frame
Remove screws so as to remove radio frame

9. Check all the accessories for the new Seicane car radio.

10. Connect the harnesses to the back of the new Seicane car radio.

11. Connect the Seicane car radio to your original radio’s plugs.

12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane car radio into the dash.

14. Put everything into their original place. All the installation is done.

 

Wish the above installation guide can be helpful for your installation to some degree. If you encounter any problems you cannot deal with by yourself, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to finish the whole installation process, you’d better arrange a technician to help you install the new car radio.

Besides, it is very crucial for you to select an ideal car radio for your beloved car. If you have no ideas, you can refer to the following link which is an amazing 1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i car radio from Seicane. Here comes the related link, please click:

https://www.seicane.com/radio-hd-touchscreen-android-for-1998-2006-bmw-3-series-m3-e46-316i-318i-320i-323i-325i-gps-navigation-system-with-wifi-bluetooth-usb-mirror-link-rearview-aux-s129006e

This car radio is running on the newest Android 8.0 operation system, a high-quality 8-core 1.5 GHz RK-PX5 A53 processor, and 32GB INand Flash as well as 4GB RAM. With this car radio installed in your car, you will embrace a brand new driving life.

Even though you are not good at identifying directions, you won’t get lost any more thanks to this car radio. Under the guidance of the turn-by-turn directions and voice prompts provided by the worldwide real-time GPS navigation system, you are able to locate where you are currently and find the right way to arrive at your desired destinations. And this unit comes with dual zone function, so you can freely listen to your favorite music while navigating.

Additionally, under the wireless Bluetooth technology, without taking your hands off the steering wheel, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you as long as you pair your Bluetooth-enabled mobile phone with this unit.

If you like this unit, just don’t hesitate to add it to your shopping cart.

How to Upgrade 2011 2012 2013 2014 2015 2016 JEEP Wrangler Car Stereo with GPS Navigation Bluetooth Audio System

Posted on by — No Comments ↓ 2,502 views
2011 2012 2013 2014 2015 2016 JEEP Wrangler Car Stereo after installation

As a car owner of a 2011 2012 2013 2014 2015 2016 JEEP Wrangler, are you still looking for some way to take your driving experience up a notch? As far as I am concerned, it will be a great choice for you to remove your factory radio and install a new aftermarket car radio under a correct installation guide. This article aims to introduce how to remove the factory radio and install the new car radio for 2011 2012 2013 2014 2015 2016 JEEP Wrangler. You may refer to it carefully.

2011 2012 2013 2014 2015 2016 JEEP Wrangler Car Stereo after installation
2011 2012 2013 2014 2015 2016 JEEP Wrangler Car Stereo after installation

Here are some tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and www.seicane.com make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, you can shop at Seicane.

 

2011 2012 2013 2014 2015 2016 JEEP Wrangler car radio installation instruction

1. Get the window control out of the original place, so that you can get access to the screw that is behind it.

Get the window control out of the original place, so that you can get access to the screw that is behind it
Get the window control out of the original place, so that you can get access to the screw that is behind it

2. Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control.

Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control
Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control
2-1
2-1

3. You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out.

You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out
You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out
3-1
3-1

4. There is a clip and you need to push it down and make it come right off, after that, put this window control to the side.

There is a clip and you need to push it down and make it come right off, after that, put this window control to the side
There is a clip and you need to push it down and make it come right off, after that, put this window control to the side
4-1
4-1
4-2
4-2
4-3
4-3

5. Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray.

Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray
Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray
5-1
5-1
5-2
5-2

6. Next you are going to pull away the trim under the steering wheel.

Next you are going to pull away the trim under the steering wheel
Next you are going to pull away the trim under the steering wheel
6-1
6-1

7. With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set.

With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set
With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set

8. Firmly pull the dash and it should be clipped out.

Firmly pull the dash and it should be clipped out
Firmly pull the dash and it should be clipped out
8-1
8-1

9. With the dash removed, you now can have access to the four bolts that are holding the original car radio.

With the dash removed, you now can have access to the four bolts that are holding the original car radio
With the dash removed, you now can have access to the four bolts that are holding the original car radio

10. Remove these four bolts with the seven millimeter screwdriver.

Remove these four bolts with the seven millimeter screwdriver
Remove these four bolts with the seven millimeter screwdriver

11. With all the bolts removed, the original car radio should simply slide out from the original place.

With all the bolts removed, the original car radio should simply slide out from the original place
With all the bolts removed, the original car radio should simply slide out from the original place
11-1
11-1

12. Disconnect the factory connectors and wires at the back of the original car radio.

Disconnect the factory connectors and wires at the back of the original car radio
Disconnect the factory connectors and wires at the back of the original car radio

13. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

14. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

15. Connect the Seicane car radio to your original radio’s plugs.

16. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane car radio into the dash.

18. Put everything into their original place. All the installation is done.

 

Above is the whole installation process about 2011 2012 2013 2014 2015 2016 JEEP Wrangler car radio. Before removal and installation, make sure you are clear about every detailed step. If you cannot totally understand these steps, you can seek help from your dealer, someone experienced or a professional. While for the selection of an ideal car radio, if you have no ideas, here I would like to share an amazing 2011 2012 2013 2014 2015 2016 JEEP Wrangler car radio from Seicane with you.

This car radio is running on the stable Android 10.0 operation system, and it has 4G RAM and 64G ROM, so it can provide its users with smoother, faster and easier operation experience.

Under the guidance of the high-end 3D GPS navigation system, this amazing car radio enables you to locate where you are currently and find the right way to reach your desired destinations. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Additionally, the wireless Bluetooth technology for hands-free calls and streaming music is also supported by this unit to promise your driving safety and enjoyment as long as you connect your Bluetooth-enabled mobile phone to this unit.

What’s more, this unit can support the steering wheel control, headlamp output, reverse output and ACC output. And this unit can support hand brake detecting, the door information display and the original car’s amplifier.

Don’t hesitate to add it to your shopping cart if you like this unit! Good luck to you!

Top Tricks on a 1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) GPS Bluetooth Car Stereo Installation

Posted on by — 4 Comments ↓ 5,226 views
1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) GPS Bluetooth Car Stereo after installation

Nowadays, there is a trend that more and more car owners would like to replace their factory radio with a new aftermarket car radio, which can help them gain convenience and entertainment so as to enrich their in-car life. The following is a 1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) car radio installation guide from Seicane for a 1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) car radio. If you have the same or similar dashboard, you may read it carefully to deal with the installation.

1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) GPS Bluetooth Car Stereo after installation
1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) GPS Bluetooth Car Stereo after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) car radio installation guide

1. The original car radio.

The original car radio
The original car radio

2. Place the key in the ignition, set the parking brake and shift to a lower gear depressing the brake.

3. Open up the pocket down below the AC control and remove two T20 Torx screws on the two corners. Then remove the pocket.

Open up the pocket down below the AC control and remove two T20 Torx screws on the two corners. Then remove the pocket
Open up the pocket down below the AC control and remove two T20 Torx screws on the two corners. Then remove the pocket

4. Grasp the bottom of the radio trim panel while prying the edges of the panel up along the sides of the dash. Then remove the panel.

Grasp the bottom of the radio trim panel while prying the edges of the panel up along the sides of the dash. Then remove the panel
Grasp the bottom of the radio trim panel while prying the edges of the panel up along the sides of the dash. Then remove the panel

5. Remove four T20 Torx screws that are holding the radio on the dashboard.

Remove four T20 Torx screws that are holding the radio on the dashboard
Remove four T20 Torx screws that are holding the radio on the dashboard

6. Pull the car radio out from the dash.

Pull the car radio out from the dash
Pull the car radio out from the dash

7. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio
Disconnect the connectors and cables at the back of the radio

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your originalradio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place. All the installation is done.

 

Before installation, please make clear every detailed step. If you have any doubts, please don’t hesitate to seek help from your dealer, someone experienced or a professional. Besides, if you still think it hard for you to install the new car radio, you can directly go to a car radio upgrade center and get the new car radio installed by a professional. Anyway, before installation, please carefully pick an ideal car radio for your beloved car. Here I would like to share a remarkable 1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-radio-hd-touchscreen-gps-navigation-for-1998-2005-mercedes-benz-cl-class-w215-cl600-cl550-cl55-amg-with-bluetooth-music-audio-aux-usb-wifi-steering-wheel-control-mirror-link-1080p-s6913g

Based on the advanced Android 8.0 operation system and a high-quality eight-core CPU processor, this all-in-one car radio can replace your factory radio because of its higher and better performance and configuration.

Thanks to the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you. So you can gain great convenience and entertainment.

Additionally, thanks to the worldwide real-time GPS navigation system, you are able to know where you are currently and get the most suitable route option to reach your desired destinations. And this unit comes with dual zone function, which enables you to listen to your favorite music while navigating.

If you like this car radio, don’t hesitate to add it to your shopping cart. Good luck!

How to Upgrade and Install a 2009 2010 2011 2012 2013 SEAT IBIZA Bluetooth GPS Sat Nav Car Radio with Touch Screen USB WIFI Mirror Link

Posted on by — 7 Comments ↓ 7,946 views
2009 2010 2011 2012 2013 SEAT IBIZA car radio after installation

Have you ever tried to remove your factory radio and install a new car radio before? If not, you may think the whole removal and installation process of a car radio is difficult. Actually, nowadays most car radios are plug and play, and their removal and installation process is not complicated. If you own a 2009 2010 2011 2012 2013 SEAT IBIZA and would like to replace your factory radio, you can refer to the following 2009 2010 2011 2012 2013 SEAT IBIZA car radio installation instruction from Seicane. Wish it is helpful for you.

2009 2010 2011 2012 2013 SEAT IBIZA car radio after installation
2009 2010 2011 2012 2013 SEAT IBIZA car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2009 2010 2011 2012 2013 SEAT IBIZA car radio installation instruction

1. Pry along the front panel with a lever, loosen it with your hands at the same time, after that, and please remove the panel with your hands.

Pry along the front panel with a lever, loosen it with your hands at the same time, after that, and please remove the panel with your hands
Pry along the front panel with a lever, loosen it with your hands at the same time, after that, and please remove the panel with your hands
1-1
1-1

2. Remove four screws holding the radio in the dashboard with a screw driver.

Remove four screws holding the radio in the dashboard with a screw driver
Remove four screws holding the radio in the dashboard with a screw driver

3. Take the factory radio out of the dashboard.

Take the factory radio out of the dashboard
Take the factory radio out of the dashboard

4. Disconnect the connectors at the back of the factory radio.

Disconnect the connectors at the back of the factory radio
Disconnect the connectors at the back of the factory radio

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car radio to your original car radio’s plugs.

8. Put the new Seicane car radio into the dash.

9. Turn on the new Seicane car radio and check whether the radio is working properly. If not, please check whether all the cables are connected correctly.

10. Put the new Seicane radio into the dash.

11. Firm all screws and the panels into their original place.

 

Please don’t be worried if you encounter any problems during the installation. To solve these problems, you can seek help from your dealer, someone experienced or turn to a professional for help. If you are afraid of making damage to either your car radio or your car, it is suggested that you can arrange a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to pick an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is an amazing 2009 2010 2011 2012 2013 SEAT IBIZA car radio from Seicane. For more details, please click:

https://www.seicane.com/2-din-radio-android-dvd-player-bluetooth-gps-navigation-system-for-2009-2010-2011-2012-2013-seat-ibiza-usb-sd-ipod-mirror-link-wifi-stereo-support-steering-wheel-control-rearview-camera-dvr-s6946g

This intelligent car radio is loaded with the most advanced Android 8.0 operation system and a powerful eight-core CPU processor as well as 4GB RAM. Therefore, with such an ideal car radio installed in your car, you will enjoy a much smoother, faster and easier operation experience thanks to its enhanced capacities, higher configuration and better performance.

With the assistance of the high-accuracy 3D GPS navigation function, you don’t need to worry about getting lost any more even though you don’t have a good sense of directions. Through the turn-by-turn directions and voice prompts offered by 3D GPS navigation system, you can easily locate where you are and find the right way to get to your destinations.

And what’s more, under the wireless Bluetooth technology, you can freely dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone.

Wish you like this unit and good luck to you!

How to Replace a 2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 Bluetooth GPS Car Stereo with HD Multi-touch Screen DVR Steering Wheel Control

Posted on by — No Comments ↓ 10,870 views
2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 car stereo after installation

Do you yearn for upgrading your factory radio with a new multi-functional car stereo on your own? If you would like to have a try, you just need to remove your original car radio and install a new car radio under the correct installation guide. The following is a 2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 car radio installation guide from Seicane. If you have the same or similar dashboard, you can refer to this guide carefully.

2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 car stereo after installation
2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 car stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 Bluetooth GPS Car Stereo Installation Guide

1. The original car radio.

The original car radio
The original car radio

2. Start from the bottom shifter. Remove the shifter and disconnect the connector at the back of it.

Start from the bottom shifter. Remove the shifter and disconnect the connector at the back of it
Start from the bottom shifter. Remove the shifter and disconnect the connector at the back of it
2-1
2-1

3. Remove the center button for the heater control panel.

Remove the center button for the heater control panel
Remove the center button for the heater control panel
3-1
3-1

4. Gently remove the heater control panel.

Gently remove the heater control panel
Gently remove the heater control panel

5. Disconnect the connectors at the back of the heater control panel.

Disconnect the connectors at the back of the heater control panel
Disconnect the connectors at the back of the heater control panel

6. Underneath the original car radio, there are four screws, just remove them so as to take out the original car radio.

Underneath the original car radio, there are four screws, just remove them so as to take out the original car radio
Underneath the original car radio, there are four screws, just remove them so as to take out the original car radio
6-1
6-1

7. Make the new car stereo clip into the original air vent.

Make the new car stereo clip into the original air vent
Make the new car stereo clip into the original air vent

8. Make sure that all connectors and cables are plugged to each other correctly.

Make sure that all connectors and cables are plugged to each other correctly
Make sure that all connectors and cables are plugged to each other correctly

For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram.

8-1
8-1

9. Well put the new car stereo into the dashboard.

Well put the new car stereo into the dashboard
Well put the new car stereo into the dashboard

10. Plug the connectors to the heater control panel’s interfaces.

Plug the connectors to the heater control panel's interfaces
Plug the connectors to the heater control panel’s interfaces

11. Place the panel to the original place and fix the screw. And put the shifter back, make sure the connector is connected back as well.

Place the panel to the original place and fix the screw. And put the shifter back, make sure the connector is connected back as well
Place the panel to the original place and fix the screw. And put the shifter back, make sure the connector is connected back as well
11-1
11-1

 

Wish the above installation guide can do some help for you. If you come across any problems, you can seek help from your dealer, communicate with someone experienced or turn to a professional for help. Additionally, if you are afraid of making damage to either your car radio or your car, you can also directly go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. While for the selection of an ideal car radio, if you have no ideas, here I would like to share an amazing 2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 car stereo from Seicane with you. For more details, please click:

https://www.seicane.com/oem-2004-2005-2006-2007-toyota-corolla-radio-gps-navigation-android-stereo-support-audio-system-bluetooth-music-1080p-video-aux-dab-mirror-link-usb-sd-dvrwifi-s32512g

This amazing car stereo can be regarded as one of the best road companions for you since it comes with both practical and entertainment features.

With the guidance of the high-end 3D GPS navigation system, you are able to easily know your current locations and find the best route t o reach your ideal destinations through turn-by-turn directions and voice prompts. Besides, this unit comes with dual zone function which enables you to listen to your favorite music while navigating.

Additionally, under the wireless Bluetooth technology, you are able to get access to Bluetooth hands-free phone calls and Bluetooth streaming music from your mobile phone as long as you connect your Bluetooth-enabled mobile phone to this unit. Therefore, you can gain both convenience and enjoyment thanks to this car stereo.

Don’t hesitate to take this unit right now if you like it.

How to Install and Upgrade a 2014 2015 2016 Subaru Forester Car Radio with Bluetooth GPS Navigation System

Posted on by — 6 Comments ↓ 30,990 views
2014 2015 2016 Subaru Forester Car Radio after installation

How hard is it for a car owner to remove his factory radio so as to install a new car radio? People who would like to enjoy more convenience and enjoyment in car may want to know the answer toward this question. As far as I am concerned, it is not complicated for you to remove your factory radio and install a new car radio under the guidance of a correct car radio installation instruction. The following is a 2014 2015 2016 Subaru Forester car radio installation instruction, which can be taken as your reference if you own the same or similar dashboard and would like to upgrade your factory radio.

2014 2015 2016 Subaru Forester Car Radio after installation
2014 2015 2016 Subaru Forester Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2014 2015 2016 Subaru Forester car radio installation instruction

1. Use a plastic removal tool to pry the trim panel of the original car radio.

Use a plastic removal tool to pry the trim panel of the original car radio
Use a plastic removal tool to pry the trim panel of the original car radio

2. Disconnect the connectors at the back of the trim panel.

Disconnect the connectors at the back of the trim panel
Disconnect the connectors at the back of the trim panel

3. Use a screwdriver to unscrew all the screws that are holding the original car radio in the dashboard.

Use a screwdriver to unscrew all the screws that are holding the original car radio in the dashboard
Use a screwdriver to unscrew all the screws that are holding the original car radio in the dashboard
3-1
3-1

4. Gently take the original car radio out from the dashboard.

Gently take the original car radio out from the dashboard
Gently take the original car radio out from the dashboard

5. Disconnect the connectors and cables at the back of the original car radio.

Disconnect the connectors and cables at the back of the original car radio
Disconnect the connectors and cables at the back of the original car radio

6. Make the original car’s connector plug to the new car radio’s power connector. And Make sure the rest of connectors and cables are plugged to the radio’s right interfaces.

Make the original car's connector plug to the new car radio's power connector. And Make sure the rest of connectors and cables are plugged to the radio's right interfaces
Make the original car’s connector plug to the new car radio’s power connector. And Make sure the rest of connectors and cables are plugged to the radio’s right interfaces

7. For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram.

For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram
For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram

8. Make the connector plug to the back of the trim panel of the new car radio.

Make the connector plug to the back of the trim panel of the new car radio
Make the connector plug to the back of the trim panel of the new car radio

9. Carefully place the new car radio in the dashboard.

10. Put everything into their original place. All the installation is done.

 

Wish the above installation instruction is helpful for you to some extent. If you encounter any difficulties and don’t know how to overcome them, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or for avoiding damage to either your car radio or your car, you can directly go to a car radio upgrade center so as to get the new car radio installed by a professional technician. Anyway, first of all, you have to pick an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is a great 2014 2015 2016 Subaru Forester car radio from Seicane.

https://www.seicane.com/android-hd-touchscreen-in-dash-radio-for-2014-2015-2016-subaru-forester-gps-navigation-bluetooth-music-usb-audio-system-support-backup-camera-digital-tv-1080p-video-dvr-steering-wheel-control-s169208g


This car radio is running on the most advanced and stable Android 8.0 operation system and a 8-core 1.5 GHz RK-PX5 A53 processor to enhance its capacities and performance. So this car radio can be regarded as one of the best replacements for your factory car radio.

With this car radio installed in your car, you can get access to the high-end 3D GPS navigation system, Bluetooth function,and other functions. Under the guidance of the turn-by-turn directions and voice prompts provided by the worldwide real-time GPS navigation system, you can easily locate where you are and gain the most suitable route option to reach your desired destinations. And thanks to this unit’s dual zone function, you can freely listen to your favorite music while navigating.

Additionally, without keeping your hands off the steering wheel, Bluetooth hands-free phone calls and Bluetooth streaming music are available for you as long as you connect your Bluetooth-enabled mobile phone and this car radio.

What are you waiting for? If you like this unit, you can add this unit to your shopping cart!

The Quick Tutorial to Install a Universal Toyota Nissan KIA GPS Bluetooth Car Radio

Posted on by — No Comments ↓ 2,695 views
Universal Toyota Nissan KIA car radio after installation

With the rapid development of technology, nowadays more and more car owners tend to remove their outdated factory radio and install a new multifunctional car radio to enhance their car’s capabilities so as to upgrade their in-car life. If you also want to upgrade your in-car life, you can consider replacing your factory radio with a brand new multifunctional car radio. The following is an easy-to-understand Universal Toyota Nissan KIA car radio installation guide from Seicane, which can be taken as your reference if you own the same or similar dashboard.

Universal Toyota Nissan KIA car radio after installation
Universal Toyota Nissan KIA car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

Universal Toyota Nissan KIA car radio installation guide

1. The original car radio.

The original car radio
The original car radio

2. Prepare a flat plastic removal tool and use it to pry the air vent.

Prepare a flat plastic removal tool and use it to pry the air vent
Prepare a flat plastic removal tool and use it to pry the air vent

3. Gently remove the air vent and put it aside.

Gently remove the air vent and put it aside
Gently remove the air vent and put it aside

4. Use a screwdriver to remove the four screws that are holding the car radio.

Use a screwdriver to remove the four screws that are holding the car radio
Use a screwdriver to remove the four screws that are holding the car radio

5. Gently pull the original car radio out from the original car radio.

Gently pull the original car radio out from the original car radio
Gently pull the original car radio out from the original car radio

6. Disconnect all the connectors and cables at the back of the original car radio.

Disconnect all the connectors and cables at the back of the original car radio
Disconnect all the connectors and cables at the back of the original car radio

7. Remove the original car radio fascia since you will use it later.

Remove the original car radio fascia since you will use it later
Remove the original car radio fascia since you will use it later

8. Make the new car radio and the original fascia get together.

Make the new car radio and the original fascia get together
Make the new car radio and the original fascia get together

9. Make the original car’s connector plug to the new car radio’s power connector. And Make sure the rest of connectors and cables are plugged to the radio’s right interfaces.

Make the original car's connector plug to the new car radio's power connector. And Make sure the rest of connectors and cables are plugged to the radio's right interfaces
Make the original car’s connector plug to the new car radio’s power connector. And Make sure the rest of connectors and cables are plugged to the radio’s right interfaces
9-1
9-1
9-2
9-2

10. For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram.

For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram
For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram

11. Carefully place the new car radio, tighten the screws that hold the car radio with a screwdriver.

Carefully place the new car radio, tighten the screws that hold the car radio with a screwdriver
Carefully place the new car radio, tighten the screws that hold the car radio with a screwdriver

12. Put everything into their original place. All the installation is done.

 

Wish the above installation guide can be helpful for you to some extent. If you have any doubts, please feel free to contact your dealer, communicates with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician from a car radio upgrade center to help you install the new car radio. Anyway, it is essential for you to select an ideal car radio first of all. If you have no ideas, you can refer to the following link which is a remarkable Universal Toyota Nissan KIA car radio from Seicane. For more details, please click:

https://www.seicane.com/android-universal-aftermarket-autoradio-gps-car-a-v-system-with-dvd-player-radio-rds-bluetooth-mirror-link-obd2-touch-screen-3g-wifi-steering-wheel-control-s6938g

This car radio is integrated with a wide range of comprehensive features to meet your different needs in your car, which mainly include 3D GPS navigation system, FM/AM radio tuner, Bluetooth hands-free phone calls, Bluetooth streaming music, AUX, steering wheel control, USB/SD card connection, file management, etc.

With this car radio installed in your car, under the guidance of the worldwide real-time GPS navigation system, you are able to easily know your current locations and navigate to your desired destinations through the turn-by-turn directions and voice prompts. Besides, thanks to this unit’s dual zone function, you can also listen to your favorite music while navigating, and the music will automatically switch to GPS voice.

Besides, under the wireless Bluetooth technology, this car radio enables you to pair your Bluetooth-enabled mobile phone with this car radio, so you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as freely listen to your favorite music streaming from your phone music playlists, which can add a lot of convenience and enjoyment to your journey.

What are you waiting for? If you like this unit, just add it to your shopping cart right now!