Home › View all posts by john › Page 16

Author: john

How to remove a 2009 2010 2011 2012-2013 SUBARU OUTBACK Factory Radio to Install a New Aftermarket Stereo with GPS Navigation Bluetooth Radio

Posted on by — 2 Comments ↓ 14,724 views
2009 2010 2011 2012-2013 SUBARU OUTBACK Car Radio after installation

Nowadays, more and more car owners who spend a lot of time in cars are trying to replace the factory radio with a new aftermarket car stereo for they want to create a more convenient, comfortable and relaxing car environment as well as a more wonderful driving experience. If you are one of them, you can try to install the new stereo under the guidance of a correct instruction. Today I’d like to share a 2009 2010 2011 2012-2013 SUBARU OUTBACK car radio installation instruction with you. If you have the same dashboard, you might refer to it when you are going to have the car radio replacement.

2009 2010 2011 2012-2013 SUBARU OUTBACK Car Radio after installation
2009 2010 2011 2012-2013 SUBARU OUTBACK Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009 2010 2011 2012-2013 SUBARU OUTBACK car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2-1
2-1
2-2
2-2

3. Remove six screws that fixed the radio on the dashboard.

Remove six screws that fixed the radio on the dashboard
Remove six screws that fixed the radio on the dashboard
3-1
3-1
3-2
3-2
3-3
3-3

4. Gently pull the factory radio out of the dash.

Gently pull the factory radio out of the dash
Gently pull the factory radio out of the dash

5. Then unplug the connectors at the back of the factory radio.

Then unplug the connectors at the back of the factory radio
Then unplug the connectors at the back of the factory radio

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Don’t be over worried if you encounter any problems during the installation. To solve these problems, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to select an ideal car radio. If you have no ideas, you can refer to the following link which is a remarkable 2009 2010 2011 2012-2013 SUBARU OUTBACK car radio from Seicane.

https://www.seicane.com/oem-2009-2013-subaru-outback-android-radio-dvd-player-gps-navigation-system-with-steering-wheel-control-bluetooth-wifi-backup-camera-obd2-dvr-dab-s32780g

This amazing car radio is upgraded to the most stable and latest Android 8.0 operation system and a strong 8-core Cortex A53 CPU processor to enhance its higher configuration and better performance.

Thanks to the built-in Bluetooth module, you can easily make this car radio sync with your Bluetooth-enabled mobile phone, so you can freely dial, receive, reject and mute Bluetooth hands-free phone calls as well as enjoy Bluetooth streaming music from phone play lists.

Additionally, under the guidance of the turn-by-turn direction and voice prompts provided by the 3DGPS navigation system of high accuracy, you are able to easily know your current locations and find the right way to reach your desired destinations. And this unit comes with dual zone function, which enables you to listen to your favorite music while navigating.

Wish you like this unit and good luck to you!

The Specific Instruction to Upgrade a 2009 2010 2011 2012-2015 Hyundai IX35 Car Radio Audio with Autoradio DVD Player Head Unit

Posted on by — 9 Comments ↓ 8,896 views
2009 2010 2011 2012-2015 Hyundai IX35 Car Radio after installation

If you think your factory radio is not featured enough, why not consider replacing it with a brand new multifunctional car radio? With an ideal car radio installed in you car, you can get access to a wide range of practical and entertainment features, which can bring you both great convenience and enjoyment. So don’t hesitate to replace your factory radio if you think it too outdated to satisfy most of your needs in car. The following is a 2009 2010 2011 2012-2015 Hyundai IX35 car radio installation instruction from Seicane, which can be taken as a reference for you.

2009 2010 2011 2012-2015 Hyundai IX35 Car Radio after installation
2009 2010 2011 2012-2015 Hyundai IX35 Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. So each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2009 2010 2011 2012-2015 Hyundai IX35 car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Use a plastic removal tool to remove the cover panel.

Use a plastic removal tool to remove the cover panel
Use a plastic removal tool to remove the cover panel

3. Unscrew two top screws fixed the radio on the dashboard.

Unscrew two top screws fixed the radio on the dashboard
Unscrew two top screws fixed the radio on the dashboard

4. Remove the air conditioning panel with a plastic removal tool and then disconnect the connectors at the back.

Remove the air conditioning panel with a plastic removal tool and then disconnect the connectors at the back
Remove the air conditioning panel with a plastic removal tool and then disconnect the connectors at the back
4-1
4-1
4-2
4-2

5. Remove another two screws that fixed the radio on the dashboard.

Remove another two screws that fixed the radio on the dashboard
Remove another two screws that fixed the radio on the dashboard

6. Take out the original radio.

Take out the original radio
Take out the original radio

7. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio
Disconnect the connectors and cables at the back of the radio

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original stereo’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place. All the installation is done.

 

That’s all about how to install a 2009 2010 2011 2012-2015 Hyundai IX35 car radio. If you have any doubts, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for hep. Or you can directly arrange a professional technician to help you install the new car radio. Anyway, before installation, please confirm that you’ve got an ideal car radio. If not, you can refer to the following link which is a remarkable 2009 2010 2011 2012-2015 Hyundai IX35 car radio from Seicane. For more details, please click:

https://www.seicane.com/android-2009-2015-hyundai-ix35-gps-navigation-system-with-hd-touchscreen-mirror-link-bluetooth-obd2-dvr-rearview-camera-1080p-steering-wheel-control-3g-wifi-s32735g

This car radio is running on the most advanced and stable Android 8.0 operation, a powerful 8-core CPU processor and 32GB ROM as well as 4GB RAM to provide you with smoother, faster and easier operation experience.

With this amazing car radio installed in your car, you can freely get access to a lot of practical and entertainment features, including 3D navigation, FM/AM radio, Bluetooth hands-free phone calls, Bluetooth streaming music, file management, SD card/USB connection, etc.

Under the guidance of the turn-by-turn directions and voice prompts provided by the GPS navigation system of high accuracy, you can easily locate where you are and navigate to any locations you would like to go to. And you can also listen to your favorite music while navigating thanks to this car radio’s dual zone function.

Moreover, without taking your hands off the steering wheel and your eyes off the road ahead, you can pair your Bluetooth-enabled mobile phone and this unit under the wireless Bluetooth technology so as to dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone music play lists.

What are you waiting for? If you like this unit, just add it to your shopping cart right now!

The Easy-to-understand Steps on Installing a 2008 2009 2010 2011-2013 VW Volkswagen GPS Bluetooth Car Radio with Steering Wheel Control WiFi

Posted on by — No Comments ↓ 2,947 views
2008 2009 2010 2011-2013 VW Volkswagen GPS Bluetooth Car Radio after installation

It goes without saying that an all-in-one car stereo can be regarded as the most significant part of a car since it comes with a wide range of practical and entertainment features, mainly including 3D GPS function, Bluetooth function, DVD player, FM/AM radio tuner, etc. If you are plan to replace your factory radio with a multifunctional car radio, you can go to a car radio upgrade center or ask a professional to install it in your car. Anyway, you can find an installation instruction to help you have a general understanding of the installation. The following is a 2008 2009 2010 2011-2013 VW Volkswagen car radio installation instruction from Seicane I would like to share with you.

2008 2009 2010 2011-2013 VW Volkswagen GPS Bluetooth Car Radio after installation
2008 2009 2010 2011-2013 VW Volkswagen GPS Bluetooth Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2008 2009 2010 2011-2013 VW Volkswagen car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. On the top of the air vent, you will see a top cover. Get underneath it and slide it out.

On the top of the air vent, you will see a top cover. Get underneath it and slide it out
On the top of the air vent, you will see a top cover. Get underneath it and slide it out
2-1
2-1

3. After you slide out the top cover, you will see two screws.

After you slide out the top cover, you will see two screws
After you slide out the top cover, you will see two screws

4. Unscrew these two screws with a screwdriver and remove the top piece.

Unscrew these two screws with a screwdriver and remove the top piece
Unscrew these two screws with a screwdriver and remove the top piece

5. Gently pull out the air vent and disconnect the connectors carefully. Please use a trim removal tool if necessary.

Gently pull out the air vent and disconnect the connectors carefully. Please use a trim removal tool if necessary
Gently pull out the air vent and disconnect the connectors carefully. Please use a trim removal tool if necessary
5-1
5-1

6. Use a screwdriver to remove the two screws on the top corner of the original car radio.

Use a screwdriver to remove the two screws on the top corner of the original car radio
Use a screwdriver to remove the two screws on the top corner of the original car radio

7. Pry the car radio frame by a flat removal tool and then remove the frame.

Pry the car radio frame by a flat removal tool and then remove the frame
Pry the car radio frame by a flat removal tool and then remove the frame
7-1
7-1
7-2
7-2

8. Unscrew the four screws that holds the original car radio.

Unscrew the four screws that holds the original car radio
Unscrew the four screws that holds the original car radio

9. Gently take out the original car radio out from the dashboard.

Gently take out the original car radio out from the dashboard
Gently take out the original car radio out from the dashboard

10. Disconnect all the connectors and cables at the back of the original car radio.

Disconnect all the connectors and cables at the back of the original car radio
Disconnect all the connectors and cables at the back of the original car radio

11. The original car radio is removed successfully.

The original car radio is removed successfully
The original car radio is removed successfully

12. Plug the power connector the original car’s socket. Make sure the lever thing is up first and then push it down.

Plug the power connector the original car’s socket. Make sure the lever thing is up first and then push it down
Plug the power connector the original car’s socket. Make sure the lever thing is up first and then push it down
12-1
12-1

13. Make sure that the rest of connectors and cables are connected successfully.

Make sure that the rest of connectors and cables are connected successfully
Make sure that the rest of connectors and cables are connected successfully
13-1
13-1

14. For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram.

For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram
For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram

15. Carefully place the new car radio.

Carefully place the new car radio
Carefully place the new car radio

16. Tighten the screws that hold the car radio with a screwdriver.

Tighten the screws that hold the car radio with a screwdriver
Tighten the screws that hold the car radio with a screwdriver

17. Put everything into their original place. All the installation is done.

Put everything into their original place. All the installation is done
Put everything into their original place. All the installation is done

18. The new Seicane car radio after installation.

The new Seicane car radio after installation
The new Seicane car radio after installation

 

Above is the whole removal and installation process of a 2008 2009 2010 2011-2013 VW Volkswagen car radio. If you meet any difficulties and don’t know how to overcomes them, you can browse some professional websites for seek advice, contact your dealer or seek help from a professional. Or you can directly go to a car radio upgrade center and ask a professional technician to help you install the new car radio.

Besides, it is very necessary for you to select an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is an excellent 2008 2009 2010 2011-2013 VW Volkswagen car radio from Seicane. For more details, please click:

https://www.seicane.com/android-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-skoda-seat-with-3g-wifi-mirror-link-obd2-bluetooth


This powerful car radio, which is loaded with the pure stable Android 8.0  operation system, 8 – Core 1.5 GHz RK-PX5 A53 processor and 32GB Inland flash as well as 4GB RAM, can be one of your best choices to replace your factory radio in your beloved car.

Under the guidance of the turn-by-turn directions and voice prompts offered by the advanced  3D GPS navigation system of high accuracy, this unit enables you to easily locate where you are currently and help you gain the most route options to arrive at your desired destinations. Additionally, another amazing feature is that this unit comes with dual zone function, so you can also listen to your favorite music while navigating and the music will automatically switch to GPS voice.

What’s more, without keeping your hands off the steering wheel, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you as long as you make your Bluetooth-enabled mobile phone pair with this smart car radio. And by doing so, you can obtain great convenience and enjoyment.

What are you waiting for? If you like this unit, just add it to your shopping cart right now!

How to Skillfully Install a Car Stereo Radio Navigation Unit for 2005 2006 2007 2008-2011 Seat Leon with Steering Wheel Control WiFi

Posted on by — 2 Comments ↓ 10,646 views
2005 2006 2007 2008-2011 Seat Leon Car Radio after installation

Have you ever thought that if you have a very remarkable car radio installed in your car, your new driving life will be totally different from before? An ideal car radio with both practical and entertainment features can greatly bring great convenience and entertainment for its user. If you think your car radio’s functions are too limited, you might as well consider replacing your factory radio with a brand new car radio. This article mainly aims to introduce the installation steps of a 2005 2006 2007 2008-2011 Seat Leon car radio from Seicane. If you own the same vehicle type, you can refer to these steps carefully.

2005 2006 2007 2008-2011 Seat Leon Car Radio after installation
2005 2006 2007 2008-2011 Seat Leon Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2005 2006 2007 2008-2011 Seat Leon car radio installation steps

1. The original car radio.

The original car radio
The original car radio

2. Insert the removal keys to the original car radio so as to release the original car radio.

Insert the removal keys to the original car radio so as to release the original car radio
Insert the removal keys to the original car radio so as to release the original car radio

3. Gently pull out the original factory radio from the original dashboard.

Gently pull out the original factory radio from the original dashboard
Gently pull out the original factory radio from the original dashboard
3-1
3-1

4. Unplug the connectors and cables at the back of the original car radio.

Unplug the connectors and cables at the back of the original car radio
Unplug the connectors and cables at the back of the original car radio

5. The original factory car radio is removed successfully.

The original factory car radio is removed successfully
The original factory car radio is removed successfully
5-1
5-1

6. Make the original car’s connector plug to the new car radio’s power connector.

Make the original car's connector plug to the new car radio's power connector
Make the original car’s connector plug to the new car radio’s power connector

7. Make the white connector plug to the CAN BUS decoder.

Make the white connector plug to the CAN BUS decoder
Make the white connector plug to the CAN BUS decoder

8. Make sure the rest of connectors and cables are plugged to the radio’s right interfaces.

Make sure the rest of connectors and cables are plugged to the radio's right interfaces
Make sure the rest of connectors and cables are plugged to the radio’s right interfaces

9. For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram.

For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram
For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram

10. Use a screwdriver to fix the four screws which hold the car radio.

Use a screwdriver to fix the four screws which hold the car radio
Use a screwdriver to fix the four screws which hold the car radio
10-1
10-1

11. Place the car radio frame at the original position firmly.

Place the car radio frame at the original position firmly
Place the car radio frame at the original position firmly

12. Seicane car radio after installation.

Seicane car radio after installation
Seicane car radio after installation

 

 

So now do you have a general understanding of the whole removal and installation steps of a  2005 2006 2007 2008-2011 Seat Leon car radio? If you still feel it hard to install such a car radio by yourself, it is sincerely suggested that you should seek help from your dealer, someone experienced or a professional. Or you can straightly go to a car radio upgrade center and make the new car radio installed by a professional technician. Additionally, if you are still searching online for a suitable car radio and feel interested in the car radio we’ve mentioned, you can check out the following related link for more details.

https://www.seicane.com/android-2005-2011-seat-leon-gps-dvd-player-in-dash-radio-system-with-hd-touch-screen-bluetooth-3g-wifi-mirror-link-obd2-dvr-backup-camera-s6920


This car radio is running on the advanced and stable Android 7.1 operations system and powerful quad-core RK PX3 CPU, and it also has 2GB RAM to enhance its capability and performance.

With this car radio installed in your car, you can easily get access to a lot of practical and entertainment features, such as 3D GPS function, FM/AM radio tuner, Bluetooth hands-free phone calls, Bluetooth streaming music, file management, USB connection,etc.

About the 3D GPS navigation function, what you cannot ignore is that with its assistance, you will know your current position easily and quickly, and will be guide to the correct destinations by turn-by-turn direction and voice prompts.

You don’t have to worry about that your car’s original camera can not work after install this unit since it can totally support it. Besides, this unit can both support 3G and 4G Net, which enables you to freely surf on the internet in your beloved car. And one of the highlight is that this unit also support carplay, so you can freely enjoy your smartphone carplay function in your car if you get it installed and has a carplay USB dongle in your car.

If you like this unit, then don’t hesitate to take it home. You will get more surprise.

How to Remove a 2013 2014 2015 Suzuki S-Cross SX4 Car Radio to Install a Touch Screen Radio Stereo Navigation System

Posted on by — 2 Comments ↓ 3,767 views
2013 2014 2015 Suzuki S-Cross SX4 Car Radio after installation

In order to gain a wonderful and relaxing driving experience, you can consider removing your factory radio and install a new aftermarket car radio. And to reduce some budgets, you can find a related instruction and follow it to try to remove the factory radio and install the new car radio by yourself. The following is a 2013 2014 2015 Suzuki S-Cross SX4 car radio installation guide. If you have the same or similar dashboard, you can refer to the following guide and take it as a reference.

2013 2014 2015 Suzuki S-Cross SX4 Car Radio after installation
2013 2014 2015 Suzuki S-Cross SX4 Car Radio after installation

Here are some tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and www.seicane.com make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

 

2013 2014 2015 Suzuki S-Cross SX4 car radio installation guide

1. Pry the indicator light with a plastic knife and disconnect the connector at the back of it.

Pry the indicator light with a plastic knife and disconnect the connector at the back of itPry the indicator light with a plastic knife and disconnect the connector at the back of it
Pry the indicator light with a plastic knife and disconnect the connector at the back of it
1-1
1-1

2. Remove the air vent with a plastic removal tool.

Remove the air vent with a plastic removal tool
Remove the air vent with a plastic removal tool

3. Remove two top screws that are holding the radio.

Remove two top screws that are holding the radio
Remove two top screws that are holding the radio

4. Gently take out the original radio.

Gently take out the original radio
Gently take out the original radio

5. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio
Disconnect the connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Now do you have a general understanding of the whole installation process on a 2013 2014 2015 Suzuki S-Cross SX4 car radio? If not, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. Anyway, before installation, please do select an ideal car radio. If you have no ideas, you can refer to the following link which is a remarkable 2013 2014 2015 Suzuki S-Cross SX4 car radio from Seicane.

https://www.seicane.com/inch-2013-2014-2015-suzuki-sx4-cross-android-radio-dvd-gps-navigation-system-with-hd-touch-screen-bluetooth-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-steering-wheel-control-mirror-link-s32536

This car radio is loaded with the most advanced and stable Android 8.0 operation system and a powerful 8-core CPU processor as well as 4GB RAM. Besides, it comes with a wide range of practical and entertainment features to meet your different needs in your car.

After you get this car radio installed in your car, you can make full use of this unit’s built-in GPS navigation system of high accuracy. You can easily locate where you are and navigate to any locations you would like to go to through the turn-by-turn directions and voice prompts.

Besides, as long as you connect your Bluetooth-enabled mobile phone to this unit through Bluetooth connection, you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your mobile phone without taking your hands off the steering wheel.

If you like this unit, just add it to your shopping cart. Good luck!

How to Install a 2003 2004 2005 2006-2010 Porsche Cayenne Car Stereo Audio with Bluetooth GPS Navigation System

Posted on by — 7 Comments ↓ 9,011 views
2003 2004 2005 2006-2010 Porsche Cayenne Car Stereo after installation

It goes without saying that a remarkable car radio can help you gain a much relaxing driving experience. Therefore, more and more car owners would like to replace their factory radio with a new aftermarket car radio so as to get access to a lot of upgraded and brand new features. This article mainly talks about the installation instruction on a 2003 2004 2005 2006-2010 Porsche Cayenne car radio. If you also have the same or similar dashboard, you can refer to the following instruction.

2003 2004 2005 2006-2010 Porsche Cayenne Car Stereo after installation
2003 2004 2005 2006-2010 Porsche Cayenne Car Stereo after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2003 2004 2005 2006-2010 Porsche Cayenne car radio installation instruction

1. Pry out the trim piece along the perimeter of the center dashboard with a lever.

Pry out the trim piece along the perimeter of the center dashboard with a lever
Pry out the trim piece along the perimeter of the center dashboard with a lever

2. Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation.

Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation
Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation

3. Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily.

Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily
Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily

4. Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray.

Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray
Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray

5. Press the tab (green arrow) on the antenna lead and pull it out of the stereo.

Press the tab (green arrow) on the antenna lead and pull it out of the stereo
Press the tab (green arrow) on the antenna lead and pull it out of the stereo

6. Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle’s different years.

Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle's different years
Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle’s different years

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio’s plugs. And put the new Seicane car radio back into the dash.

10. Install two screws and trim piece.

11. Turn on the new car radio and have a comprehensive test.

 

Wish the above installation instruction can do you some help. If you have any doubts, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or for avoiding damage to either your car radio or your car, you’d better go to a car radio upgrade center to ask a professional technician to help you install the new car radio.

Anyway, before installation, please make sure you’ve had an ideal car radio. If not, I’d like to recommend an excellent 2003 2004 2005 2006-2010 Porsche Cayenne car radio from Seicane to you. For more details, please click:

https://www.seicane.com/android-2003-2004-2005-2006-2010-porsche-cayenne-gps-navigation-cd-radio-dvd-player-bluetooth-wifi-usb-audio-system-support-dvr-obd2-backup-camera-digital-tv-s6935g

Loaded with the latest and most stable Android 8.0 operation system and a powerful 8-core 1.5 GHz Cortex A53 CPU processor, this car radio can be regarded as one of the best replacement for your factory radio because of its enhance and improved capabilities and performance.

With the guidance of the built-in GPS navigation system of this car radio, you can easily locate where you are and find the right way to reach your desired destinations through turn-by-turn directions and voice prompts. Besides, while navigating, you can also freely listen to your favorite music thanks to this unit’s dual zone function.

Besides, through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can freely dial, answer, reject and mute hands-free calls as well as listen to your favorite music streaming from your phone music playlists, which can add both convenience and enjoyment to your in-car life.

Wish you like this unit and good luck to you!

How to Install a 2012 CITROEN C4 Car Stereo With Radio GPS Navigation Function in an Effective Way

Posted on by — No Comments ↓ 3,184 views
2012 CITROEN C4 car stereo after installation

Would you like to learn to remove your factory radio and install a new car radio on your own? If your answer toward this question is “yes”, then you can find a detailed installation instruction to guide you. This article is mainly about introducing how to install a 2012 CITROEN C4 car stereo with radio, GPS function and other useful features. If you own the same vehicle type, you might as well refer to this instruction carefully. Wish it is helpful for you.

2012 CITROEN C4 car stereo after installation
2012 CITROEN C4 car stereo after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2012 CITROEN C4 car stereo installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Use a plastic knife to pry the trim panel and remove it.

Use a plastic knife to pry the trim panel and remove it
Use a plastic knife to pry the trim panel and remove it
2-1
2-1
2-2
2-2

3. Remove screws that are holding the radio.

Remove screws that are holding the radio
Remove screws that are holding the radio

4. Take out the original car radio.

Take out the original car radio
Take out the original car radio

5. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio
Disconnect the connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original stereo’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

If you have any doubts, please don’t hesitate to consult your dealer, communicate with someone experienced or turn to a professional for help. Besides, before installation, it is essential for you to carefully pick an ideal car radio. Here I would like to recommend a remarkable 2012 CITROEN C4 car stereo from Seicane with you. For more details, please click:

https://www.seicane.com/hd-touchscreen-radio-android-head-unit-for-2012-citroen-c4-car-stereo-gps-navigation-system-bluetooth-phone-wifi-support-mirror-link-obdii-dvr-steering-wheel-control-usb-s086990f

This powerful car stereo is running on the newest Android 6.0 operation system, high-quality 8-core CPU and 2GB RAM.

Even though you are not good at identifying directions, the high-accuracy 3D GPS navigation system is specially built in to offer you some help. With the help of the worldwide real-time navigation, you can get access to features like current location, 3D street view, landmark building display, turn-by-turn voice directions, etc. So you can be accurately guided to arrive at your desired destinations.

Besides, under the wireless Bluetooth technology, without taking your hands off the steering wheel, hands-free calls and streaming music are both available as long as you pair your Bluetooth-enabled mobile phone with this unit.

If you like this unit, just add it to your shopping cart right now. Good luck!

The Advanced Instruction on a 2014 2015 2016 2017 Jeep Grand Cherokee Car Radio Removal and Installation

Posted on by — No Comments ↓ 2,569 views

There is no denying that with an ideal car radio installed in your car, you can get access to a wide range of practical and entertainment features. So if you are fed up with your factory radio, you can replace it with a new aftermarket car radio. And with a related installation guide, you can also try to remove the factory radio and install the new car radio. The following is a 2014 2015 2016 2017 Jeep Grand Cherokee car radio installation guide from Seicane. Wish you can get some help from it.

2014 2015 2016 2017 Jeep Grand Cherokee Car Radio after installation
2014 2015 2016 2017 Jeep Grand Cherokee Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriverbefore the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2014 2015 2016 2017 Jeep Grand Cherokee car radio installation guide

1. Prepare a plastic removal tool. Remove the AC control panel.

Prepare a plastic removal tool. Remove the AC control panel
Prepare a plastic removal tool. Remove the AC control panel
1-1
1-1

2. Remove two screws below.

Remove two screws below
Remove two screws below
2-1
2-1

3. Remove the radio trim panel with a plastic removal tool.

Remove the radio trim panel with a plastic removal tool
Remove the radio trim panel with a plastic removal tool
3-1
3-1

4. Unscrew four screws that are holding the radio on the dashboard.

Unscrew four screws that are holding the radio on the dashboard
Unscrew four screws that are holding the radio on the dashboard

5. Gently remove the original radio.

Gently remove the original radio
Gently remove the original radio

6. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio
Disconnect the connectors and cables at the back of the radio

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original stereo’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Wish the above removal and installation steps can be helpful for you. If you have any questions, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. Besides, to help you select an ideal car radio, here I would like to share an amazing 2014 2015 2016 2017 Jeep Grand Cherokee car radio from Seicane with you.

https://www.seicane.com/hd-touch-screen-2014-2015-2016-2017-jeep-cherokee-android-radio-gps-navigation-bluetooth-music-usb-wifi-audio-system-support-dvr-obd2-tpms-digital-tv-backup-camera-1080p-video-auto-a-v-s18jp62

This great 2014 2015 2016 2017 Jeep Grand Cherokee car radio, equipped with the worldwide real-time 3D GPS navigation system, enables you to locate where you are and navigate to your desired destinations through turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to freely listen to your favorite music while navigating. Besides, you can also make full advantage of this unit’s built-in Bluetooth module to get access to hands-free calls and Bluetooth music streaming from your Bluetooth-enabled mobile phone and this unit.

Don’t hesitate to purchase this unit and wish you enjoy your driving accompanied by it!

How to Remove and Install a 2008 2009 2010 2011 2012-2016 TOYOTA Venza GPS Navi DVD Car Stereo with Bluetooth Audio Navigation

Posted on by — No Comments ↓ 3,283 views
2008 2009 2010 2011 2012-2016 TOYOTA Venza GPS Navi after installation

If you plan to build a more comfortable and convenient in-car environment as well as embrace a brand new driving experience, it will be a great choice of you to replace your factory radio with a new aftermarket car radio. To help you successfully finish the whole removal and installation process, here I’d like to share a 2008 2009 2010 2011 2012-2016 TOYOTA Venza car radio installation instruction from Seicane with you. If you have the same or similar dashboard, you can refer to this instruction to help with your installation.

2008 2009 2010 2011 2012-2016 TOYOTA Venza GPS Navi after installation
2008 2009 2010 2011 2012-2016 TOYOTA Venza GPS Navi after installation

Here are some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriverbefore the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2008 2009 2010 2011 2012-2016 TOYOTA Venza car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Use a plastic removal tool to remove the paneland disconnect the connector at the back of it.

Use a plastic removal tool to remove the paneland disconnect the connector at the back of it
Use a plastic removal tool to remove the paneland disconnect the connector at the back of it
2-1
2-1

3. Remove Phillip screws which fix the AC control.

Remove Phillip screws which fix the AC control
Remove Phillip screws which fix the AC control

4. Take out the AC controland unplug the connector at the back.

Take out the AC controland unplug the connector at the back
Take out the AC controland unplug the connector at the back

5. Use a screwdriver and flexibility jointto remove mounting screws.

6. Gently take out the original car radio.

Gently take out the original car radio
Gently take out the original car radio

7. Disconnect the connectors and cables at the back of the radio.

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original radio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place.

 

Wish you get some inspiration from the above steps. If you have any questions, you might as well consult your dealer for valuable advice or seek help from a professional. Or if you are afraid of making damage to either your car radio or your car, you can directly go to a car radio upgrade center to have the new car radio installed by a professional technician.

Besides, as for the selection of an ideal car radio, if you don’t have any ideas, I’d like to recommend a remarkable 2008 2009 2010 2011 2012-2016 TOYOTA Venza car radio from Seicane to you.

https://www.seicane.com/cheap-2008-2016-toyota-venza-head-unit-with-radio-bluetooth-gps-navigation-system-touch-screen-cd-dvd-player-3g-wifi-mirror-link-obd2-aux-dvr-steering-wheel-control-backup-camera-s18t027

After get this car radio installed in your car, your car interior environment can be greatly improved and you can embrace a brand new driving experience.

Even you are traveling around a totally unfamiliar place, you won’t get lost any more since this unit come with the high-accuracy GPS navigation function. With its help, you can easily know your current locations and find the right way to reach your desired destinations through text-to-speech guidance. And while navigating, you can freely listen to your favorite music thanks to this unit’s dual zone function, and the music will automatically switch to GPS voice.

Wish you like this unit and good luck to you!

How to Effectively Upgrade a 2006 2007 2008 2009 2010-2012 MITSUBIHI OUTLANDER Car Radio with Bluetooth GPS Navigation System

Posted on by — No Comments ↓ 3,290 views
2006 2007 2008 2009 2010-2012 MITSUBIHI OUTLANDER Car Radio after installation

As you know, at present, there are more and more options for you to enhance your car’s capabilities. And one of the most popular measures you can take is to replace your factory radio with a new multifunctional car radio. With an ideal car radio, you can not only gain a lot of convenience but also enjoy more entertainment features. This article mainly introduce a 2006 2007 2008 2009 2010-2012 MITSUBIHI OUTLANDER car radio installation instruction from Seicane. If you have the same or similar dashboard and plan to upgrade your factory radio, you can refer to this instruction to deal with the installation.

2006 2007 2008 2009 2010-2012 MITSUBIHI OUTLANDER Car Radio after installation
2006 2007 2008 2009 2010-2012 MITSUBIHI OUTLANDER Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriverbefore the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2006 2007 2008 2009 2010-2012 MITSUBIHI OUTLANDER car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

 2. Open the glove box so as to get access to the trim. Then use a plastic removal tool to remove the two trim panels.

Open the glove box so as to get access to the trim. Then use a plastic removal tool to remove the two trim panels
Open the glove box so as to get access to the trim. Then use a plastic removal tool to remove the two trim panels
2-1
2-1
2-2
2-2

3. Use a screwdriver to remove the screws that fix the car radio panel.

Use a screwdriver to remove the screws that fix the car radio panel
Use a screwdriver to remove the screws that fix the car radio panel

4. Try to remove the car radio panel.

Try to remove the car radio panel
Try to remove the car radio panel

5. Remove four screws that are holding the factory radio.

Remove four screws that are holding the factory radio
Remove four screws that are holding the factory radio

6. Gently take the original car radio out from the dashboard and disconnect the connectors or cables at the back of it.

Gently take the original car radio out from the dashboard and disconnect the connectors or cables at the back of it
Gently take the original car radio out from the dashboard and disconnect the connectors or cables at the back of it

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Wish the above installation guide can be helpful for you to some extent. If you have any doubts, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly ask a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to select an ideal car radio for your beloved car radio. If you have no ideas, you can refer to an excellent 2006 2007 2008 2009 2010-2012 MITSUBIHI OUTLANDER car radio that I would like to recommend to you.

https://www.seicane.com/android-hd-touchscreen-car-radio-dvd-player-for-2006-2012-mitsubihi-outlander-gps-navigation-system-bluetooth-phone-wifi-support-obd2-usb-mirror-link-steering-wheel-control-backup-camera-1080p-video-s23848e

This car radio is running on the advanced and stable Android 6.0 operation system and a powerful quad-core CPU processor to enhance its performance so as to provide its users with better service.

Even you are driving around an unfamiliar place, you won’t get lost any longer as long as you turn on GPS function and make full use of it. With its powerful GPS function, you can easily locate where you are and find a right way to reach your destinations through turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Besides, thanks to the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you, therefore, you can gain a lot of convenience and enjoyment.

If you like this car radio, just add it to your shopping cart. Good luck!