Home › View all posts by john › Page 18

Author: john

The Quick Tutorial on a 2011 2012 KIA K2 RIO Car Radio Installation with Bluetooth GPS Navigation System

Posted on by — No Comments ↓ 2,620 views
2011 2012 KIA K2 RIO Car Radio after installation

To enrich your in-car life or take your in-car life up a level, you can easily replace your factory radio with a new aftermarket car radio. There is no doubt that an ideal car radio can make you enjoy more convenience and enjoyment. If you have some related installation, you can follow the related installation guide to deal with the installation. The following is a 2011 2012 KIA K2 RIO car radio installation instruction which can be taken as your reference.

2011 2012 KIA K2 RIO Car Radio after installation
2011 2012 KIA K2 RIO Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2011 2012 KIA K2 RIO car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Use a plastic removal tool to release the top panel.

Use a plastic removal tool to release the top panel
Use a plastic removal tool to release the top panel

3. Pry the trim panel of the radio with a plastic knife and remove it.

Pry the trim panel of the radio with a plastic knife and remove it
Pry the trim panel of the radio with a plastic knife and remove it
3-1
3-1

4. Unscrew the screws that are holding the radio on the dashboard.

Unscrew the screws that are holding the radio on the dashboard
Unscrew the screws that are holding the radio on the dashboard

5. Take out the radio gently.

Take out the radio gently
Take out the radio gently

6. Unplug the connectors and cables at the back of the radio.

Unplug the connectors and cables at the back of the radio
Unplug the connectors and cables at the back of the radio

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Wish you can learn something useful from the above installation instruction. If you meet any difficulties you don’t know how to overcome, you might as well seek help from your dealer, someone experienced or a professional. Or you can directly arrange a professional technician to help you install the new car radio. Additionally, to help you select a suitable car radio, here I would like to share a marvelous 2011 2012 KIA K2 RIO car radio from Seicane with you. Here comes the related link, please click:

https://www.seicane.com/android-touchscreen-2011-2012-kia-k2-rio-radio-gps-navigation-system-with-dvr-bluetooth-steering-wheel-control-backup-camera-mirror-link-obd2-digital-tv-s18k212

This remarkable car radio with a large 9 inch screen is loaded with the intelligent Android 7.1 operation system, a quad-core 1.6 GHz RK-PX3 CPU processor and 2GB RAM to enable you to enjoy its higher capabilities and performance.

Under the guidance of the turn-by-turn directions and voice prompts offered by the built-in precise GPS navigation system, it will become much easier for you to know your current locations and navigate to any locations you would like to go to. And this unit’s dual zone function enables you to listen to your favorite music while navigating, which won’t have any negative influence on GPS function.

Through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, without taking your hands off the steering wheel, you are able to dial, answer, reject and mute hands-free calls as well as listen to beautiful music streaming from your phone. By doing so, you will gain a lot of convenience and enjoyment.

Wish you enjoy your relaxing trip accompanied by this car radio. Good luck!

Skills to Replace a 2012 2013 Toyota CAMRY GPS DVD Bluetooth Car Radio

Posted on by — No Comments ↓ 2,926 views
2012 2013 Toyota CAMRY GPS DVD Bluetooth Car Radio after installation

As the technology greatly improves, nowadays a car radio is usually compatible with more and more modern features. If you think your factory radio is out of date, it is suggested that you replace it with a new aftermarket car radio. This article is mainly about how to remove the factory radio and install the new car radio for 2012 2013 Toyota CAMRY. If you happen to own the same or similar dashboard, you can refer to it to deal with the installation.

2012 2013 Toyota CAMRY GPS DVD Bluetooth Car Radio after installation
2012 2013 Toyota CAMRY GPS DVD Bluetooth Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts (Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2012 2013 Toyota CAMRY car radio installation instruction

1. Remove the lower dashboard trim panels and the upper air conditioning vents.

Remove the lower dashboard trim panels and the upper air conditioning vents
Remove the lower dashboard trim panels and the upper air conditioning vents
1-1
1-1
1-2
1-2

2. Gently pry the upper dashboard housing from the radio’s trim bazel using either an automotive trim tool or your hands.

Gently pry the upper dashboard housing from the radio's trim bazel using either an automotive trim tool or your hands
Gently pry the upper dashboard housing from the radio’s trim bazel using either an automotive trim tool or your hands

3. After the upper dashboard housing has been disconnected, remove the two upper &two lower radio mounting screws from the dashboard.

After the upper dashboard housing has been disconnected, remove the two upper &two lower radio mounting screws from the dashboard
After the upper dashboard housing has been disconnected, remove the two upper &two lower radio mounting screws from the dashboard
3-1
3-1
3-2
3-2
3-3
3-3

4. Once the four radio mounting screws have been removed, gently lift the radio from the dashboard in order to gain access to the factory wiring harnesses on the backside.

Once the four radio mounting screws have been removed, gently lift the radio from the dashboard in order to gain access to the factory wiring harnesses on the backside
Once the four radio mounting screws have been removed, gently lift the radio from the dashboard in order to gain access to the factory wiring harnesses on the backside
4-1
4-1

5. Disconnect the connectors at the back of the radio.

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Before installation, please confirm that you understand every detailed step. If you have any doubts, please don’t hesitate to seek help from your dealer, someone experienced or a professional. Or you can directly arrange a professional to help you install the new car radio. Anyway, first of all, it is essential for you to select an ideal car radio, here I would like to recommend an amazing 2012 2013 Toyota CAMRY car radio from Seicane to you.

https://www.seicane.com/full-touchscreen-2012-2013-toyota-camry-android-gps-navigation-system-with-radio-rearview-camera-4g-wifi-bluetooth-mirror-link-obd2-dvr-steering-wheel-control-s18t252

This car radio comes with a super large 10.2 inch HD 1024 x 600 multi-touch screen. Based on the most advanced Android 7.1 operation system and a high-quality quad-core 1.6GHz RK PX3 processor, this car radio can greatly facilitate the operation so as to provide its users with a brand new and wonderful operation experience.

Under the guidance of the turn-by-turn directions and voice prompts offered by the worldwide real-time GPS navigation system of high accuracy, you can easily know your current locations and have the optimal route option to reach your desired destinations. And you can also listen to radio, USB or SD card music playback while navigating thanks to this unit’s dual zone function.

Wish you like this unit and good luck to you!

How to Upgrade a 2011 2012 2013 Kia k5 Car Stereo with Radio CD Player in a Fast Way

Posted on by — No Comments ↓ 2,786 views
2011 2012 2013 Kia k5 Car Stereo after installation

If you are a car owner of a 2011 2012 2013 Kia k5, then you can have a look at the following image, which is a 2011 2012 2013 Kia k5 car radio from Seicane after installation. It looks very amazing, isn’t it? If you are fed up with your factory radio and also want to replace your factory radio, you can carefully refer to the following 2011 2012 2013 Kia k5 car radio installation guide.

2011 2012 2013 Kia k5 Car Stereo after installation
2011 2012 2013 Kia k5 Car Stereo after installation

Please pay attention to the following notice before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

2011 2012 2013 Kia k5 car radio installation guide

1. There is a panel shown in the picture, use a plastic knife to pry it.

There is a panel shown in the picture, use a plastic knife to pry it
There is a panel shown in the picture, use a plastic knife to pry it
1-1
1-1

2. Remove four screws that fixed the panel near the AC control.

Remove four screws that fixed the panel near the AC control
Remove four screws that fixed the panel near the AC control
2-1
2-1
2-2
2-2

3. Use the plastic removal tool to remove the decorated panel around the radio.

Use the plastic removal tool to remove the decorated panel around the radio
Use the plastic removal tool to remove the decorated panel around the radio
3-1
3-1

4. Remove screws that fixed the AC control so as to remove the AC control.

Remove screws that fixed the AC control so as to remove the AC control
Remove screws that fixed the AC control so as to remove the AC control
4-1
4-1

5. Unscrew screws to release the panel on the left side of the radio and the radio trim panel.

Unscrew screws to release the panel on the left side of the radio and the radio trim panel
Unscrew screws to release the panel on the left side of the radio and the radio trim panel
5-1
5-1
5-2
5-2
5-3
5-3

6. Remove four screws that are holding the radio on the dashboard.

7. Gently take out the original car radio.

8. Disconnect the connectors and cables at the back of the radio.

9. Check all the accessories for the new Seicane car radio.

10. Connect the harnesses to the back of the new Seicane car radio.

11. Connect the Seicane car radio to your original radio’s plugs.

12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane car radio into the dash.

14. Put everything into their original place. All the installation is done.

 

Before installation, please make clear every detailed step. If you encounter any difficulties you cannot overcome independently, please feel free to seek help from your dealer, someone experienced or a professional. Or you can directly ask a professional technician to help you install the new car radio. Anyway, before installation, you should pick an ideal car radio. If you don’t have any ideas, you can refer to the link below which is an amazing 2011 2012 2013 Kia k5 car radio from Seicane.

https://www.seicane.com/2011-2012-2013-kia-k5-android-radio-gps-navigation-system-with-hd-touchscreen-bluetooth-steering-wheel-control-digital-tv-mirror-link-backup-camera-tpms-s18k215

This car radio runs much smoother and faster since it is running on the most advanced and stable Android 7.1 operation system ,a 1.6GHz RK PX3 quad-core processor and 2 GB RAM.

With the assistance of the worldwide real-time GPS navigation system, you will be accurately provide with your current locations and the optimal routes and led to any locations you would like to go to according to turn-by-turn direction and voice prompts. Thanks to this unit’s dual zone function, you will be able to listen to your favorite music while navigating.

Besides, with a built-in digital FM/AM radio tuner, this car A/V system features searching radio channels automatically, manually and storing them in the process.

What are you waiting for? If you like this unit, just add it to your shopping cart right now!

Easy Steps to Replace a 2012 CITROEN C4 Bluetooth GPS DVD Touch Screen Car Radio

Posted on by — No Comments ↓ 4,503 views
2012 CITROEN C4 Bluetooth GPS DVD Touch Screen Car Radio after installation

To embrace a more comfortable in-car environment and driving experience, one of the straightforward ways is to replace your factory radio with a new aftermarket car radio. And to reduce some budget on the replacement of the car radio, you can try to install the new car radio on your own. We write this article to mainly introduce a 2012 CITROEN C4 car radio installation guide from Seicane. If you have the same or similar dashboard, you can take this guide as a reference.

2012 CITROEN C4 Bluetooth GPS DVD Touch Screen Car Radio after installation
2012 CITROEN C4 Bluetooth GPS DVD Touch Screen Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2012 CITROEN C4 car radio installation guide

1. The original car radio.

The original car radio
The original car radio

2. Use a plastic knife to pry the trim panel and remove it.

Use a plastic knife to pry the trim panel and remove it
Use a plastic knife to pry the trim panel and remove it
2-1
2-1
2-2
2-2

3. Remove screws that are holding the radio.

Remove screws that are holding the radio
Remove screws that are holding the radio

4. Take out the original car radio.

Take out the original car radio
Take out the original car radio

5. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio
Disconnect the connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original stereo’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Above are all steps about the installation of a 2012 CITROEN C4 car radio. Wish you can learn some skills from them. To overcome some difficulties you meet in the removal and installation process, you can browse some professional websites or seek help from your dealer, someone experienced or a professional. But if you haven’t selected an ideal car radio yet, you may check out the following link which is a wonderful 2012 CITROEN C4 car radio from Seicane.

https://www.seicane.com/2012-citroen-c4-dvd-player-radio-android-navigation-system-mirror-link-gps-hd-touch-screen-obd2-dvr-tv-1080p-video-3g-wifi-steering-wheel-control-bluetooth-usb-sd-backup-camera-s168064

This great 2012 CITROEN C4 car radio can be regarded as your perfect road companion since it comes with higher configuration and better performance.

This unit’s built-in worldwide real-time GPS navigation system allows you to easily know your current locations and have the optimal route options to arrive at any locations you would like to go to according to turn-by-turn directions and voice prompts.

Thanks to this unit’s additional entertainment features, you can utilize its function as a multimedia player to play music, videos, TV programs, movies, etc, which may relax both yourself and your passengers.

Wish you like this unit and good luck to you!

The Most Effective Way to Upgrade a 2009 2010 2011 2012 2013 Subaru outback GPS Car Radio with Bluetooth Speakers Navigation DVD Player

Posted on by — 4 Comments ↓ 9,189 views
2009 2010 2011 2012 2013 Subaru outback GPS Car Radio after installation

First of all, please look at the following image. It is a 2009 2010 2011 2012 2013 Subaru outback car radio from Seicane after installation. It looks very awesome, isn’t it? If you have the same or similar dashboard and would like to upgrade your factory radio, you can refer to the following installation guide to help with the new car radio installation.

2009 2010 2011 2012 2013 Subaru outback GPS Car Radio after installation
2009 2010 2011 2012 2013 Subaru outback GPS Car Radio after installation

Here are some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriverbefore the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009 2010 2011 2012 2013 Subaru outback car radio installation guide

1. The original car radio.

The original car radio
The original car radio

2. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2-1
2-1
2-2
2-2

3. Remove six screws that fixed the radio on the dashboard.

Remove six screws that fixed the radio on the dashboard
Remove six screws that fixed the radio on the dashboard
3-1
3-1
3-2
3-2
3-3
3-3

4. Gently pull the factory radio out of the dash.

Gently pull the factory radio out of the dash
Gently pull the factory radio out of the dash

5. Then unplug the connectors at the back of the factory radio.

Then unplug the connectors at the back of the factory radio
Then unplug the connectors at the back of the factory radio

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

That’s the whole removal and installation process for a 2009 2010 2011 2012 2013 Subaru outback car radio. If you cannot fully understand, please feel free to seek help from your dealer,, someone experienced or a professional. Besides, if you still think it hard for you to finish the whole installation process, you can directly arrange a professional to help you install the new car radio.

To help you select an ideal car radio, I would like to recommend a fabulous 2009 2010 2011 2012 2013 Subaru outback car radio from Seicane to you. Here comes the link, please click:

https://www.seicane.com/2009-2013-subaru-outback-android-radio-gps-navigation-system-with-bluetooth-dvd-player-with-hd-touch-screen-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-steering-wheel-control-usb-sd-mirror-link-s167069

Even you are driving around an unfamiliar city, you can depend on the built-in 3D GPS navigation system. With its help, you can plan the most suitable route to get to your destinations without mistakes through text-to-speech guidance. And this unit’s dual zone function makes it possible for you to enjoy your favorite music while navigating.

Besides, to guarantee your driving safety, the Bluetooth module is built in to make it possible for you to dial, receive or reject hands-free phone calls as well as enjoy streaming music from your phone music playlists without keeping your hands off the steering wheel.

What are you waiting for? Just add this unit to your shopping cart right now!

How to Upgrade a 2015 2016 Mercedes-Benz SMART GPS Bluetooth Car Radio Easily

Posted on by — No Comments ↓ 3,178 views
2015 2016 Mercedes-Benz SMART GPS Bluetooth Car Radio after installation

If your are desired of a brand new driving experience, you can think about replacing your factory radio with a new aftermarket car radio. And you can also try to remove the factory radio and install the new car radio by yourself since the car radio upgrade process is not complicated. The following is a 2015 2016 Mercedes-Benz SMART car radio installation guide. If you own the same or similar dashboard and you plan to upgrade your factory radio, you can refer to the guide carefully.

2015 2016 Mercedes-Benz SMART GPS Bluetooth Car Radio after installation
2015 2016 Mercedes-Benz SMART GPS Bluetooth Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2015 2016 Mercedes-Benz SMART car radio installation guide

1. Remove the decoration trim strips both on the left side and right side of the radio.

Remove the decoration trim strips both on the left side and right side of the radio
Remove the decoration trim strips both on the left side and right side of the radio
1-1
1-1
1-2
1-2

2. Use a plastic removal tool to pry the gap.

Use a plastic removal tool to pry the gap
Use a plastic removal tool to pry the gap
2-1
2-1
2-2
2-2

3. Gently take out the original radio.

Gently take out the original radio
Gently take out the original radio
3-1
3-1

4. Unplug the connectors and cables at the back of the radio.

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car radio to your original stereo’s plugs.

8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car radio into the dash.

10. Put everything into their original place. All the installation is done.

 

Wish you succeed in the car radio installation with the help of the above installation guide. If you encounter any problems you cannot deal with by yourself, please don’t hesitate to seek help from your dealer, someone experienced or a professional. Anyway, before installation, please do select an ideal car radio. If you don’t have any ideas, you can refer to the following link which is a marvelous 2015 2016 Mercedes-Benz SMART car radio from Seicane.

https://www.seicane.com/android-hd-touchscreen-radio-for-2015-2016-mercedes-benz-smart-car-stereo-gps-navigation-system-bluetooth-support-mirror-link-obd2-aux-3g-wifi-dvr-1080p-video-steering-wheel-control-s75b01

This all-in-one car radio supports a wide range of practical and entertainment features, which can add a lot of convenience and enjoyment to your driving.

Under the wireless Bluetooth technology, you are able to dial, answer, reject or mute Bluetooth hands-free calls as well as listen to Bluetooth streaming music from your phone music playlists without taking your hands off the steering wheel. And this car radio’s additional features can also add a lot of fun to your trip.

Wish you have a wonderful driving experience accompanied by this car radio. Good luck!

How to Easily Upgrade a 2004 2005 2006 2007 2008-2010 Toyota Sienna Car Radio with Bluetooth GPS DVD Player Function

Posted on by — 8 Comments ↓ 12,207 views
2004 2005 2006 2007 2008-2010 Toyota Sienna Car Radio after installation

Do you have a 2004 2005 2006 2007 2008-2010 Toyota Sienna? And would you like to create a more convenient and relaxing in-car environment as well as embrace a brand new driving experience? If your answer is “yes”, then you can think about replacing your factory radio with a new aftermarket car radio. The following is a 2004 2005 2006 2007 2008-2010 Toyota Sienna car radio installation instruction from Seicane, which can be taken as your reference.

2004 2005 2006 2007 2008-2010 Toyota Sienna Car Radio after installation
2004 2005 2006 2007 2008-2010 Toyota Sienna Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004 2005 2006 2007 2008-2010 Toyota Sienna car radio installation instruction

1. The original car radio for 2004-2010 Toyota Sienna.

The original car radio for 2004-2010 Toyota Sienna
The original car radio for 2004-2010 Toyota Sienna

2. Use a flat-head screwdriver or a flat pry tool to pry up the vertical panels of the right and left side of the original car radio and climate control system.

Use a flat-head screwdriver or a flat pry tool to pry up the vertical panels of the right and left side of the original car radio and climate control system
Use a flat-head screwdriver or a flat pry tool to pry up the vertical panels of the right and left side of the original car radio and climate control system

3. Disconnect the wiring from the side panels. There are two wiring connectors on the left panel and only one connector on the right panel. Please carefully press the tab to release the connectors.

Disconnect the wiring from the side panels. There are two wiring connectors on the left panel and only one connector on the right panel. Please carefully press the tab to release the connectors
Disconnect the wiring from the side panels. There are two wiring connectors on the left panel and only one connector on the right panel. Please carefully press the tab to release the connectors
3-1
3-1

4. Remove the center channel speaker grill panel above the car radio. Please use a pry tool or a flat head screwdriver to pry up the top (center channel speaker) panel above the car radio and then remove it.

Remove the center channel speaker grill panel above the car radio. Please use a pry tool or a flat head screwdriver to pry up the top (center channel speaker) panel above the car radio and then remove it
Remove the center channel speaker grill panel above the car radio. Please use a pry tool or a flat head screwdriver to pry up the top (center channel speaker) panel above the car radio and then remove it
4-1
4-1

5. Remove the center speaker. There are two 10mm hex head nuts securing the center speaker, so you need to use a 10-mm Hollow-Shank nut screwdriver to remove these two bolts.

Remove the center speaker. There are two 10mm hex head nuts securing the center speaker, so you need to use a 10-mm Hollow-Shank nut screwdriver to remove these two bolts
Remove the center speaker. There are two 10mm hex head nuts securing the center speaker, so you need to use a 10-mm Hollow-Shank nut screwdriver to remove these two bolts

6. Disconnect the speaker wiring harness. Please press the tab down so as to release the wiring connector, and then set the speaker and bolts aside.

Disconnect the speaker wiring harness. Please press the tab down so as to release the wiring connector, and then set the speaker and bolts aside
Disconnect the speaker wiring harness. Please press the tab down so as to release the wiring connector, and then set the speaker and bolts aside

7. Remove the 4 10mm hex head nuts from the car radio. There are 4 bolts holding the car radio in the dash (2 on each side). Please use a screwdriver to remove these four bolts.

Remove the 4 10mm hex head nuts from the car radio. There are 4 bolts holding the car radio in the dash (2 on each side). Please use a screwdriver to remove these four bolts
Remove the 4 10mm hex head nuts from the car radio. There are 4 bolts holding the car radio in the dash (2 on each side). Please use a screwdriver to remove these four bolts
7-1
7-1

8. Gently pull the original car radio out of the dash and then disconnect the wiring from the original car radio. Then put the original car radio aside.

Gently pull the original car radio out of the dash and then disconnect the wiring from the original car radio. Then put the original car radio aside
Gently pull the original car radio out of the dash and then disconnect the wiring from the original car radio. Then put the original car radio aside
8-1
8-1

9. If necessary, please remove the left and right radio mounting brackets to install on the new Seicane car radio.

If necessary, please remove the left and right radio mounting brackets to install on the new Seicane car radio
If necessary, please remove the left and right radio mounting brackets to install on the new Seicane car radio

10. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

11. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

12. Connect the Seicane car radio to your original car radio’s plugs.

Connect the Seicane car radio to your original car radio's plugs
Connect the Seicane car radio to your original car radio’s plugs

13. Gently place the new Seicane car radio into the opening of the dash and test it.

14. Re-seat the stereo in the dash and reinstall the 4 bolts.

15. Carefully reconnect the center speaker and reinstall the 2 bolts.

Carefully reconnect the center speaker and reinstall the 2 bolts
Carefully reconnect the center speaker and reinstall the 2 bolts

16. Carefully reinstall top center channel speaker grill panel.

Carefully reinstall top center channel speaker grill panel
Carefully reinstall top center channel speaker grill panel

17. Reconnect all the electrical connectors and then reinstall the left and right side panels.

 

Wish you can succeed in the whole upgrade process of this unit. If you have any doubts, you can consult your dealer for seeking advice or turn to a professional for help. Anyway, first of all, please select an ideal car radio for your beloved car. If you don’t have any ideas, I’d like to recommend a great 2004 2005 2006 2007 2008-2010 Toyota Sienna car radio from Seicane to you. For more details, please click:

https://www.seicane.com/oem-android-2004-2010-toyota-sienna-radio-dvd-gps-navigation-system-with-bluetooth-hd-touchscreen-mirror-link-4g-wifi-aux-dvr-1080p-dab-tpms-backup-camera-s166205

This great car radio, featured with the intelligent Android 7.1 operation system and a high-quality quad-core CPU processor, enables you to enjoy its fast response, smooth operation and high performance.

Thanks to the turn-by-turn directions and voice prompts provided by the 3D GPS navigation system, you can easily know your current locations and navigate to your desired destinations. And with dual zone function, this unit enables you to listen to your favorite music while navigating. And the music can automatically switch to GPS voice.

Additionally, this unit also comes with some entertainment features to add a lot of fun to your driving.

Wish you like this unit and good luck to you.

The Advanced Instruction on a 2014 2015 2016 2017 Jeep Grand Cherokee Car Radio Removal and Installation with a Bluetooth GPS Navigation System

Posted on by — No Comments ↓ 7,915 views
2014 2015 2016 2017 Jeep Grand Cherokee Car Radio after installation

There is no denying that with an ideal car radio installed in your car, you can get access to a wide range of practical and entertainment features. So if you are fed up with your factory radio, you can replace it with a new aftermarket car radio. And with a related installation guide, you can also try to remove the factory radio and install the new car radio. The following is a 2014 2015 2016 2017 Jeep Grand Cherokee car radio installation guide from Seicane. Wish you can get some help from it.

2014 2015 2016 2017 Jeep Grand Cherokee Car Radio after installation
2014 2015 2016 2017 Jeep Grand Cherokee Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriverbefore the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2014 2015 2016 2017 Jeep Grand Cherokee car radio installation guide

1. Prepare a plastic removal tool. Remove the AC control panel.

Prepare a plastic removal tool. Remove the AC control panel
Prepare a plastic removal tool. Remove the AC control panel
1-1
1-1

2. Remove two screws below.

Remove two screws below
Remove two screws below
2-1
2-1

3. Remove the radio trim panel with a plastic removal tool.

Remove the radio trim panel with a plastic removal tool
Remove the radio trim panel with a plastic removal tool
3-1
3-1

4. Unscrew four screws that are holding the radio on the dashboard.

Unscrew four screws that are holding the radio on the dashboard
Unscrew four screws that are holding the radio on the dashboard

5. Gently remove the original radio.

Gently remove the original radio
Gently remove the original radio

6. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio
Disconnect the connectors and cables at the back of the radio

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original stereo’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Wish the above removal and installation steps can be helpful for you. If you have any questions, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. Besides, to help you select an ideal car radio, here I would like to share an amazing 2014 2015 2016 2017 Jeep Grand Cherokee car radio from Seicane with you.

https://www.seicane.com/hd-touch-screen-2014-2015-2016-2017-jeep-cherokee-android-radio-gps-navigation-bluetooth-music-usb-wifi-audio-system-support-dvr-obd2-tpms-digital-tv-backup-camera-1080p-video-auto-a-v-s18jp62

This great 2014 2015 2016 2017 Jeep Grand Cherokee car radio, equipped with the worldwide real-time 3D GPS navigation system, enables you to locate where you are and navigate to your desired destinations through turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to freely listen to your favorite music while navigating. Besides, you can also make full advantage of this unit’s built-in Bluetooth module to get access to hands-free calls and Bluetooth music streaming from your Bluetooth-enabled mobile phone and this unit.

Don’t hesitate to purchase this unit and wish you enjoy your driving accompanied by it!

How to Upgrade a 2015 2016 HYUNDAI TUSCON IX35 (RHD) Car Radio Audio with Bluetooth GPS Navigation Function

Posted on by — No Comments ↓ 5,804 views
2015 2016 HYUNDAI TUSCON IX35 (RHD) Car Radio after installation

As a car owner, you may find that your factory radio will be not compatible with some modern features after being used for a long time. In that case, you can replace it with a new aftermarket car radio. This article is mainly about a 2015 2016 HYUNDAI TUSCON IX35 (RHD) car radio installation guide from Seicane. If you have the same or similar dashboard, you can refer to this guide carefully.

2015 2016 HYUNDAI TUSCON IX35 (RHD) Car Radio after installation
2015 2016 HYUNDAI TUSCON IX35 (RHD) Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2015 2016 HYUNDAI TUSCON IX35 (RHD) car radio installation guide

1. The original car radio.

The original car radio
The original car radio

2. Use plastic removal tools to pry the top panel and remove it.

Use plastic removal tools to pry the top panel and remove it
Use plastic removal tools to pry the top panel and remove it
2-1
2-1

3. Remove three top screws that secure the panel.

Remove three top screws that secure the panel
Remove three top screws that secure the panel

4. Use the plastic removal tool to pry the car radio trim panel.

Use the plastic removal tool to pry the car radio trim panel
Use the plastic removal tool to pry the car radio trim panel

5. Use a kick tool to release two clips.

Use a kick tool to release two clips
Use a kick tool to release two clips

6. Carefully remove the panel.

Carefully remove the panel
Carefully remove the panel

7. Use a screwdriver to remove four screws that hold the original car radio on the dashboard.

Use a screwdriver to remove four screws that hold the original car radio on the dashboard
Use a screwdriver to remove four screws that hold the original car radio on the dashboard

8. Gently take out the original car radio.

Gently take out the original car radio
Gently take out the original car radio

9. Disconnect connectors and cables at the back the radio.

10. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

11. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

12. Connect the Seicane car radio to your original radio’s plugs.

13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14. Put the new Seicane car radio into the dash.

15. Put everything into their original place. All the installation is done.

 

Wish you can gain some inspiration from the above installation guide. If you have any doubts, you can seek help from your dealer, someone experienced or a professional. Or you can directly arrange a professional technician to help you install the new car radio.

Besides, it is essential for you to select an ideal car radio for your beloved car. If you have no ideas, I’d like to share an amazing 2015 2016 HYUNDAI TUSCON IX35 (RHD) car radio from Seicane with you. Here comes the link, please click:

https://www.seicane.com/touchscreen-for-android-2015-hyundai-tuscon-ix35-rhd-dvd-player-radio-gps-bluetooth-navigation-system-car-stereo-with-1080p-video-mirror-link-steering-wheel-control-3g-wifi-obd2-tpms-backup-camera-s18hy065r

Compatible with a wide range of practical and entertainment features, this car radio can provide you with a brand new driving experience.

Thanks to the worldwide real-time GPS navigation system, you are able to know your current locations and navigate to your desired destinations through turn-by-turn directions. And this unit’s dual zone function enables you to freely listen to radio, USB or SD card music playback.

Besides, this unit’s additional entertainment features will add a lot of joyfulness to your driving.

Wish you like this unit and good luck to you.

A Common Way to Upgrade a 2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 Car Radio with Bluetooth GPS Navigation DVD Player

Posted on by — No Comments ↓ 8,406 views
2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 Car Radio after installation

Believe it or not, to install a remarkable all-in-one car radio for your car will bring your great convenience and enjoyment during driving. Therefore, more and more car owners would like to replace their old factory radio with a new aftermarket car radio. If you also want to upgrade your factory radio, you can find a related installation guide to help you. The following is a 2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 car radio installation guide from Seicane. If you have the same or similar dashboard, you can refer to this guide carefully.

2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 Car Radio after installation
2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 Car Radio after installation

Before and during installation, you should notice:

1. Before connecting,please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire,so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 car radio installation guide

1. Remove the padded covers from the two sides of the lower section at the center of the dash.

Remove the padded covers from the two sides of the lower section at the center of the dash
Remove the padded covers from the two sides of the lower section at the center of the dash
1-1
1-1

2. Next remove the silver Philips-head screw at the top and unclip the plastic retainer at the bottom of each side cover.

Next remove the silver Philips-head screw at the top and unclip the plastic retainer at the bottom of each side cover
Next remove the silver Philips-head screw at the top and unclip the plastic retainer at the bottom of each side cover

3. Remove the side covers by pulling them towards the rear of the vehicle and slightly outwards.

Remove the side covers by pulling them towards the rear of the vehicle and slightly outwards
Remove the side covers by pulling them towards the rear of the vehicle and slightly outwards
3-1
3-1

4. Carefully remove the top cover by using a plastic flat removal tool.

5. Remove the air conditioning vents, and then disconnect the temperature control wires.

Remove the air conditioning vents, and then disconnect the temperature control wires
Remove the air conditioning vents, and then disconnect the temperature control wires

6. Remove the radio fascia and disconnect the wires at the back of it.

Remove the radio fascia and disconnect the wires at the back of it
Remove the radio fascia and disconnect the wires at the back of it

7. Pull out the lower segment containing the ashtray and power outlets.

8. Remove the air conditioning control and display section and its wiring connector.

Remove the air conditioning control and display section and its wiring connector
Remove the air conditioning control and display section and its wiring connector
8-1
8-1

9. Remove screws that fix the radio on the dashboard.

10. Disconnect the connectors at the back of the radio.

11. Check all the accessories for the new Seicane car radio.

12. Connect the harnesses to the back of the new Seicane car radio.

13. Connect the Seicane car radio to your original radio’s plugs.

14. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

15. Put the new Seicane car radio into the dash.

16. Put everything into their original place.

 

Wish the above installation guide can do some help for your upgrading. If you have any doubts, you can turn your dealer or a professional for help. Or you can ask someone experienced to help you alongside. Besides, to help your better choose a suitable car radio for your car, I’d like to share a remarkable 2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/oem-android-dvd-player-for-2004-2016-toyota-land-cruiser-lc200-radio-replacement-with-touch-screen-gps-car-stereo-bluetooth-music-mirror-link-obd2-3g-wifi-video-backup-camera-s18t265

This unit is upgraded to the most advanced Android 7.1.2 operation system and a high-quality quad-core CPU processor, so you can enjoy its higher configuration and better performance.

With the worldwide real-time GPS navigation system built in this unit, you can easily locate where you are and navigate to your desired destinations through turn-by-turn directions and voice prompts. And while navigating, you can also listen to radio, USB or SD card music playback thanks to this unit’s dual zone function.

And under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this car radio so as to get access to Bluetooth hands-free calls and Bluetooth streaming music which can bring you both convenience and joyfulness during driving.

Wish you like it and good luck to you!