Home › View all posts by john › Page 21

Author: john

The Effective Method to Install a 2006-2012 TOYOTA RAV4 Car Radio with GPS Navigation System Bluetooth DVD Player

Posted on by — No Comments ↓ 5,318 views
2006-2012 TOYOTA RAV4 Car Radio after installation

To enhance the capacities in your car as well as upgrade your in-car life, you can easily replace your factory radio with a brand new multifunctional car radio which can support a lot of comprehensive features for you to enjoy more convenience and enjoyment. If you have some experience on the installation, it is easier for you to install a new car radio in your car with a related installation guide. Here I would like to share the detailed 2006-2012 TOYOTA RAV4 car radio installation instruction with you. Wish it is helpful for you.

2006-2012 TOYOTA RAV4 Car Radio after installation
2006-2012 TOYOTA RAV4 Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006-2012 TOYOTA RAV4 car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Remove the panel by using plastic removal tool.

Remove the panel by using plastic removal tool
Remove the panel by using plastic removal tool

3. Unplug the hazard warning lights.

Unplug the hazard warning lights
Unplug the hazard warning lights

4. Remove the left panel and unplug the switch.

Remove the left panel and unplug the switch
Remove the left panel and unplug the switch

5. Unplug the switch.

Unplug the switch
Unplug the switch

6. Remove four screws.

Remove four screws
Remove four screws
6-1
6-1 a. Position for screws.

7. Pull out the factory radio.

Pull out the factory radio
Pull out the factory radio

8. The back of the original car radio.

The back of the original car radio
The back of the original car radio

9. Remove 8 screws from original car radio.

Remove 8 screws from original car radio
Remove 8 screws from original car radio
9-1
9-1

10. Remove 2 screws at the top of the new radio.

Remove 2 screws at the top of the new radio
Remove 2 screws at the top of the new radio
10-1
10-1

11. Install 8 screws to new car radio.

Install 8 screws to new car radio
Install 8 screws to new car radio

12. Plug into factory plugs.

Plug into factory plugs
Plug into factory plugs

13. All plugs after connection.

All plugs after connection
All plugs after connection
13-1
13-1

14. Check all the accessories for the new Seicane car radio.

15. Connect the harnesses to the back of the new Seicane car radio.

16. Connect the Seicane car radio to your original car radio ‘s plugs.

17. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

18. If the new Seicane car radio works well, put it into the dash.

19. Put everything into their original place, and all the installation is done.

 

Please don’t worry if you have any doubts about your car radio and your car. To overcome your doubts, you can contact your dealer, or seek help from someone experienced or a professional. Anyway, it is very vital for you to check if your new car radio can fit your car well. If it is not compatible enough, you’d better quit it and buy another suitable one. Here I would like to share a fabulous 2006-2012 TOYOTA RAV4 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-aftermarket-radio-for-2006-2012-toyota-rav4-with-gps-navigation-hd-touchscreen-dvd-player-bluetooth-wifi-mirror-link-steering-wheel-control-1080p-video-s127106e

Upgraded to the stable Android 6.0 operation system, 8- core 1.5 GHz RK-PX5 A53 processor and 32GB Inland flash as well as 2GB RAM, this unit’s capabilities and performance can be enhanced to a large extent.

You won’t get lost any more since this car radio is equipped with the high-accuracy worldwide real-time GPS navigation system. When you turn on GPS function, you can quickly locate where you are and find the right way to reach your desired destinations according to turn-by-turn directions and voice prompts. And while navigating, you can freely listen to your favorite music thanks to this unit’s dual zone function.

Under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this unit, so you can dial, answer, reject and mute hands-free calls as well as listen to Bluetooth streaming music from your phone music playlists without taking your hands off the steering wheel.

Wish you like this unit and good luck to you!

How to Replace a 2007 2008 2009 2010 2011 2012 2013 Toyota Land Cruiser 200 Car Radio with Bluetooth GPS Audio Navigation System

Posted on by — 4 Comments ↓ 6,785 views
2007 2008 2009 2010 2011 2012 2013 Toyota Land Cruiser 200 Car Radio after installation

There is no denying that an ideal car radio can plays a very significant role in a car as a center practical and entertainment unit. If you are tired of your factory radio’s simple functions, you can find a related car radio installation guide to help you deal with the installation. Here I would like to share a 2007 2008 2009 2010 2011 2012 2013 Toyota Land Cruiser 200 car radio installation guide from Seicane with you. If you have the same or similar dashboard, you can read the following guide carefully. Wish you can get some help from it.

2007 2008 2009 2010 2011 2012 2013 Toyota Land Cruiser 200 Car Radio after installation
2007 2008 2009 2010 2011 2012 2013 Toyota Land Cruiser 200 Car Radio after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007 2008 2009 2010 2011 2012 2013 Toyota Land Cruiser 200 car radio installation steps

1. Remove the padded covers from the two sides of the lower section at the center of the dash.

Remove the padded covers from the two sides of the lower section at the center of the dash
Remove the padded covers from the two sides of the lower section at the center of the dash
1-1
1-1

2. Next remove the silver Philips-head screw at the top and unclip the plastic retainer at the bottom of each side cover.

Next remove the silver Philips-head screw at the top and unclip the plastic retainer at the bottom of each side cover
Next remove the silver Philips-head screw at the top and unclip the plastic retainer at the bottom of each side cover

3. Remove the side covers by pulling them towards the rear of the vehicle and slightly outwards.

Remove the side covers by pulling them towards the rear of the vehicle and slightly outwards
Remove the side covers by pulling them towards the rear of the vehicle and slightly outwards
3-1
3-1

4. Carefully remove the top cover by using a plastic flat removal tool.

5. Remove the air conditioning vents, and then disconnect the temperature control wires.

Remove the air conditioning vents, and then disconnect the temperature control wires
Remove the air conditioning vents, and then disconnect the temperature control wires

6. Remove the radio fascia and disconnect the wires at the back of it.

Remove the radio fascia and disconnect the wires at the back of it
Remove the radio fascia and disconnect the wires at the back of it

7. Pull out the lower segment containing the ashtray and power outlets.

8. Remove the air conditioning control and display section and its wiring connector.

Remove the air conditioning control and display section and its wiring connector
Remove the air conditioning control and display section and its wiring connector
8-1
8-1

9. Remove screws that fix the radio on the dashboard.

10. Disconnect the connectors at the back of the radio.

11. Check all the accessories for the new Seicane car radio.

12. Connect the harnesses to the back of the new Seicane car radio.

13. Connect the Seicane car radio to your original radio’s plugs.

14. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

15. Put the new Seicane car radio into the dash.

16. Put everything into their original place.

 

Wish you can learn some skills from the above installation instruction. If there are any difficulties you met and don’t know how to overcome, you can seek help from your dealer, someone experienced or a professional. If you still think it hard for you to finish the whole installation process, you can directly arrange a professional technician to help you install the new car radio.

However, if you are still searching for an ideal car radio for your car, you can check out the following link which is a remarkable 2007 2008 2009 2010 2011 2012 2013 Toyota Land Cruiser 200 car radio from Seicane.

https://www.seicane.com/cheap-8-inch-2007-2008-2009-2010-2011-2012-2013-toyota-land-cruiser-200-radio-replacement-with-android-dvd-navigation-auto-a-v-system-with-multi-touch-capacitive-screen-3g-wifi-radio-rds-bluetooth-music-mirror-link-obd-dvr-hd-1080p-backup-s128102e

This car radio is running on the most stable Android 6.0 operation system, a powerful 8-core 1.5 GHz RK-PX5 A53 processor and 32GB Inland flash as well as 2GB RAM. It comes with a wide range of practical and entertainment features to meet with your different requirements, mainly including 3D GPS navigation system, FM/ AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, DVD player, steering wheel control, USB connection, etc. Making full use of these upgraded and new features allows you to enjoy a lot of convenience and enjoyment.

Apart from these main features, you can also add some optional features to this unit, like as car DVR, OBD2, DAB, backup camera, TPMS, etc. For instance, you can add a backup camera to this unit for automatically switching to the parking image while reversing, which is good for your driving safety.

Wish you enjoy your wonderful trip accompanied with this unit and good luck to you!

The Best Tutorial on a 2006-2013 BMW Mini Cooper GPS Bluetooth Car Stereo Removal and Installation

Posted on by — 14 Comments ↓ 16,796 views
2006-2013 BMW Mini Cooper GPS Bluetooth Car Stereo after installation

Have you ever tried to install a car stereo before? If not, you may think it very hard for you to finish the whole installation process of a car stereo. As a matter of fact, with a step-by-step installation instruction and some related installation experience, you can also try to deal with the installation. However, if it is the first time for you to upgrade your factory radio, you’d better ask a professional for help. The following is a detailed 2006-2013 BMW Mini Cooper car stereo installation guide. You can read it carefully before you start to install your new car stereo.

2006-2013 BMW Mini Cooper GPS Bluetooth Car Stereo after installation
2006-2013 BMW Mini Cooper GPS Bluetooth Car Stereo after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2006-2013 BMW Mini Cooper car stereo installation guide

1. Remove two tabs in the air conditioning vent above the dash.

Remove two tabs in the air conditioning vent above the dash
Remove two tabs in the air conditioning vent above the dash

2. Remove the tachometer and set it aside.

Remove the tachometer and set it aside
Remove the tachometer and set it aside

3. Remove the crew pocket panel with a lever, then put it aside.

Remove the crew pocket panel with a lever, then put it aside
Remove the crew pocket panel with a lever, then put it aside

4. Open the glove box compartment, and remove the panel inside shown as the picture.

Open the glove box compartment, and remove the panel inside shown as the picture
Open the glove box compartment, and remove the panel inside shown as the picture

5. Pop out the panel beneath the steering wheel with a lever and your hands.

Pop out the panel beneath the steering wheel with a lever and your hands
Pop out the panel beneath the steering wheel with a lever and your hands

6. Remove the side panel with a lever and your hands.

Remove the side panel with a lever and your hands
Remove the side panel with a lever and your hands

7. Remove the other side panel shown as the picture with a lever.

Remove the other side panel shown as the picture with a lever
Remove the other side panel shown as the picture with a lever

8. Remove the panel under the air-conditioning control with a lever.

Remove the panel under the air-conditioning control with a lever
Remove the panel under the air-conditioning control with a lever

9. Unscrew all the screws holding the plastic cover with a screwdriver.

Unscrew all the screws holding the plastic cover with a screwdriver
Unscrew all the screws holding the plastic cover with a screwdriver

10. Remove the panel on the factory radio with your hands.

Remove the panel on the factory radio with your hands
Remove the panel on the factory radio with your hands

11. Remove the plastic cover of the whole air conditioning control.

Remove the plastic cover of the whole air conditioning control
Remove the plastic cover of the whole air conditioning control

12. Disconnect the connectors at the back of the cover.

Disconnect the connectors at the back of the cover
Disconnect the connectors at the back of the cover

13. Unscrew all screws holding the factory radio with a screwdriver.

Unscrew all screws holding the factory radio with a screwdriver
Unscrew all screws holding the factory radio with a screwdriver

14. Gently take the factory radio out of the dashboard.

15. Check all the accessories for the new Seicane stereo.

Check all the accessories for the new Seicane stereo
Check all the accessories for the new Seicane stereo

16. Connect the harnesses to the back of the new Seicane stereo.

Connect the harnesses to the back of the new Seicane stereo
Connect the harnesses to the back of the new Seicane stereo

17. Connect the Seicane stereo to your original car radio’s plugs.

18. Check whether the new Seicane stereo is working without problem.

19. If there is no problem, firm removed screws and bolts that are put aside, then make trim panel back on your new Seicane stereo.

 

Please don’t worry if you encounter any problems about the installation. To solve these problems, you can seek help from your dealer, someone experienced or a professional. If you are afraid of causing damage to your car stereo or your car, you can just go to a car stereo upgrade center to ask a technician to help you install the car stereo.

However, if you are still looking for a suitable car stereo for your beloved car, you might as well check out the following link which is a 2006-2013 BMW Mini Cooper GPS Bluetooth Car Stereo from Seicane.

https://www.seicane.com/android-2006-2013-bmw-mini-cooper-s-d-radio-dvd-player-gps-navigation-system-with-hd-touch-screen-wifi-mirror-link-usb-sd-bluetooth-music-aux-1080p-video-digital-tv-steering-wheel-control-s127017e

This intelligent car stereo runs on the pure Android 6.0 operation system, 8 – Core 1.5 GHz RK-PX5 A53 processor and 32GB Inland flash as well as 2GB RAM. So with such a car stereo installed in your car, you will be provided with the best services thanks to the enhanced capacities, higher configuration and better performance.

With the assistance of the high-accuracy 3D GPS navigation function, you don’t need to worry about getting lost any more even though you don’t have a good sense of directions. With the GPS function, you have no difficulties knowing your current locations and finding the right way to get to your destinations through turn-by-turn directions and voice prompts.

And what’s more, under the wireless Bluetooth technology, you can dial, answer, reject and mute hands-free calls as well as listen to streaming music from your phone.

Wish you like it! Good luck to you!

The Direct Instruction on a 1998-2006 BMW M3 Car Stereo with DVD Player Bluetooth GPS Navigation System

Posted on by — No Comments ↓ 2,637 views
1998-2006 BMW M3 Car Stereo after installation

As a car owner of a 1998-2006 BMW M3, if your original car radio becomes too outdated after a long-term use, you may want to replace it with a brand new car stereo. A qualified car stereo can support a lot of practical and entertainment features which can enrich your in-car life and make it be filled in convenience and entertainment. With a correct installation instruction, you can also try to finish the installation process on your own. Here is a detailed 1998-2006 BMW M3 car stereo installation instruction for your reference. Wish it is helpful for you.

1998-2006 BMW M3 Car Stereo after installation
1998-2006 BMW M3 Car Stereo after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

1998-2006 BMW M3 car stereo installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Remove the surrounding trim panel with a plastic removal tool.

Remove the surrounding trim panel with a plastic removal tool
Remove the surrounding trim panel with a plastic removal tool
2-1
2-1
2-2
2-2

3. Remove two screws fixed the radio on the dashboard.

Remove two screws fixed the radio on the dashboard
Remove two screws fixed the radio on the dashboard
3-1
3-1

4. Gently pull out the original car radio.

Gently pull out the original car radio
Gently pull out the original car radio

5. Unplug the connectors and cables at the back of the radio.

Unplug the connectors and cables at the back of the radio
Unplug the connectors and cables at the back of the radio

6. Remove the A/C control and unplug the connectors.

Remove the A/C control and unplug the connectors
Remove the A/C control and unplug the connectors
6-1
6-1

7. Remove two screws holding the heat vent.

Remove two screws holding the heat vent
Remove two screws holding the heat vent
7-1
7-1

8. Remove screws so as to remove radio frame.

Remove screws so as to remove radio frame
Remove screws so as to remove radio frame

9. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo
Check all the accessories for the new Seicane car stereo

10. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo
Connect the harnesses to the back of the new Seicane car stereo

11. Connect the Seicane car stereo to your original radio’s plugs.

12. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane car stereo into the dash.

14. Put everything into their original place. All the installation is done.

 

If you cannot fully make clear every detailed step, then you can consult your dealer, communicate with someone experienced or seek help from a professional. Or you can straightly arrange a technician to help install the car stereo. But if you haven’t got a suitable car stereo, I’d like to share a great car stereo from Seicane which is for a 1998-2006 BMW M3. Here comes the related link, please click:

https://www.seicane.com/8-core-android-1998-2006-bmw-m3-radio-upgrade-with-1024-600-multi-touch-capacitive-screen-gps-bluetooth-stereo-3g-wifi-cd-dvd-player-obd2-mirror-link-steering-wheel-control-reverse-camera-hd-1080p-s12746e

Integrated with the most stable Android 6.0 operation system and a powerful 8-core 1.5 GHz RK-PX5 A53 processor, this great car stereo also comes with a wide range of comprehensive features to meet your various needs in car.

When you are in an unfamiliar place, as long as you turn on the 3D GPS function of high accuracy, you can locate where you are and navigate to your desired destinations according to turn-by-turn directions and voice prompts. While navigating, you can also freely listen to beautiful music from radio, AV, DVD, TV etc.

Thanks to the wireless Bluetooth technology, you can be provided with a journey filled in safety, convenience and enjoyment. You can pair your Bluetooth-enabled mobile phone with this car stereo so as to make, receive, reject and mute hands-free calls as well as stream music from your phone music playlists.

Wish you enjoy your journey accompanied by this car stereo. Good luck to you!

How to Upgrade a 2000-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 C240 C270 C280 Car Radio with DVD Player GPS Navigation System

Posted on by — 10 Comments ↓ 18,647 views
2000-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 C240 C270 C280 Car Radio after installation

As a car owner, when you are considering replacing your factory radio with a brand new car radio, you may wonder what a new car radio may bring to you. As a matter of fact, a modern new car radio can not only meet almost all your practical and entertainment needs in a car but also improve your driving experience to next level. If you have some related installation experience, you can consider installing it by yourself. If you own a 2000-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 C240 C270 C280, you can refer to the following detailed installation guide.

2000-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 C240 C270 C280 Car Radio after installation
2000-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 C240 C270 C280 Car Radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2000-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 C240 C270 C280 car radio installation guide

1. The original car radio.

The original car radio
The original car radio

2. Use a special plastic tool to remove the trim bazel.

Use a special plastic tool to remove the trim bazel
Use a special plastic tool to remove the trim bazel
2-1
2-1

3. Use a plastic remove tool to push up the heat vent.

Use a plastic remove tool to push up the heat vent
Use a plastic remove tool to push up the heat vent
3-1
3-1

4. Remove 2 hidden screws with a screwdriver below the vent.

Remove 2 hidden screws with a screwdriver below the vent
Remove 2 hidden screws with a screwdriver below the vent
4-1
4-1

5. Push down the vent and loose it.

Push down the vent and loose it
Push down the vent and loose it

6. Remove the trim panel with a plastic removal tool.

Remove the trim panel with a plastic removal tool
Remove the trim panel with a plastic removal tool

7. Remove 2 screws that are holding the car radio.

Remove 2 screws that are holding the car radio
Remove 2 screws that are holding the car radio
7-1
7-1

8. Take out the original car radio.

Take out the original car radio
Take out the original car radio

9. Unplug the connectors and cables at the back of the radio.

Unplug the connectors and cables at the back of the radio
Unplug the connectors and cables at the back of the radio

10. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

11. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

12. Connect the Seicane car radio to your original radio’s plugs.

13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14. Put the new Seicane car radio into the dash.

15. Put everything into their original place. All the installation is done.

 

Before installation, please make clear every detailed step. If you have anything you cannot understand, please feel free to consult your dealer for a wiring diagram, seek advice from someone experienced or turn to a professional for help. Anyway, it is especially important for you to select an ideal car radio for your beloved car. If you have no ideas, I’d like to share an excellent 2000-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 C240 C270 C280 car radio from Seicane with you. For more details, please click:

http://www.seicane.com/7-inch-pure-android-2000-2005-mercedes-benz-c-class-w203-c180-c200-c220-c230-c240-c270-c280-multimedia-gps-radio-car-audio-system-with-hd-1024-600-touch-screen-3g-wifi-dvd-player-bluetooth-obd2-mirror-link-backup-camera-s127507e

Based on the most advanced Android 6.0 operation system, 8-core 1.5 GHz RK-PX5 A53 processor and 2GB RAM as well as 32GB INand Flash, this powerful car radio can be taken into your consideration when you pan to upgrade your factory radio in a 2000-2005 Mercedes Benz C Class W203 C180 C200 C220 C230 C240 C270 C280.

This intelligent car radio comes with a wide range of comprehensive features, including 3D GPS navigation system, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, CD/DVD player, file management, steering wheel control, USB&SD connection, etc. With these strong comprehensive features, you are able to be provided with the best driving experience full of safety, comfort, convenience and enjoyment.

Just add this intelligent car radio to your shopping cart right now and wish you enjoy your driving from now on! Good luck to you!

How to Successfully Achieve 2008-2014 Toyota Highlander GPS Bluetooth Car Radio Upgrade

Posted on by — 2 Comments ↓ 10,894 views
2008-2014 Toyota Highlander GPS Bluetooth Car Radio after installation

To improve your in-car environment and take your driving experience up a notch, I would like to suggest you to upgrade your factory radio by installing a brand new car radio which is compatible with a wide range of comprehensive features to meet almost all your needs in car. And to succeed in the upgrade, a detailed installation guide is especially necessary. Here I would like to introduce how to install a 2008-2014 Toyota Highlander car radio. If you have the same dashboard, you can take this guide as reference.

2008-2014 Toyota Highlander GPS Bluetooth Car Radio after installation
2008-2014 Toyota Highlander GPS Bluetooth Car Radio after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008-2014 Toyota Highlander car radio installation guide

1. Carefully pry lower dash panel out.

Carefully pry lower dash panel out
Carefully pry lower dash panel out
1-1
1-1

2. Grip onto the A/C control panel, and give it quick tug to remove.

Grip onto the A/C control panel, and give it quick tug to remove
Grip onto the A/C control panel, and give it quick tug to remove

3. Gently pry out air vent and bazel above the radio.

Gently pry out air vent and bazel above the radio
Gently pry out air vent and bazel above the radio

4. There are four 10mm bolts to be removed.

There are four 10mm bolts to be removed
There are four 10mm bolts to be removed

5. Remove these four 10mm bolts with a screwdriver.

Remove these four 10mm bolts with a screwdriver
Remove these four 10mm bolts with a screwdriver

6. Gently pull the radio out of the dashboard.

Gently pull the radio out of the dashboard
Gently pull the radio out of the dashboard

7. Disconnect the connectors and cables at the back of the radio.

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original radio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place.

 

That’s all about how to install a brand new car radio for 2008-2014 Toyota Highlander. If you have any doubts, you can consult your dealer for seeking advice or ask a professional for help. However, if you haven’t had any related installation experience ever before, you’d better go to a car radio upgrade center to arrange a technician to help you install the radio directly.

Besides, here I would like to share a remarkable 2008-2014 Toyota Highlander GPS Bluetooth Car Radio from Seicane with you for your reference. For more details, please click:

http://www.seicane.com/10-1-inch-pure-android-2008-2014-toyota-highlander-radio-removal-with-sat-nav-car-audio-system-1024-600-multi-touch-capacitive-screen-mirror-link-obd2-3g-wifi-aux-s121012e

With this remarkable 2008-2014 Toyota Highlander car radio in your car, you are able to build up a more convenient, more comfortable and more relaxing in-car environment as well as a high-quality driving experience.

Loaded with the latest Android 6.0 operation system, 8-core 1.5 GHz RK-PX5 A53 processor and 2GB RAM, this unit provides you with smoother, faster and better operation experience and performance.

The large 10.1 inch HD 1024*600 multi-touch screen enables you to enjoy the amazing display effect when you are watching videos, TV programs and movies, etc as well as have a perfect view of the road ahead.

Thanks to the high-precision GPS navigation system, you are able to quickly know your current locations and find the most suitable way to accurately reach your desired destinations according to turn-by-turn directions and voice prompts.

Wish you like it and good luck to you!

How to Remove and Install a 2006-2012 TOYOTA RAV4 Car Radio with Bluetooth GPS Navigation System

Posted on by — No Comments ↓ 20,800 views
2006-2012 TOYOTA RAV4 Car Radio after installation

When driving out, you must want to get to a lot of locations without getting lost and have great entertainment at the same time. In that case, it is necessary for you to install a powerful car radio which is integrated with GPS navigation function and entertainment features. If you are tired of your factory radio and want to replace it, then a detailed removal and installation guide can be helpful for you. The following instruction is about a 2006-2012 TOYOTA RAV4 car radio from Seicane. If you happen yo have the same dashboard, you can take it as a reference.

2006-2012 TOYOTA RAV4 Car Radio after installation
2006-2012 TOYOTA RAV4 Car Radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006-2012 TOYOTA RAV4 car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Remove the panel by using plastic removal tool.

Remove the panel by using plastic removal tool
Remove the panel by using plastic removal tool

3. Unplug the hazard warning lights.

Unplug the hazard warning lights
Unplug the hazard warning lights

4. Remove the left panel and unplug the switch.

Remove the left panel and unplug the switch
Remove the left panel and unplug the switch

5. Unplug the switch.

Unplug the switch
Unplug the switch

6. Remove four screws.

Remove four screws
Remove four screws

a. Position for screws.

6-1 Position for screws
6-1 Position for screws

7. Pull out the factory radio.

Pull out the factory radio
Pull out the factory radio

8. The back of the original car radio.

The back of the original car radio
The back of the original car radio

9. Remove 8 screws from original car radio.

Remove 8 screws from original car radio
Remove 8 screws from original car radio
9-1
9-1

10. Remove 2 screws at the top of the new radio.

Remove 2 screws at the top of the new radio
Remove 2 screws at the top of the new radio
10-1
10-1

11. Install 8 screws to new car radio.

Install 8 screws to new car radio
Install 8 screws to new car radio

12. Plug into factory plugs.

Plug into factory plugs
Plug into factory plugs

13. All plugs after connection.

All plugs after connection
All plugs after connection
13-1
13-1

14. Check all the accessories for the new Seicane car radio.

15. Connect the harnesses to the back of the new Seicane car radio.

16. Connect the Seicane car radio to your original car radio ‘s plugs.

17. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

18. If the new Seicane car radio works well, put it into the dash.

19. Put everything into their original place, and all the installation is done.

 

After reading the above installation guide, perhaps now you have a general understanding of the installation on a 2006-2012 TOYOTA RAV4 car radio. If there are any doubts, you are welcome to ask for a wiring diagram from your dealer or seek for professional suggestion from a professional. However, if you don’t know which kind of car stereos can work well in your car, I’d like to recommend a fabulous 2006-2012 TOYOTA RAV4 car radio from Seicane to you. For more information, please click:

http://www.seicane.com/android-aftermarket-head-unit-for-2006-2012-toyota-rav4-with-hd-touchscreen-1024-600-radio-rds-gps-navigation-system-bluetooth-wifi-mirror-link-steering-wheel-control-quad-core-s127106

Loaded with the stable Android 5.1.1 operation system and a high quality RK3188 1.6 GHz Cortex A9 Quad-core processor, this unit’s capabilities and performance can be enhanced to provide you with the best services.

Coming with a 7 inch multi-touch screen with 1024*600 pixels, this unit enables you to enjoy the best display effect when you are watching videos, TV programs and movies. Besides, it can provide you with the perfect view of the road ahead.

What’s more, numerous features are compatible with this unit, including 3D GPS navigation, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth music, CD/DVD player, steering wheel control, USB&SD connection, etc. As long as you take full advantage of these features, you will definitely embrace a brand new driving experience.

Wish you like this unit and good luck to you!

How to Install a 2011 onward Hyundai Accent Blue Car Stereo with Bluetooth GPS System

Posted on by — No Comments ↓ 4,369 views
2011 onward Hyundai Accent Blue Car Stereo after installation

After you get an ideal car stereo, have you considered installing it by yourself? As for the installation, you may worry it may be too complicated. Actually, if you have some related installation experience before, you can follow a correct installation guide to help with the installation. If it is the first time for you to install the stereo, it is highly suggested that you should arrange a technician to help you. A detailed 2011 onward Hyundai Accent Blue car stereo installation instruction is as follow. If you own such a car model, you can refer to it.

2011 onward Hyundai Accent Blue Car Stereo after installation
2011 onward Hyundai Accent Blue Car Stereo after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2011 onward Hyundai Accent Blue car stereo installation instruction

1. Pry the edges of the panel with a lever.

Pry the edges of the panel with a lever
Pry the edges of the panel with a lever

2. Remove the panel with your hands.

Remove the panel with your hands
Remove the panel with your hands

3. Disconnect the connectors at the back of the panel.

Disconnect the connectors at the back of the panel
Disconnect the connectors at the back of the panel

4. Unscrew four screws holding the original radio in place with a screwdriver.

Unscrew four screws holding the original radio in place with a screwdriver
Unscrew four screws holding the original radio in place with a screwdriver

5. Take the original radio out of the dash with your hands.

Take the original radio out of the dash with your hands
Take the original radio out of the dash with your hands

6. Disconnect the connectors at the back of the original radio.

Disconnect the connectors at the back of the original radio
Disconnect the connectors at the back of the original radio

7. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo
Check all the accessories for the new Seicane car stereo

8. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo
Connect the harnesses to the back of the new Seicane car stereo

9. Connect the Seicane car stereo to your original car radio’s plugs.

10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car stereo into the dash.

12. Put everything into their original place.

 

Don’t worry if you come across some problems during the installation. To solve the problems, there are three kinds of people you can seek for help, including your dealer, someone experienced and a professional.

To help you select an ideal car stereo to fit your car very well, I’d like to recommend a remarkable 2011 onward Hyundai Accent Blue car stereo from Seicane to you. For more details, please click:

http://www.seicane.com/seicane-s127202-16g-2011-onward-hyundai-accent-blue-system-gps-android-autoradio-dvd-aftermarket-oem-with-mirror-link-obd2-3g-wifi-bluetooth-music-rearview-camera-hd-1080p-video

If you install this powerful 2011 onward Hyundai Accent Blue car stereo which is compatible with numerous comprehensive features in your car, your driving experience will be taken up a notch.

With the assistance of the high-end 3D GPS navigation system, you can quickly locate where you are and accurately navigate to your ideal destinations according to turn-by-turn directions and voice prompts.

Hands-free calls and streaming music are both available as long as you realize the connection between your Bluetooth-enabled mobile phone and this car stereo under the wireless Bluetooth technology.

Besides, some optional functions can also be added to this unit, such as car DVR, backup camera, DAB, etc. The backup camera can be added to this unit which can do some help to your parking.

Just remember to add this unit to your shopping cart. Wish you enjoy your driving from now on. Good luck to you!

How to Upgrade a 2008-2014 TOYOTA Sequoia DVD Player with a Multifunctional Car Radio with Touch Screen Bluetooth GPS Navigation System

Posted on by — 2 Comments ↓ 6,818 views
2008-2014 TOYOTA Sequoia DVD Player after installation

Among a lot of ways to enhance the capacity of your car, to replace your old factory radio with a brand new car radio can be the best and most effective way. However, some car owners may regard the installation of a car radio as a very complicated job. But actually with a correct installation guide and some relative experience, you can also try to install a new car stereo on your own. Today I would like to introduce how to remove and install a car radio. If your car model is 2008-2014 TOYOTA Sequoia, you can refer to the following 2008-2014 TOYOTA Sequoia DVD Player installation instruction.

2008-2014 TOYOTA Sequoia DVD Player after installation
2008-2014 TOYOTA Sequoia DVD Player after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008-2014 TOYOTA Sequoia car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Pry around the panel on the left of the original car radio with a lever, and release it.

Pry around the panel on the left of the original car radio with a lever, and release it
Pry around the panel on the left of the original car radio with a lever, and release it

3. Remove the bottom pocket with your hands.

Remove the bottom pocket with your hands
Remove the bottom pocket with your hands

4. Remove the air conditioner control with a lever.

Remove the air conditioner control with a lever
Remove the air conditioner control with a lever

5. Remove four mounting screws holding the original car radio in place with a screwdriver as pictures below show.

Remove four mounting screws holding the original car radio in place with a screwdriver as pictures below show
Remove four mounting screws holding the original car radio in place with a screwdriver as pictures below show
5-1
5-1
5-2
5-2

6. Take the original car radio out of the dash with your hands.

Take the original car radio out of the dash with your hands
Take the original car radio out of the dash with your hands

7. Disconnect all connectors at the back of the original car radio.

Disconnect all connectors at the back of the original car radio
Disconnect all connectors at the back of the original car radio

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original car radio’s plugs.

11. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12.Put the new Seicane radio into the dash.

13. Put everything into their original place.

 

That’s the installation steps about installing a 2008-2014 TOYOTA Sequoia DVD Player. If you have any questions, you can contact your dealer, seek advice from a professional or a experienced person. If you still think it hard to finish the whole installation process by yourself, we suggest you arrange a technician to help you install the radio straightly.

Besides, if you are still looking for a suitable car radio for your car, you’re recommended to check out the following link which is a 2008-2014 TOYOTA Sequoia DVD Player from Seicane.

http://www.seicane.com/seicane-s127107-android-2008-2014-toyota-sequoia-dvd-player-gps-radio-car-stereo-with-touch-screen-bluetooth-music-3g-wifi-backup-camera-mirror-link-obd2-steering-wheel-control-usb-sd

Equipped with numerous up-to-date features, this 2008-2014 TOYOTA Sequoia DVD Player can be a suitable replacement for your original radio.

With it installed in your car, the 3D GPS navigation can offer the guidance of turn-by-turn directions and voice prompts, so you can easily know your current locations and arrive at your destinations accurately.

The DVD player functionality allows you to play whatever you like to make both yourself and your passengers since there are a wide range of audio and video formats compatible with this unit, including DVD/DIVX/MP4/MP3/MP2/VCD.

And the Bluetooth pairing functionality enables you to enjoy great convenience and enjoyment brought by hands-free calls and streaming music with paying attention to the road ahead and keep your hands on the steering wheel.

Wish you like this car radio. Good luck to you!

How to Upgrade a 2013-2016 Toyota RAV4 Radio with Touch Screen Speakers Sound System

Posted on by — No Comments ↓ 15,349 views
2013-2016 Toyota RAV4 car radio after installation

Do you have a plan to upgrade your factory radio for a more wonderful driving experience? If you do, you have to select a new car radio firstly. After getting a suitable car radio, you can go to a car radio upgrade center to arrange a technician to install the new radio straightly. Or if you have some installation experience before, you can try to install such a radio on your own under a correct installation guide. The following is a 2013-2016 Toyota RAV4 car radio installation guide from Seicane. If you have the same dashboard, you can refer to it carefully so as to finish your installation successfully.

2013-2016 Toyota RAV4 car radio after installation
2013-2016 Toyota RAV4 car radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2013-2016 Toyota RAV4 car radio installation guide

1. Using an automotive trim tool to remove the upper dashboard trim panel. Set the panel aside once removed.

Using an automotive trim tool to remove the upper dashboard trim panel. Set the panel aside once removed
Using an automotive trim tool to remove the upper dashboard trim panel. Set the panel aside once removed
1-1
1-1

2. Gently pry the air conditioning vents on the left and right-hand sides of the factory touch screen unit away from the dashboard.

Gently pry the air conditioning vents on the left and right-hand sides of the factory touch screen unit away from the dashboard
Gently pry the air conditioning vents on the left and right-hand sides of the factory touch screen unit away from the dashboard
2-1
2-1

3. Gently pry the clock display and hazard lamp panel away from the dashboard and set it to the side.

Gently pry the clock display and hazard lamp panel away from the dashboard and set it to the side
Gently pry the clock display and hazard lamp panel away from the dashboard and set it to the side

4. Remove the four retaining screws attaching the factory touch screen unit to the dashboard.

Remove the four retaining screws attaching the factory touch screen unit to the dashboard
Remove the four retaining screws attaching the factory touch screen unit to the dashboard

5. Gently lift the touch screen unit away from the dashboard and lean it forward to gain access to the wiring harnesses on the reverse side.

Gently lift the touch screen unit away from the dashboard and lean it forward to gain access to the wiring harnesses on the reverse side
Gently lift the touch screen unit away from the dashboard and lean it forward to gain access to the wiring harnesses on the reverse side

6. Disconnect the touch screen by unplugging the individual harnesses.

Disconnect the touch screen by unplugging the individual harnesses
Disconnect the touch screen by unplugging the individual harnesses

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place.

 

Wish you can learn some skills to achieve the installation of a 2013-2016 Toyota RAV4 car radio. Don’t worry if you meet some difficulties during the installation. To overcome the difficulties, please feel free to contact your dealer or seek help from a professional technician. Or you can also ask an experienced person to help you alongside during the installation.

Since a car radio matters a lot for the successful installation, you have to choose a suitable car radio for your car first of all. If you don’t have any idea, we suggest you check out the following link which is a 2013-2016 Toyota RAV4 car radio from Seicane. Here comes the link, please click:

http://www.seicane.com/hd-touchscreen-1024-600-car-stereo-for-2013-2016-toyota-rav4-android-radio-gps-navigaion-wifi-am-fm-radio-rds-bluetooth-music-1080p-video-mirror-link-steering-wheel-control-quad-core-s128033

This car radio is upgraded to an advanced Android 5.1.1 operation system and a strong RK3188 1.6 GHz Cortex A9 Quad-core processor to enhance the capabilities as well as smooth the operation.

Hand-free calls and streaming music are both supported if you pair your Bluetooth-enabled mobile phone or other enabled devices with this unit through Bluetooth technology. Therefore, you will embrace a safe and cheerful driving.

Thanks to the 3D GPS navigation system of high precision, you can be accurately guided to any places you’d like to go according to turn-by-turn directions and voice prompts. And with dual-zone function, you can play your favorite music behind the scene under GPS mode which won’t have any influence on GPS function.

What’s more, there are a lot of entertainment ways to relax both yourself and your passengers by this radio, including playing DVDs, CD, VCD, music, TV programs and movies, etc.

What are you waiting for? This radio is at a competitive price now, just take it without hesitation!