Home › View all posts by john › Page 22

Author: john

Excellent Tutorial on a 2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 Radio Removal to Install an All-in-one Stereo CD Player Speakers

Posted on by — 16 Comments ↓ 13,312 views
2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 car stereo after installation

Would you like to listen to your favorite music while you are navigating to your desired destinations under the guidance of GPS navigation system? If your answer is “yes”, you should replace your single functional factory radio with a new aftermarket stereo which supports dual zone function. And to successfully finish the installation, you can find a detailed installation guide to help you. The following is the installation steps on a 2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 car stereo. You might follow them to help with the installation.

2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 car stereo after installation
2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 car stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 car stereo installation steps

1. First detach the gear shift panel.

First detach the gear shift panel
First detach the gear shift panel

2. Use a screw driver to remove the screw marked with a red circle to release the car charger and ashtray.

Use a screw driver to remove the screw marked with a red circle to release the car charger and ashtray
Use a screw driver to remove the screw marked with a red circle to release the car charger and ashtray

3. Remove the car charger and ashtray assembly.

Remove the car charger and ashtray assembly
Remove the car charger and ashtray assembly

4. Use a screw driver to remove the screw marked with a red circle.

Use a screw driver to remove the screw marked with a red circle
Use a screw driver to remove the screw marked with a red circle

5. Pry the air conditioner panel out with a plastic lever.

Pry the air conditioner panel out with a plastic lever
Pry the air conditioner panel out with a plastic lever

6. Remove the original air conditioner panel.

Remove the original air conditioner panel
Remove the original air conditioner panel

7. Remove the heated seat and control panel assembly.

Remove the heated seat and control panel assembly
Remove the heated seat and control panel assembly

8. Pay attention to this buckle.

Pay attention to this buckle
Pay attention to this buckle

9. Remove two screws.

Remove two screws
Remove two screws

10. Pull out the original car radio.

Pull out the original car radio
Pull out the original car radio

11. Check all the accessories for the new Seicane stereo.

Check all the accessories for the new Seicane stereo
Check all the accessories for the new Seicane stereo

12. Connect the harnesses to the back of the new Seicane stereo.

Connect the harnesses to the back of the new Seicane stereo
Connect the harnesses to the back of the new Seicane stereo

13. Connect the Seicane stereo to your original car radio ‘s plugs.

14. Install the new Seicane radio back after the wiring harness has been connected. Fasten the four screws.

Install the new Seicane radio back after the wiring harness has been connected. Fasten the four screws
Install the new Seicane radio back after the wiring harness has been connected. Fasten the four screws

15. Install the air conditioner panel, the car charger, the ashtray, the heated seat and the control panel back.

Install the air conditioner panel, the car charger, the ashtray, the heated seat and the control panel back
Install the air conditioner panel, the car charger, the ashtray, the heated seat and the control panel back

16. Reinstall cigarette lighter.

Reinstall cigarette lighter
Reinstall cigarette lighter

17. Turn on the new Seicane stereo and have a careful check if everything works well.

 

Do not be upset if you meet some difficulties before or during the installation. In order to overcome the difficulties, you can only contact your dealer but also seek help from a professional or an experienced person.

Only a suitable car stereo can work well with your car. So before the installation, please check the compatibility between your new car stereo and your car. If you don’t have a compatible car stereo, you might check out the following link which is a 2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 car stereo from Seicane.

http://www.seicane.com/aftermarket-dvd-player-gps-navigation-system-for-2004-2011-mercedes-benz-clk-w209-clk270-clk320-clk350-clk500-clk550-support-radio-bluetooth-rearview-camera-tv-tuner-usb-sd-canbus-1080p-video-dvr-s127508d

This stereo which is specific for 2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 runs with the latest WinCE 6.0 operation system and a strong MTK3360 800MHZ+250MHZ DSP Dual-Core CPU to provide you with smooth operation and great performance.

When referring the practical features, you must pay attention to its GPS function and Bluetooth connectivity. With the help of the built-in GPS navigation, this stereo enables you to find the best way to reach your desired destinations according to text-to -speech guidance, route planning, lane assist and millions of points of interests. And the dual zone function supported enables you to play your favorite music while navigating.

Under the wireless Bluetooth technology, you can freely connect your Bluetooth-enabled mobile phone or other enabled devices to this unit. By doing so, you can dial, receive, reject and mute hands-free calls as well as listen to your favorite music streaming from your phone music playlists.

Wish you like this unit. Good luck to you!

Effective methods to deal with the steering wheel control problem of a 2005-2013 Alfa Romeo 147 car stereo DVD player GPS navigation

Posted on by — No Comments ↓ 6,760 views
2005-2013 Alfa Romeo 147 car stereo DVD player after installation

Frankly speaking, one of the simplest ways to improve your driving experience in a 2005-2013 Alfa Romeo 147 is to replace your factory radio with a brand new stereo integrated with numerous practical and entertainment features. With a new multifunctional car stereo in your car, you can be offered with not only the greatest convenience but also the entertainment. Although the installation is not difficult, you might encounter any problems. Today I would like to introduce effective instructions to deal with the steering wheel control problem during your installation for a 2005-2013 Alfa Romeo 147 car stereo DVD player.

2005-2013 Alfa Romeo 147 car stereo DVD player after installation
2005-2013 Alfa Romeo 147 car stereo DVD player after installation

Steering wheel control connection instruction

About the steering wheel control, please connect the steering wheel control plug (the red one) to your original car’s steering wheel control plug. Then you will enter the steering wheel control learning interface, you can follow the instructions step-by-step.

The steering wheelcontrol learning instructions are as followings:

After you finish the steering wheel control learning, your original car’s steering wheel buttons will work.

If the steering wheel control still can’t work, then it is the problem of your original car’s steering wheel control cables. Maybe the steering wheel control PIN of your original car’s steering wheel control plug is different from ours. Please find out your original car’s steering wheel control cables: 2 steering wheel control wires and 1 steering wheel GND wire. Please connect these 3 wires to our 3 steering wheel control wires which are on the red steering wheel control plug. You can see that these 2 green wires are steering wheel control wires, and the white wire is steering wheel GND wire. After you connect these 3 wires well, your original car’s steering wheel buttons will work perfectly.

Please note: the following wiring diagram is provided for your reference.

2005-2013 Alfa Romeo 147 car stereo DVD player
2005-2013 Alfa Romeo 147 car stereo DVD player

 

Above is about how to solve the steering wheel control connection problem. If you still have any problems, you can turn to a professional for help.

Anyway, before the installation, please be 100% sure that you have a stereo which can work well with your car. If you don’t have a car stereo for your car, I’d like to recommend one from Seicane for you.

http://www.seicane.com/alfa-romeo-147-dvd-player-with-gps-navigation-radio-bluetooth-ipod-srd-8805

With intelligent WinCE6.0 operation system and the newest 800MHz ARM11 processor, this Seicane stereo is specially built for Alfa Romeo 147 of year from 2005 to 2013.

There are a wide range of attractive features being supported by this 2005-2013 Alfa Romeo 147 car stereo which can meet your various needs in car, including 3D GPS, Bluetooth hands-free calls, Bluetooth music, FM/AM radio, RDS, Aux in, iPod, etc.

What are you waiting for? Just install this 2005-2013 Alfa Romeo 147 car stereo in your car now. This unit will perfectly upgrade your factory radio with both its comprehensive practical and entertainment features.

How to install a 2003-2011 Porsche Cayenne gps dvd car stereo and make it work effectively

Posted on by — No Comments ↓ 4,178 views
2003-2011 Porsche Cayenne gps dvd car stereo after installation

Here comes an advanced 2003-2011 Porsche Cayenne car stereo from Seicane after installation. It is equipped with the stable Android 5.1.1 operation system and the powerful quad-core CPU for you to upgrade your factory radio for your 2003-2011 Porsche Cayenne. Today I would like to show you a detailed 2003-2011 Porsche Cayenne gps dvd car stereo installation guide for your reference and introduce you how to make this stereo normally work if there is no sound coming out from it.

2003-2011 Porsche Cayenne gps dvd car stereo after installation
2003-2011 Porsche Cayenne gps dvd car stereo after installation

Please pay attention to the tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2003-2011 Porsche Cayenne car radio installation guide

1. Pry out the trim piece along the perimeter of the center dashboard with a lever.

Pry out the trim piece along the perimeter of the center dashboard with a lever
Pry out the trim piece along the perimeter of the center dashboard with a lever

2. Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation.

Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation
Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation

3. Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily.

Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily
Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily

4. Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray.

Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray
Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray

5. Press the tab (green arrow) on the antenna lead and pull it out of the stereo.

Press the tab (green arrow) on the antenna lead and pull it out of the stereo
Press the tab (green arrow) on the antenna lead and pull it out of the stereo

6. Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle’s different years.

Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle's different years
Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle’s different years

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio’s plugs. And put the new Seicane car radio back into the dash.

10. Install two screws and trim piece.

11. Turn on the new car radio and have a comprehensive test.

 

Before or during the installation, if you have any questions, you can turn to a professional for help. Besides, if you are interested in this intelligent 2003-2011 Porsche Cayenne gps dvd car stereo from Seicane, please check out the following link:

http://www.seicane.com/seicane-s127014-quad-core-android-in-dash-car-dvd-gps-system-for-2003-2011-porsche-cayenne-with-am-fm-radio-bluetooth-music-mirror-link-obd2-3g-wifi-hd-1024-600-multi-touch-capacitive-screen

This amazing 2003-2011 Porsche Cayenne gps dvd car stereo is integrated with a wide range of features to meet almost all your needs in car, which mainly includes GPS navigation, Bluetooth connectivity, DVD player, radio tuner, USB/SD connection, etc. Apart from these basic features, there are also some optional features that can be added to this unit according to your preference, such as backup camera, OBD2, DAB and so on.

Just install this powerful 2003-2011 Porsche Cayenne gps dvd car stereo in your beloved car and you will embrace a more wonderful driving experience than ever before.

A Guide of How to Install a 2007-2010 Ford Expedition Stereo Carplay Radio Navigation System Easily

Posted on by — No Comments ↓ 14,108 views
2007-2010 Ford Expedition Stereo after installation

Nowadays, more and more people prefer to use Carplay on their drive way. According to the new statistics, the number of car radio with Carplay owner has been increased to more than 40 million this year. However, some people may still wonder how to install it correctly .Thus it is important to get the right skills of installation. Suppose you are are the owner of 2007-2010 Ford Expedition, what will you do when you start to upgrade your new car radio system? Here are some steps that can help you to finish these complex procedures.

 

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

2007-2010 Ford Expedition head unit installation instruction

Step 1: Remove the trim around gear shifter.

Remove the trim around gear shifter
Remove the trim around gear shifter

Step 2: Remove screws securing center console lid with a screwdriver.

Remove screws securing center console lid with a screwdriver
Remove screws securing center console lid with a screwdriver

Step 3: Remove the center console trim.

Remove the center console trim
Remove the center console trim

Step 4: Remove console side panels on both driver and passenger sides.

Remove console side panels on both driver and passenger sides
Remove console side panels on both driver and passenger sides

Step 5: Remove bolts securing radio bezel and AC controls.

Remove bolts securing radio bezel and AC controls
Remove bolts securing radio bezel and AC controls

Step 6: Unplug AC controls (from passenger side).

Unplug AC controls
Unplug AC controls

Step 7: Remove the radio bezel and AC controls.

Remove the radio bezel and AC controls
Remove the radio bezel and AC controls

Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.

Remove screws securing radio to the vehicle, and take the original radio out of the dash
Remove screws securing radio to the vehicle, and take the original radio out of the dash

Step 9: Check all the accessories for the new Seicane stereo.

Check all the accessories for the new Seicane stereo
Check all the accessories for the new Seicane stereo

Step 10: Connect the harnesses to the back of the new Seicane stereo.

Connect the harnesses to the back of the new Seicane stereo
Connect the harnesses to the back of the new Seicane stereo

Step 11: Connect the Seicane stereo to your original car radio’s plugs, and put the new Seicane stereo into the dash.

Step 12: Turn on the new Seicane stereo and check whether the radio is working properly.

Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

 

By now you should have some idea of what is involved in removing and installing a new car stereo in a 2007-2010 Ford Expedition. If you have questions during this process, you can ask your dealer or professional for help. Still find it too hard and not sure what to go with? Please go to a car stereo upgrade center directly to have the radio installed by a mechanic.  

This 2007-2010 Ford Expedition car stereo is running on the latest Android 11.0 and a powerful RK3188 1.5 GHz Cortex A9 8-core processor, which can provide fast response and a stable operation for you.

With ringtones and voice coming out from the car speakers, you can dial, answer, reject and mute calls without taking your hands off the steering wheel. Its phonebook function enables you to search for contacts directly on the big screen of the head unit. The capability to stream your favorite tunes from the Smartphone wirelessly is also desirable. An internal microphone is included for distortion-free talking.

Not only can it provide multifunctional options including backup camera, radio tuner,high speed 4G&wifi internet, but also it supports multi-touch screen with smooth operation, high sensitively and abundant interaction for the better view of your road ahead.

You can buy this fantastic Android car radio system on Seicane official.

How to Upgrade a 2004-2009 VW Volkswagen GOLF Stereo Pure Sound System with Audio Navigation

Posted on by — No Comments ↓ 5,430 views
2004-2009 VW Volkswagen GOLF Stereo Pure Sound System after installation

Nowadays, it needn’t cost you too much money on purchasing a car, so the car has become an ordinary transportation when people go out. As people spend more and more time in their cars, most of them are very keen on creating a more convenient, comfortable and relaxing in-car environment as well as pursuing a wonderful driving experience. Thus car owners will usually replace their factory radios with new aftermarket stereos to achieve these goals. If you own a 2004-2009 VW Volkswagen GOLF, you can take the following installation instruction for a 2004-2009 VW Volkswagen GOLF car stereo.

2004-2009 VW Volkswagen GOLF Stereo Pure Sound System after installation
2004-2009 VW Volkswagen GOLF Stereo Pure Sound System after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004-2009 VW Volkswagen GOLF car stereo installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Prepare four removal keys.

Prepare four removal keys
Prepare four removal keys

3. There are four removal slots in this radio. Insert the removal keys in the holes of the radio.

There are four removal slots in this radio. Insert the removal keys in the holes of the radio
There are four removal slots in this radio. Insert the removal keys in the holes of the radio

4. Pull outwards to release the radio.

Pull outwards to release the radio
Pull outwards to release the radio

5. Remove the four removal keys from the radio.

6. Disconnect the connectors and cables at the back of the radio.

7. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo
Check all the accessories for the new Seicane car stereo

8. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo
Connect the harnesses to the back of the new Seicane car stereo

9. Connect the Seicane car stereo to your original radio’s plugs.

10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car stereo into the dash.

12. Put everything into their original place. All the installation is done.

 

The above is the basic instruction for a 2004-2009 VW Volkswagen GOLF Stereo Pure Sound System removal and installation. Most car radios are with the same guide and there may be little difference at some point, but it will not have much influence on the whole process. Before and during the installation, if you meet any difficulties, you can contact with your dealer for a wiring diagram, seek help from an experienced person or a professional. If you have no ideas about selecting a car stereo, you can check out the link below which is a great 2004-2009 VW Volkswagen GOLF car stereo from Seicane.

http://www.seicane.com/seicane-s127648-2004-2009-vw-volkswagen-golf-pure-android-autoradio-gps-in-car-dvd-system-with-3g-wifi-mirror-link-obd2-bluetooth-steering-wheel-control-aux-rearview-camera

Upgraded to pure Android 5.1.1 operation system and has a high quality RK3188 1.6 GHz Cortex A9 Quad-core processor, this car stereo runs faster than ever because of its better performance. A 7inch HD multi-touch screen with 1024*600 resolution enables you to enjoy the amazing display effect of videos, TV programs, movies, etc as well as have a perfect view of the road ahead. With wifi built in and 3g internet supported, you can freely get access to convenient e-life anytime and anywhere for online entertainment such as video, TV, movie, music, radio and online communication including Skype, MSN, YouTube, twitter and other services. Don’t hesitate to take it right now and wish you embrace an unforgettable driving experience.

Clever Method on a 2009-2013 HONDA PILOT Radio Removal and Installation with An Aftermarket Audio Sound System

Posted on by — 22 Comments ↓ 33,638 views

To keep your passengers relaxed in the back seats of your car, it is necessary for you to upgrade your factory radio by installing a new aftermarket stereo which is equipped with a lot of practical and entertainment features. If you own a 2009-2013 HONDA PILOT, and plan to upgrade your factory radio, you can read the following related installation steps to help with your installation.

2009-2013 HONDA PILOT car radio after installation
2009-2013 HONDA PILOT car radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009-2013 HONDA PILOT car stereo installation steps

1. The original car radio.

The original car radio

2. Start by moving shift lever into lower position.

Start by moving shift lever into lower position

3. Using your pry tool, carefully pry loose left dash panel and slide over shifter. Then use the pry tool to remove the right panel.

Using your pry tool, carefully pry loose left dash panel and slide over shifter. Then use the pry tool to remove the right panel
3-1

3-1
3-2

4. Using a Philip head screwdriver to unscrew screws that fix the pocket and then remove it.

Using a Philip head screwdriver to unscrew screws that fix the pocket and then remove it

5. Unscrews four screws that are holding the radio and then take out the radio.

Unscrews four screws that are holding the radio and then take out the radio

6. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

7. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

8. Connect the Seicane car stereo to your original stereo’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

 

Before the installation, please make clear every step. If you have any doubts, you can consult your dealer or ask someone experienced to help you. But if you still think it hard to finish the installation by yourself, you’d better go to a car stereo upgrade center to arrange a technician to install the stereo. Anyway, first of all, please check whether your new car stereo is compatible with your car or not. If not, here I would like to share a 2009-2013 HONDA PILOT gps navi dvd car stereo from Seicane with you. Please click:

http://www.seicane.com/7-inch-1024-600-touch-screen-2009-2013-honda-pilot-android-4-4-gps-navigation-system-with-3-g-wifi-bluetooth-tpms-dvr-obdii-rear-camera-aux-steering-wheel-control-mirror-link-1080p-quad-core-cpu-s083706

This Seicane 2009-2013 HONDA PILOT car stereo is based on the Pure Android 6.0 operation system and a R16 1.6 GHz Quad-core CPU, so you are able to embrace a brand new smoother and faster operation experience than ever. Even though you don’t have a good sense of direction, you are capable of finding the best way to get to your destinations with the help of the powerful 3D GPS navigation system in high precision. What’s more, with the help of the wireless Bluetooth technology, hands-free calls and Bluetooth music are both available if you connect your Bluetooth-enabled cell phone with this unit. If you like this car stereo, don’t forget to add it to your cart. Good luck to you!

How to Upgrade a 2007-2011 Toyota CAMRY Head Unit with GPS Navigation Sound System Wisely

Posted on by — 6 Comments ↓ 21,573 views
2007-2011 Toyota CAMRY Head Unit after installation

The image shown below is a Seicane 2007-2011 Toyota CAMRY head unit after installation. This head unit comes with a variety of practical and entertainment features, which can meet almost all your different needs in car. If you own a 2007-2011 Toyota CAMRY, and plan to upgrade your factory radio with a new head unit to improve your in-car environment and driving experience, you can take the following installation guide as a reference to help with your upgrade.

2007-2011 Toyota CAMRY Head Unit after installation
2007-2011 Toyota CAMRY Head Unit after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007-2011 Toyota CAMRY head unit installation guide

1. The original car radio.

The original car radio
The original car radio

2. Make sure that your car engages the parking brake.

3. Rotate the shift lever knob counterclockwise.

Rotate the shift lever knob counterclockwise
Rotate the shift lever knob counterclockwise

4. Grab and remove the two side panels.

Grab and remove the two side panels
Grab and remove the two side panels

5. Remove the panel around the shift lever and then unplug the connector at the backside.

Remove the panel around the shift lever and then unplug the connector at the backside
Remove the panel around the shift lever and then unplug the connector at the backside

5-1
5-1

5-2
5-2

6. Remove the plastic part shown in the following picture and then unplug the connector at the backside.

Remove the plastic part shown in the following picture and then unplug the connector at the backside
Remove the plastic part shown in the following picture and then unplug the connector at the backside

7. Unscrew two screws that are holding the pocket.

Unscrew two screws that are holding the pocket
Unscrew two screws that are holding the pocket

7-1
7-1

8. Take out the pocket and disconnect the connectors at the back of it.

Take out the pocket and disconnect the connectors at the back of it
Take out the pocket and disconnect the connectors at the back of it

8-1
8-1

8-2
8-2

9. Use a removal tool to pry the air vent and then remove it.

Use a removal tool to pry the air vent and then remove it
Use a removal tool to pry the air vent and then remove it

9-1
9-1

10. There are two top screws and two bottom screws fix the radio on the dashboard. Remove them with a screwdriver.

There are two top screws and two bottom screws fix the radio on the dashboard. Remove them with a screwdriver
There are two top screws and two bottom screws fix the radio on the dashboard. Remove them with a screwdriver

10-1
10-1

11. Take out the original car radio gently.

Take out the original car radio gently
Take out the original car radio gently

12. Disconnect the connectors and cables at the back of the radio.

13. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit
Check all the accessories for the new Seicane head unit

14. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane head unit
Connect the harnesses to the back of the new Seicane head unit

15. Connect the Seicane head unit to your original stereo’s plugs.

16. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane head unit into the dash.

18. Put everything into their original place.

 

Wish you can learn something from the above installation guide. Before the installation, please make clear every step. If you have any questions, you can seek advice from your dealer or ask a professional for help. Besides, you can also go straightly to a head unit upgrade centre to install you head unit. Anyway, first of all, please check the compatibility between your new head unit and your car. If you don’t have any ideas about it, you can refer to the following link which is about a great 2007-2011 Toyota CAMRY bluetooth gps dvd head unit from Seicane, please click:

http://www.seicane.com/9-inch-oem-android-radio-capacitive-touch-screen-for-2007-2011-toyota-camry-support-3g-wifi-bluetooth-gps-navigation-system-tpms-dvr-obd-ii-aux-headrest-monitor-control-video-rear-camera-usb-sd-s082706

This Seicane 2007-2011 Toyota CAMRY head unit, equipped with both upgraded features and new functions, is ideal for you to replace your factory radio.

Featured with the high-end 3D GPS navigation system, this head unit can guide you to wherever you want to go through turn-by-turn directions and voice prompts. And the Bluetooth technology which enables you to dial, receive or reject as well as enjoy streaming music is also supported in this head unit to bring safety, convenience and enjoyment for you. Just enjoy your driving with this head unit installed in your car. Good luck to you!

How to Upgrade a 2015 2016 Mercedes-Benz SMART Car Sound System with Touch Screen Radio Navigation

Posted on by — 4 Comments ↓ 5,973 views
2015 2016 Mercedes-Benz SMART Car Sound System after installation

Nowadays, it won’t cost much money to replace a factory radio, so more and more car owners tend to replace the factory radio with a new one. If you are fed up with your factory radio due to its single function, you can easily upgrade it which help you not only gain a better driving experience but also catch up with the trend. Here comes a step-by-step 2015 2016 Mercedes-Benz SMART Car Sound System installation guide from Seicane for your reference to help with the installation.

2015 2016 Mercedes-Benz SMART Car Sound System after installation
2015 2016 Mercedes-Benz SMART Car Sound System after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2015 2016 Mercedes-Benz SMART car radio installation guide

1. Remove the decoration trim strips both on the left side and right side of the radio.

Remove the decoration trim strips both on the left side and right side of the radio
Remove the decoration trim strips both on the left side and right side of the radio

1-1
1-1

1-2
1-2

2. Use a plastic removal tool to pry the gap.

Use a plastic removal tool to pry the gap
Use a plastic removal tool to pry the gap

2-1
2-1

2-2
2-2

3. Gently take out the original radio.

Gently take out the original radio
Gently take out the original radio

3-1
3-1

4. Unplug the connectors and cables at the back of the radio.

5. Check all the accessories for the new Seicane car radio.

6. Connect the harnesses to the back of the new Seicane car radio.

7. Connect the Seicane car radio to your original stereo’s plugs.

8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car radio into the dash.

10. Put everything into their original place. All the installation is done.

 

Wish you can gain something useful from the above car radio installation guide. If you have any doubts, you can seek help from your dealer or a professional. Besides, before the installation, it is fairly necessary for you to check the compatibility of your new car radio. If the radio is not suitable enough, you can refer to this modern 2015 2016 Mercedes-Benz SMART Car Sound System from Seicane. Here is the link, please click:

http://www.seicane.com/9-inch-oem-android-radio-capacitive-touch-screen-for-2015-2016-mercedes-benz-smart-support-3g-wifi-bluetooth-gps-navigation-system-tpms-dvr-obd-ii-aux-headrest-monitor-control-video-rear-camera-usb-sd-s082651

Specially designed for 2015 2016 Mercedes-Benz SMART, this great car radio comes with a variety of functions and features to help you gain a better driving experience, which include 3D GPS navigation system, DVD player, Bluetooth technology, Backup camera, Wi-Fi, etc. Because of these practical functions and entertainment features, almost all your different needs can be satisfied by this multifunctional radio. Take the 3D GPS navigation system as an example. Under the guidance of the turn-by-turn directions and voice prompts provided by the GPS function, you can easily reach your destinations while enjoying your favorite music at the same time along the way. Don’t hesitate to install it in your beloved car and wish you enjoy your driving!

How to Install a 2013 2014 2015 Suzuki S-Cross Stereo Audio with Bluetooth CD GPS Navigation

Posted on by — 2 Comments ↓ 3,963 views
2013 2014 2015 Suzuki S-Cross Stereo Audio after installation

If you’re going to replace your factory radio with a new aftermarket car stereo but worry about the complicated installation, you can feel relieved now as the installation of a car stereo is actually not difficult. With a correct installation guide, you can also try to install the car stereo on your own. Today I would like to introduce an easy-to-understand installation instruction for a car stereo, and if you have the same or similar dashboard, you can read this 2013 2014 2015 Suzuki S-Cross car stereo installation instruction carefully.

2013 2014 2015 Suzuki S-Cross Stereo Audio after installation
2013 2014 2015 Suzuki S-Cross Stereo Audio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2013 2014 2015 Suzuki S-Cross car stereo installation instruction

1. Pry the indicator light with a plastic knife and disconnect the connector at the back of it.

Pry the indicator light with a plastic knife and disconnect the connector at the back of it
Pry the indicator light with a plastic knife and disconnect the connector at the back of it

1-1
1-1

2. Remove the air vent with a plastic removal tool.

Remove the air vent with a plastic removal tool
Remove the air vent with a plastic removal tool

3. Remove two top screws that are holding the radio.

Remove two top screws that are holding the radio
Remove two top screws that are holding the radio

4. Gently take out the original radio.

Gently take out the original radio
Gently take out the original radio

5. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio
Disconnect the connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car stereo.

7. Connect the harnesses to the back of the new Seicane car stereo.

8. Connect the Seicane car stereo to your original stereo’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

 

That’s all about how to remove and install a car stereo for 2013 2014 2015 Suzuki S-Cross. Before you start the work, please make clear every specific step. It’s quite normal if you encounter problems during the process of the installation. In that case, you can seek help from a professional or your dealer. To help you better finish the installation, I’d like to share a 2013 2014 2015 Suzuki S-Cross gps bluetooth car stereo from Seicane with you, please click:

http://www.seicane.com/9-inch-quad-core-android-full-touchscreen-2013-2014-2015-suzuki-s-cross-radio-gps-head-unit-with-bluetooth-wifi-4g-usb-obd2-aux-backup-camera-dvr-steering-wheel-control-s30954

This 2013 2014 2015 Suzuki S-Cross car stereo possesses higher configurations for you to upgrade your factory radio, which include the advanced Android 5.0.1 operation system as well as a powerful R16 1.8GHz A9 Quad-core CPU. Take the practical functions as examples, the 3D built-in GPS navigation system of high accuracy can provide lane assist, 3D street view, landmark display, route planning, voice prompts and turn-by-turn direction for you to find your way to a variety of locations. Besides, you can utilize its built-in Bluetooth to wirelessly pair your enabled mobile phone to make and receive hands-free calls and stream audio to keep safe and enjoyable. Wish you enjoy your trip accompanied by this intelligent car stereo!

How to Set Up a 2012 2013 2014 Chevy Chevrolet Malibu Bluetooth Radio with Aftermarket Navigation Sound System

Posted on by — No Comments ↓ 10,849 views
2012 2013 2014 Chevy Chevrolet Malibu Bluetooth Radio after installation

First of all, please look at the following image which is a 2012 2013 2014 Chevy Chevrolet Malibu Bluetooth Radio after installation. It looks very good, isn’t it? If you also own a 2012 2013 2014 Chevy Chevrolet Malibu and plan to upgrade your factory radio with a brand new all-in-one car stereo, you can try to remove the factory radio and install a new stereo on your own. Now I’d like to share a 2012 2013 2014 Chevy Chevrolet Malibu Bluetooth Radio installation guide from Seicane for your reference.

2012 2013 2014 Chevy Chevrolet Malibu Bluetooth Radio after installation
2012 2013 2014 Chevy Chevrolet Malibu Bluetooth Radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2012 2013 2014 Chevy Chevrolet Malibu car stereo installation guide

1. Pry the panel around the shift lever with the plastic removal tool.

Pry the panel around the shift lever with the plastic removal tool
Pry the panel around the shift lever with the plastic removal tool

1-1
1-1

2. Remove the surrounded trim panel. Please use a plastic removal tool.

Remove the surrounded trim panel. Please use a plastic removal tool
Remove the surrounded trim panel. Please use a plastic removal tool

2-1
2-1

3. Use a screwdriver to remove all the screws that fixed the AC control and the radio.

Use a screwdriver to remove all the screws that fixed the AC control and the radio
Use a screwdriver to remove all the screws that fixed the AC control and the radio

4. Remove all function control panels and the radio.

5. Unplug the connectors at the back of the stereo.

6. Check all the accessories for the new Seicane car stereo.

7. Connect the harnesses to the back of the new Seicane car stereo.

8. Connect the Seicane car stereo to your original stereo’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

 

Wish the above installation guide can do you some help. If you encounter any questions during the whole process of the installation, you can consult your dealer or seek help from a professional. Besides, before the installation, please confirm whether you have a compatible car stereo or not. If not, you can refer to a 2012 2013 2014 Chevy Chevrolet Malibu Bluetooth Radio from Seicane. Here is the link, please click:

http://www.seicane.com/9-inch-android-2012-2013-2014-chevy-chevrolet-malibu-radio-gps-hd-1024-600-touchscreen-bluetooth-obd2-backup-camera-digital-tv-4g-wifi-steering-wheel-control-mirror-link-s30935

Loaded with a wide range of comprehensive functions, this new aftermarket car stereo is an ideal car stereo to replace your factory radio for 2012 2013 2014 Chevy Chevrolet Malibu. You are able to easily get to anywhere you would like to go under the guidance of the turn-by-turn directions and voice prompts provided by its built-in GPS. And you are able to dial, receive or reject hands-free phone calls as well as enjoy Bluetooth music without keeping your hands off the steering wheel when you connect your enabled mobile phone with this car stereo. Wish you like it and good luck to you!