How to Replace a 2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 Bluetooth GPS Car Stereo with HD Multi-touch Screen DVR Steering Wheel Control

Posted on June 7, 2018 by john — No Comments ↓ 10,753 views

2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 car stereo after installation

Do you yearn for upgrading your factory radio with a new multi-functional car stereo on your own? If you would like to have a try, you just need to remove your original car radio and install a new car radio under the correct installation guide. The following is a 2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 car radio installation guide from Seicane. If you have the same or similar dashboard, you can refer to this guide carefully.

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 Bluetooth GPS Car Stereo Installation Guide

1. The original car radio.

2. Start from the bottom shifter. Remove the shifter and disconnect the connector at the back of it.

3. Remove the center button for the heater control panel.

4. Gently remove the heater control panel.

5. Disconnect the connectors at the back of the heater control panel.

6. Underneath the original car radio, there are four screws, just remove them so as to take out the original car radio.

7. Make the new car stereo clip into the original air vent.

8. Make sure that all connectors and cables are plugged to each other correctly.

For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram.

9. Well put the new car stereo into the dashboard.

10. Plug the connectors to the heater control panel’s interfaces.

11. Place the panel to the original place and fix the screw. And put the shifter back, make sure the connector is connected back as well.

Wish the above installation guide can do some help for you. If you come across any problems, you can seek help from your dealer, communicate with someone experienced or turn to a professional for help. Additionally, if you are afraid of making damage to either your car radio or your car, you can also directly go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. While for the selection of an ideal car radio, if you have no ideas, here I would like to share an amazing 2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 car stereo from Seicane with you. For more details, please click:

https://www.seicane.com/oem-2004-2005-2006-2007-toyota-corolla-radio-gps-navigation-android-stereo-support-audio-system-bluetooth-music-1080p-video-aux-dab-mirror-link-usb-sd-dvrwifi-s32512g

This amazing car stereo can be regarded as one of the best road companions for you since it comes with both practical and entertainment features.

With the guidance of the high-end 3D GPS navigation system, you are able to easily know your current locations and find the best route t o reach your ideal destinations through turn-by-turn directions and voice prompts. Besides, this unit comes with dual zone function which enables you to listen to your favorite music while navigating.

Additionally, under the wireless Bluetooth technology, you are able to get access to Bluetooth hands-free phone calls and Bluetooth streaming music from your mobile phone as long as you connect your Bluetooth-enabled mobile phone to this unit. Therefore, you can gain both convenience and enjoyment thanks to this car stereo.

Don’t hesitate to take this unit right now if you like it.

How to Install and Upgrade a 2014 2015 2016 Subaru Forester Car Radio with Bluetooth GPS Navigation System

Posted on May 31, 2018 by john — 6 Comments ↓ 30,769 views

2014 2015 2016 Subaru Forester Car Radio after installation

How hard is it for a car owner to remove his factory radio so as to install a new car radio? People who would like to enjoy more convenience and enjoyment in car may want to know the answer toward this question. As far as I am concerned, it is not complicated for you to remove your factory radio and install a new car radio under the guidance of a correct car radio installation instruction. The following is a 2014 2015 2016 Subaru Forester car radio installation instruction, which can be taken as your reference if you own the same or similar dashboard and would like to upgrade your factory radio.

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2014 2015 2016 Subaru Forester car radio installation instruction

1. Use a plastic removal tool to pry the trim panel of the original car radio.

2. Disconnect the connectors at the back of the trim panel.

3. Use a screwdriver to unscrew all the screws that are holding the original car radio in the dashboard.

4. Gently take the original car radio out from the dashboard.

5. Disconnect the connectors and cables at the back of the original car radio.

6. Make the original car’s connector plug to the new car radio’s power connector. And Make sure the rest of connectors and cables are plugged to the radio’s right interfaces.

Make the original car's connector plug to the new car radio's power connector. And Make sure the rest of connectors and cables are plugged to the radio's right interfaces — Make the original car’s connector plug to the new car radio’s power connector. And Make sure the rest of connectors and cables are plugged to the radio’s right interfaces

7. For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram.

8. Make the connector plug to the back of the trim panel of the new car radio.

9. Carefully place the new car radio in the dashboard.

10. Put everything into their original place. All the installation is done.

Wish the above installation instruction is helpful for you to some extent. If you encounter any difficulties and don’t know how to overcome them, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or for avoiding damage to either your car radio or your car, you can directly go to a car radio upgrade center so as to get the new car radio installed by a professional technician. Anyway, first of all, you have to pick an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is a great 2014 2015 2016 Subaru Forester car radio from Seicane.

https://www.seicane.com/android-hd-touchscreen-in-dash-radio-for-2014-2015-2016-subaru-forester-gps-navigation-bluetooth-music-usb-audio-system-support-backup-camera-digital-tv-1080p-video-dvr-steering-wheel-control-s169208g

This car radio is running on the most advanced and stable Android 8.0 operation system and a 8-core 1.5 GHz RK-PX5 A53 processor to enhance its capacities and performance. So this car radio can be regarded as one of the best replacements for your factory car radio.

With this car radio installed in your car, you can get access to the high-end 3D GPS navigation system, Bluetooth function,and other functions. Under the guidance of the turn-by-turn directions and voice prompts provided by the worldwide real-time GPS navigation system, you can easily locate where you are and gain the most suitable route option to reach your desired destinations. And thanks to this unit’s dual zone function, you can freely listen to your favorite music while navigating.

Additionally, without keeping your hands off the steering wheel, Bluetooth hands-free phone calls and Bluetooth streaming music are available for you as long as you connect your Bluetooth-enabled mobile phone and this car radio.

What are you waiting for? If you like this unit, you can add this unit to your shopping cart!

The Quick Tutorial to Install a Universal Toyota Nissan KIA GPS Bluetooth Car Radio

Posted on May 25, 2018 by john — No Comments ↓ 2,694 views

Universal Toyota Nissan KIA car radio after installation

With the rapid development of technology, nowadays more and more car owners tend to remove their outdated factory radio and install a new multifunctional car radio to enhance their car’s capabilities so as to upgrade their in-car life. If you also want to upgrade your in-car life, you can consider replacing your factory radio with a brand new multifunctional car radio. The following is an easy-to-understand Universal Toyota Nissan KIA car radio installation guide from Seicane, which can be taken as your reference if you own the same or similar dashboard.

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

Universal Toyota Nissan KIA car radio installation guide

1. The original car radio.

2. Prepare a flat plastic removal tool and use it to pry the air vent.

3. Gently remove the air vent and put it aside.

4. Use a screwdriver to remove the four screws that are holding the car radio.

5. Gently pull the original car radio out from the original car radio.

6. Disconnect all the connectors and cables at the back of the original car radio.

7. Remove the original car radio fascia since you will use it later.

8. Make the new car radio and the original fascia get together.

9. Make the original car’s connector plug to the new car radio’s power connector. And Make sure the rest of connectors and cables are plugged to the radio’s right interfaces.

10. For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram.

11. Carefully place the new car radio, tighten the screws that hold the car radio with a screwdriver.

12. Put everything into their original place. All the installation is done.

Wish the above installation guide can be helpful for you to some extent. If you have any doubts, please feel free to contact your dealer, communicates with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician from a car radio upgrade center to help you install the new car radio. Anyway, it is essential for you to select an ideal car radio first of all. If you have no ideas, you can refer to the following link which is a remarkable Universal Toyota Nissan KIA car radio from Seicane. For more details, please click:

https://www.seicane.com/android-universal-aftermarket-autoradio-gps-car-a-v-system-with-dvd-player-radio-rds-bluetooth-mirror-link-obd2-touch-screen-3g-wifi-steering-wheel-control-s6938g

This car radio is integrated with a wide range of comprehensive features to meet your different needs in your car, which mainly include 3D GPS navigation system, FM/AM radio tuner, Bluetooth hands-free phone calls, Bluetooth streaming music, AUX, steering wheel control, USB/SD card connection, file management, etc.

With this car radio installed in your car, under the guidance of the worldwide real-time GPS navigation system, you are able to easily know your current locations and navigate to your desired destinations through the turn-by-turn directions and voice prompts. Besides, thanks to this unit’s dual zone function, you can also listen to your favorite music while navigating, and the music will automatically switch to GPS voice.

Besides, under the wireless Bluetooth technology, this car radio enables you to pair your Bluetooth-enabled mobile phone with this car radio, so you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as freely listen to your favorite music streaming from your phone music playlists, which can add a lot of convenience and enjoyment to your journey.

What are you waiting for? If you like this unit, just add it to your shopping cart right now!

The Effective Way on Replacing a 2013 2014 2015 Hyundai IX45 GPS Bluetooth DVD Car Radio

Posted on May 18, 2018 by john — No Comments ↓ 3,341 views

2013 2014 2015 Hyundai IX45 GPS Bluetooth DVD Car Radio after installation

It goes without saying that an ideal car radio can provide you with great convenience and enjoyment for car owners all the way. And thanks to special wiring harness, actually the installation of a car radio is not complicated. Therefore, with some related installation experience and a correct installation instruction, you can also easily try to finish the whole installation on your own. The following is a 2013 2014 2015 Hyundai IX45 car radio installation guide from Seicane. If you own the same or similar dashboard, you can refer to this guide carefully.

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2013 2014 2015 Hyundai IX45 car radio installation guide

1. The original car radio.

2. Pry two air vents on each side with a plastic removal tool and remove them.

3. Remove four screws that are holding the radio on the dashboard.

4. Pull out the original radio.

5. Disconnect the connectors and cables at the back of the radio.

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

Wish the above installation steps can be helpful for you. If you have any doubts about your car radio or your car, you can seek help from your dealer, someone experienced or a professional. To avoid making damage to either your car radio or your car, you can straightly arrange a professional technician to help install the new car radio. While for selecting an ideal car radio, if you have no ideas, here I would like to share a remarkable 2013 2014 2015 Hyundai IX45 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/inch-android-radio-for-2013-2014-2015-hyundai-ix45-gps-navigation-system-with-touchscreen-bluetooth-rearview-camera-1080p-steering-wheel-control-3g-wifi-obd2-dvr-s32798g

This car radio’s operation system has been upgraded to the most advanced and stable Android 8.0 operation system and a powerful 8-core CPU processor as well as 32GB ROM and 4GB RAM. Besides, this unit comes with a lot of practical and entertainment features to meet your different needs in your car, thus, it can be regarded as one of the best replacements for your factory radio.

With this car radio installed in your car, you can get access to a wide range of practical and entertainment features, mainly including GPS navigation system, Bluetooth hands-free phone calls, Bluetooth streaming music, FM/AM radio tuner, file management, USB/SD connection, etc.

Under the assistance of the worldwide real-time GPS navigation system, you can easily and quickly know your current locations and accurately guide to your desired destinations according to turn-by-turn directions and voice prompts. Additionally, you can also freely enjoy your favorite music while navigating thanks to this car radio’s dual zone function.

If you like this unit, just add it to your shopping cart right now. Good luck!

How to remove a 2009 2010 2011 2012-2013 SUBARU OUTBACK Factory Radio to Install a New Aftermarket Stereo with GPS Navigation Bluetooth Radio

Posted on May 15, 2018 by john — 2 Comments ↓ 14,723 views

2009 2010 2011 2012-2013 SUBARU OUTBACK Car Radio after installation

Nowadays, more and more car owners who spend a lot of time in cars are trying to replace the factory radio with a new aftermarket car stereo for they want to create a more convenient, comfortable and relaxing car environment as well as a more wonderful driving experience. If you are one of them, you can try to install the new stereo under the guidance of a correct instruction. Today I’d like to share a 2009 2010 2011 2012-2013 SUBARU OUTBACK car radio installation instruction with you. If you have the same dashboard, you might refer to it when you are going to have the car radio replacement.

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009 2010 2011 2012-2013 SUBARU OUTBACK car radio installation instruction

1. The original car radio.

2. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

3. Remove six screws that fixed the radio on the dashboard.

4. Gently pull the factory radio out of the dash.

5. Then unplug the connectors at the back of the factory radio.

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

Don’t be over worried if you encounter any problems during the installation. To solve these problems, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to select an ideal car radio. If you have no ideas, you can refer to the following link which is a remarkable 2009 2010 2011 2012-2013 SUBARU OUTBACK car radio from Seicane.

https://www.seicane.com/oem-2009-2013-subaru-outback-android-radio-dvd-player-gps-navigation-system-with-steering-wheel-control-bluetooth-wifi-backup-camera-obd2-dvr-dab-s32780g

This amazing car radio is upgraded to the most stable and latest Android 8.0 operation system and a strong 8-core Cortex A53 CPU processor to enhance its higher configuration and better performance.

Thanks to the built-in Bluetooth module, you can easily make this car radio sync with your Bluetooth-enabled mobile phone, so you can freely dial, receive, reject and mute Bluetooth hands-free phone calls as well as enjoy Bluetooth streaming music from phone play lists.

Additionally, under the guidance of the turn-by-turn direction and voice prompts provided by the 3DGPS navigation system of high accuracy, you are able to easily know your current locations and find the right way to reach your desired destinations. And this unit comes with dual zone function, which enables you to listen to your favorite music while navigating.

Wish you like this unit and good luck to you!

The Specific Instruction to Upgrade a 2009 2010 2011 2012-2015 Hyundai IX35 Car Radio Audio with Autoradio DVD Player Head Unit

Posted on May 11, 2018 by john — 9 Comments ↓ 8,895 views

2009 2010 2011 2012-2015 Hyundai IX35 Car Radio after installation

If you think your factory radio is not featured enough, why not consider replacing it with a brand new multifunctional car radio? With an ideal car radio installed in you car, you can get access to a wide range of practical and entertainment features, which can bring you both great convenience and enjoyment. So don’t hesitate to replace your factory radio if you think it too outdated to satisfy most of your needs in car. The following is a 2009 2010 2011 2012-2015 Hyundai IX35 car radio installation instruction from Seicane, which can be taken as a reference for you.

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. So each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009 2010 2011 2012-2015 Hyundai IX35 car radio installation instruction

1. The original car radio.

2. Use a plastic removal tool to remove the cover panel.

3. Unscrew two top screws fixed the radio on the dashboard.

4. Remove the air conditioning panel with a plastic removal tool and then disconnect the connectors at the back.

5. Remove another two screws that fixed the radio on the dashboard.

6. Take out the original radio.

7. Disconnect the connectors and cables at the back of the radio.

8. Check all the accessories for the new Seicane car radio.

9. Connect the harnesses to the back of the new Seicane car radio.

10. Connect the Seicane car radio to your original stereo’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place. All the installation is done.

That’s all about how to install a 2009 2010 2011 2012-2015 Hyundai IX35 car radio. If you have any doubts, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for hep. Or you can directly arrange a professional technician to help you install the new car radio. Anyway, before installation, please confirm that you’ve got an ideal car radio. If not, you can refer to the following link which is a remarkable 2009 2010 2011 2012-2015 Hyundai IX35 car radio from Seicane. For more details, please click:

https://www.seicane.com/android-2009-2015-hyundai-ix35-gps-navigation-system-with-hd-touchscreen-mirror-link-bluetooth-obd2-dvr-rearview-camera-1080p-steering-wheel-control-3g-wifi-s32735g

This car radio is running on the most advanced and stable Android 8.0 operation, a powerful 8-core CPU processor and 32GB ROM as well as 4GB RAM to provide you with smoother, faster and easier operation experience.

With this amazing car radio installed in your car, you can freely get access to a lot of practical and entertainment features, including 3D navigation, FM/AM radio, Bluetooth hands-free phone calls, Bluetooth streaming music, file management, SD card/USB connection, etc.

Under the guidance of the turn-by-turn directions and voice prompts provided by the GPS navigation system of high accuracy, you can easily locate where you are and navigate to any locations you would like to go to. And you can also listen to your favorite music while navigating thanks to this car radio’s dual zone function.

Moreover, without taking your hands off the steering wheel and your eyes off the road ahead, you can pair your Bluetooth-enabled mobile phone and this unit under the wireless Bluetooth technology so as to dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone music play lists.

What are you waiting for? If you like this unit, just add it to your shopping cart right now!

The Easy-to-understand Steps on Installing a 2008 2009 2010 2011-2013 VW Volkswagen GPS Bluetooth Car Radio with Steering Wheel Control WiFi

Posted on May 3, 2018 by john — No Comments ↓ 2,946 views

2008 2009 2010 2011-2013 VW Volkswagen GPS Bluetooth Car Radio after installation

It goes without saying that an all-in-one car stereo can be regarded as the most significant part of a car since it comes with a wide range of practical and entertainment features, mainly including 3D GPS function, Bluetooth function, DVD player, FM/AM radio tuner, etc. If you are plan to replace your factory radio with a multifunctional car radio, you can go to a car radio upgrade center or ask a professional to install it in your car. Anyway, you can find an installation instruction to help you have a general understanding of the installation. The following is a 2008 2009 2010 2011-2013 VW Volkswagen car radio installation instruction from Seicane I would like to share with you.

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008 2009 2010 2011-2013 VW Volkswagen car radio installation instruction

1. The original car radio.

2. On the top of the air vent, you will see a top cover. Get underneath it and slide it out.

3. After you slide out the top cover, you will see two screws.

4. Unscrew these two screws with a screwdriver and remove the top piece.

5. Gently pull out the air vent and disconnect the connectors carefully. Please use a trim removal tool if necessary.

6. Use a screwdriver to remove the two screws on the top corner of the original car radio.

7. Pry the car radio frame by a flat removal tool and then remove the frame.

8. Unscrew the four screws that holds the original car radio.

9. Gently take out the original car radio out from the dashboard.

10. Disconnect all the connectors and cables at the back of the original car radio.

11. The original car radio is removed successfully.

12. Plug the power connector the original car’s socket. Make sure the lever thing is up first and then push it down.

13. Make sure that the rest of connectors and cables are connected successfully.

14. For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram.

15. Carefully place the new car radio.

16. Tighten the screws that hold the car radio with a screwdriver.

17. Put everything into their original place. All the installation is done.

18. The new Seicane car radio after installation.

Above is the whole removal and installation process of a 2008 2009 2010 2011-2013 VW Volkswagen car radio. If you meet any difficulties and don’t know how to overcomes them, you can browse some professional websites for seek advice, contact your dealer or seek help from a professional. Or you can directly go to a car radio upgrade center and ask a professional technician to help you install the new car radio.

Besides, it is very necessary for you to select an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is an excellent 2008 2009 2010 2011-2013 VW Volkswagen car radio from Seicane. For more details, please click:

https://www.seicane.com/android-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-skoda-seat-with-3g-wifi-mirror-link-obd2-bluetooth

This powerful car radio, which is loaded with the pure stable Android 8.0 operation system, 8 – Core 1.5 GHz RK-PX5 A53 processor and 32GB Inland flash as well as 4GB RAM, can be one of your best choices to replace your factory radio in your beloved car.

Under the guidance of the turn-by-turn directions and voice prompts offered by the advanced 3D GPS navigation system of high accuracy, this unit enables you to easily locate where you are currently and help you gain the most route options to arrive at your desired destinations. Additionally, another amazing feature is that this unit comes with dual zone function, so you can also listen to your favorite music while navigating and the music will automatically switch to GPS voice.

What’s more, without keeping your hands off the steering wheel, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you as long as you make your Bluetooth-enabled mobile phone pair with this smart car radio. And by doing so, you can obtain great convenience and enjoyment.

What are you waiting for? If you like this unit, just add it to your shopping cart right now!

How to Skillfully Install a Car Stereo Radio Navigation Unit for 2005 2006 2007 2008-2011 Seat Leon with Steering Wheel Control WiFi

Posted on April 26, 2018 by john — 2 Comments ↓ 10,644 views

2005 2006 2007 2008-2011 Seat Leon Car Radio after installation

Have you ever thought that if you have a very remarkable car radio installed in your car, your new driving life will be totally different from before? An ideal car radio with both practical and entertainment features can greatly bring great convenience and entertainment for its user. If you think your car radio’s functions are too limited, you might as well consider replacing your factory radio with a brand new car radio. This article mainly aims to introduce the installation steps of a 2005 2006 2007 2008-2011 Seat Leon car radio from Seicane. If you own the same vehicle type, you can refer to these steps carefully.

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005 2006 2007 2008-2011 Seat Leon car radio installation steps

1. The original car radio.

2. Insert the removal keys to the original car radio so as to release the original car radio.

3. Gently pull out the original factory radio from the original dashboard.

4. Unplug the connectors and cables at the back of the original car radio.

5. The original factory car radio is removed successfully.

6. Make the original car’s connector plug to the new car radio’s power connector.

7. Make the white connector plug to the CAN BUS decoder.

8. Make sure the rest of connectors and cables are plugged to the radio’s right interfaces.

9. For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram.

10. Use a screwdriver to fix the four screws which hold the car radio.

11. Place the car radio frame at the original position firmly.

12. Seicane car radio after installation.

So now do you have a general understanding of the whole removal and installation steps of a 2005 2006 2007 2008-2011 Seat Leon car radio? If you still feel it hard to install such a car radio by yourself, it is sincerely suggested that you should seek help from your dealer, someone experienced or a professional. Or you can straightly go to a car radio upgrade center and make the new car radio installed by a professional technician. Additionally, if you are still searching online for a suitable car radio and feel interested in the car radio we’ve mentioned, you can check out the following related link for more details.

https://www.seicane.com/android-2005-2011-seat-leon-gps-dvd-player-in-dash-radio-system-with-hd-touch-screen-bluetooth-3g-wifi-mirror-link-obd2-dvr-backup-camera-s6920

This car radio is running on the advanced and stable Android 7.1 operations system and powerful quad-core RK PX3 CPU, and it also has 2GB RAM to enhance its capability and performance.

With this car radio installed in your car, you can easily get access to a lot of practical and entertainment features, such as 3D GPS function, FM/AM radio tuner, Bluetooth hands-free phone calls, Bluetooth streaming music, file management, USB connection,etc.

About the 3D GPS navigation function, what you cannot ignore is that with its assistance, you will know your current position easily and quickly, and will be guide to the correct destinations by turn-by-turn direction and voice prompts.

You don’t have to worry about that your car’s original camera can not work after install this unit since it can totally support it. Besides, this unit can both support 3G and 4G Net, which enables you to freely surf on the internet in your beloved car. And one of the highlight is that this unit also support carplay, so you can freely enjoy your smartphone carplay function in your car if you get it installed and has a carplay USB dongle in your car.

If you like this unit, then don’t hesitate to take it home. You will get more surprise.

How to Remove a 2013 2014 2015 Suzuki S-Cross SX4 Car Radio to Install a Touch Screen Radio Stereo Navigation System

Posted on April 20, 2018 by john — 2 Comments ↓ 3,767 views

2013 2014 2015 Suzuki S-Cross SX4 Car Radio after installation

In order to gain a wonderful and relaxing driving experience, you can consider removing your factory radio and install a new aftermarket car radio. And to reduce some budgets, you can find a related instruction and follow it to try to remove the factory radio and install the new car radio by yourself. The following is a 2013 2014 2015 Suzuki S-Cross SX4 car radio installation guide. If you have the same or similar dashboard, you can refer to the following guide and take it as a reference.

Here are some tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and www.seicane.com make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

2013 2014 2015 Suzuki S-Cross SX4 car radio installation guide

1. Pry the indicator light with a plastic knife and disconnect the connector at the back of it.

Pry the indicator light with a plastic knife and disconnect the connector at the back of itPry the indicator light with a plastic knife and disconnect the connector at the back of it — Pry the indicator light with a plastic knife and disconnect the connector at the back of it

2. Remove the air vent with a plastic removal tool.

3. Remove two top screws that are holding the radio.

4. Gently take out the original radio.

5. Disconnect the connectors and cables at the back of the radio.

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

Now do you have a general understanding of the whole installation process on a 2013 2014 2015 Suzuki S-Cross SX4 car radio? If not, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. Anyway, before installation, please do select an ideal car radio. If you have no ideas, you can refer to the following link which is a remarkable 2013 2014 2015 Suzuki S-Cross SX4 car radio from Seicane.

https://www.seicane.com/inch-2013-2014-2015-suzuki-sx4-cross-android-radio-dvd-gps-navigation-system-with-hd-touch-screen-bluetooth-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-steering-wheel-control-mirror-link-s32536

This car radio is loaded with the most advanced and stable Android 8.0 operation system and a powerful 8-core CPU processor as well as 4GB RAM. Besides, it comes with a wide range of practical and entertainment features to meet your different needs in your car.

After you get this car radio installed in your car, you can make full use of this unit’s built-in GPS navigation system of high accuracy. You can easily locate where you are and navigate to any locations you would like to go to through the turn-by-turn directions and voice prompts.

Besides, as long as you connect your Bluetooth-enabled mobile phone to this unit through Bluetooth connection, you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your mobile phone without taking your hands off the steering wheel.

If you like this unit, just add it to your shopping cart. Good luck!

How to Install a 2003 2004 2005 2006-2010 Porsche Cayenne Car Stereo Audio with Bluetooth GPS Navigation System

Posted on April 12, 2018 by john — 7 Comments ↓ 9,009 views

2003 2004 2005 2006-2010 Porsche Cayenne Car Stereo after installation

It goes without saying that a remarkable car radio can help you gain a much relaxing driving experience. Therefore, more and more car owners would like to replace their factory radio with a new aftermarket car radio so as to get access to a lot of upgraded and brand new features. This article mainly talks about the installation instruction on a 2003 2004 2005 2006-2010 Porsche Cayenne car radio. If you also have the same or similar dashboard, you can refer to the following instruction.

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2003 2004 2005 2006-2010 Porsche Cayenne car radio installation instruction

1. Pry out the trim piece along the perimeter of the center dashboard with a lever.

2. Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation.

3. Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily.

Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily

4. Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray.

5. Press the tab (green arrow) on the antenna lead and pull it out of the stereo.

6. Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle’s different years.

Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle's different years — Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle’s different years

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original car radio’s plugs. And put the new Seicane car radio back into the dash.

10. Install two screws and trim piece.

11. Turn on the new car radio and have a comprehensive test.

Wish the above installation instruction can do you some help. If you have any doubts, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or for avoiding damage to either your car radio or your car, you’d better go to a car radio upgrade center to ask a professional technician to help you install the new car radio.

Anyway, before installation, please make sure you’ve had an ideal car radio. If not, I’d like to recommend an excellent 2003 2004 2005 2006-2010 Porsche Cayenne car radio from Seicane to you. For more details, please click:

https://www.seicane.com/android-2003-2004-2005-2006-2010-porsche-cayenne-gps-navigation-cd-radio-dvd-player-bluetooth-wifi-usb-audio-system-support-dvr-obd2-backup-camera-digital-tv-s6935g

Loaded with the latest and most stable Android 8.0 operation system and a powerful 8-core 1.5 GHz Cortex A53 CPU processor, this car radio can be regarded as one of the best replacement for your factory radio because of its enhance and improved capabilities and performance.

With the guidance of the built-in GPS navigation system of this car radio, you can easily locate where you are and find the right way to reach your desired destinations through turn-by-turn directions and voice prompts. Besides, while navigating, you can also freely listen to your favorite music thanks to this unit’s dual zone function.

Besides, through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can freely dial, answer, reject and mute hands-free calls as well as listen to your favorite music streaming from your phone music playlists, which can add both convenience and enjoyment to your in-car life.

Wish you like this unit and good luck to you!

Car DVD

How to Replace a 2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 Bluetooth GPS Car Stereo with HD Multi-touch Screen DVR Steering Wheel Control

How to Install and Upgrade a 2014 2015 2016 Subaru Forester Car Radio with Bluetooth GPS Navigation System

The Quick Tutorial to Install a Universal Toyota Nissan KIA GPS Bluetooth Car Radio

The Effective Way on Replacing a 2013 2014 2015 Hyundai IX45 GPS Bluetooth DVD Car Radio

How to remove a 2009 2010 2011 2012-2013 SUBARU OUTBACK Factory Radio to Install a New Aftermarket Stereo with GPS Navigation Bluetooth Radio

The Specific Instruction to Upgrade a 2009 2010 2011 2012-2015 Hyundai IX35 Car Radio Audio with Autoradio DVD Player Head Unit

The Easy-to-understand Steps on Installing a 2008 2009 2010 2011-2013 VW Volkswagen GPS Bluetooth Car Radio with Steering Wheel Control WiFi

How to Skillfully Install a Car Stereo Radio Navigation Unit for 2005 2006 2007 2008-2011 Seat Leon with Steering Wheel Control WiFi

How to Remove a 2013 2014 2015 Suzuki S-Cross SX4 Car Radio to Install a Touch Screen Radio Stereo Navigation System

How to Install a 2003 2004 2005 2006-2010 Porsche Cayenne Car Stereo Audio with Bluetooth GPS Navigation System

Categories

Recent Posts

Pages

Recent Comments

Views

Archives

Meta

Blogroll

November 2024
M	T	W	T	F	S	S
« Sep
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30

Categories

Recent Posts

Pages

Recent Comments

Views

Archives

Meta

Blogroll

Tags