How to Remove and Install a 2006-2012 TOYOTA RAV4 Car Radio with Bluetooth GPS Navigation System

Posted on March 31, 2017 by john — No Comments ↓ 20,792 views

2006-2012 TOYOTA RAV4 Car Radio after installation

When driving out, you must want to get to a lot of locations without getting lost and have great entertainment at the same time. In that case, it is necessary for you to install a powerful car radio which is integrated with GPS navigation function and entertainment features. If you are tired of your factory radio and want to replace it, then a detailed removal and installation guide can be helpful for you. The following instruction is about a 2006-2012 TOYOTA RAV4 car radio from Seicane. If you happen yo have the same dashboard, you can take it as a reference.

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006-2012 TOYOTA RAV4 car radio installation instruction

1. The original car radio.

2. Remove the panel by using plastic removal tool.

3. Unplug the hazard warning lights.

4. Remove the left panel and unplug the switch.

5. Unplug the switch.

6. Remove four screws.

a. Position for screws.

7. Pull out the factory radio.

8. The back of the original car radio.

9. Remove 8 screws from original car radio.

10. Remove 2 screws at the top of the new radio.

11. Install 8 screws to new car radio.

12. Plug into factory plugs.

13. All plugs after connection.

14. Check all the accessories for the new Seicane car radio.

15. Connect the harnesses to the back of the new Seicane car radio.

16. Connect the Seicane car radio to your original car radio ‘s plugs.

17. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

18. If the new Seicane car radio works well, put it into the dash.

19. Put everything into their original place, and all the installation is done.

After reading the above installation guide, perhaps now you have a general understanding of the installation on a 2006-2012 TOYOTA RAV4 car radio. If there are any doubts, you are welcome to ask for a wiring diagram from your dealer or seek for professional suggestion from a professional. However, if you don’t know which kind of car stereos can work well in your car, I’d like to recommend a fabulous 2006-2012 TOYOTA RAV4 car radio from Seicane to you. For more information, please click:

http://www.seicane.com/android-aftermarket-head-unit-for-2006-2012-toyota-rav4-with-hd-touchscreen-1024-600-radio-rds-gps-navigation-system-bluetooth-wifi-mirror-link-steering-wheel-control-quad-core-s127106

Loaded with the stable Android 5.1.1 operation system and a high quality RK3188 1.6 GHz Cortex A9 Quad-core processor, this unit’s capabilities and performance can be enhanced to provide you with the best services.

Coming with a 7 inch multi-touch screen with 1024*600 pixels, this unit enables you to enjoy the best display effect when you are watching videos, TV programs and movies. Besides, it can provide you with the perfect view of the road ahead.

What’s more, numerous features are compatible with this unit, including 3D GPS navigation, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth music, CD/DVD player, steering wheel control, USB&SD connection, etc. As long as you take full advantage of these features, you will definitely embrace a brand new driving experience.

Wish you like this unit and good luck to you!

How to Install a 2011 onward Hyundai Accent Blue Car Stereo with Bluetooth GPS System

Posted on March 29, 2017 by john — No Comments ↓ 4,369 views

2011 onward Hyundai Accent Blue Car Stereo after installation

After you get an ideal car stereo, have you considered installing it by yourself? As for the installation, you may worry it may be too complicated. Actually, if you have some related installation experience before, you can follow a correct installation guide to help with the installation. If it is the first time for you to install the stereo, it is highly suggested that you should arrange a technician to help you. A detailed 2011 onward Hyundai Accent Blue car stereo installation instruction is as follow. If you own such a car model, you can refer to it.

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2011 onward Hyundai Accent Blue car stereo installation instruction

1. Pry the edges of the panel with a lever.

2. Remove the panel with your hands.

3. Disconnect the connectors at the back of the panel.

4. Unscrew four screws holding the original radio in place with a screwdriver.

5. Take the original radio out of the dash with your hands.

6. Disconnect the connectors at the back of the original radio.

7. Check all the accessories for the new Seicane car stereo.

8. Connect the harnesses to the back of the new Seicane car stereo.

9. Connect the Seicane car stereo to your original car radio’s plugs.

10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car stereo into the dash.

12. Put everything into their original place.

Don’t worry if you come across some problems during the installation. To solve the problems, there are three kinds of people you can seek for help, including your dealer, someone experienced and a professional.

To help you select an ideal car stereo to fit your car very well, I’d like to recommend a remarkable 2011 onward Hyundai Accent Blue car stereo from Seicane to you. For more details, please click:

http://www.seicane.com/seicane-s127202-16g-2011-onward-hyundai-accent-blue-system-gps-android-autoradio-dvd-aftermarket-oem-with-mirror-link-obd2-3g-wifi-bluetooth-music-rearview-camera-hd-1080p-video

If you install this powerful 2011 onward Hyundai Accent Blue car stereo which is compatible with numerous comprehensive features in your car, your driving experience will be taken up a notch.

With the assistance of the high-end 3D GPS navigation system, you can quickly locate where you are and accurately navigate to your ideal destinations according to turn-by-turn directions and voice prompts.

Hands-free calls and streaming music are both available as long as you realize the connection between your Bluetooth-enabled mobile phone and this car stereo under the wireless Bluetooth technology.

Besides, some optional functions can also be added to this unit, such as car DVR, backup camera, DAB, etc. The backup camera can be added to this unit which can do some help to your parking.

Just remember to add this unit to your shopping cart. Wish you enjoy your driving from now on. Good luck to you!

How to Upgrade a 2008-2014 TOYOTA Sequoia DVD Player with a Multifunctional Car Radio with Touch Screen Bluetooth GPS Navigation System

Posted on March 17, 2017 by john — 2 Comments ↓ 6,818 views

2008-2014 TOYOTA Sequoia DVD Player after installation

Among a lot of ways to enhance the capacity of your car, to replace your old factory radio with a brand new car radio can be the best and most effective way. However, some car owners may regard the installation of a car radio as a very complicated job. But actually with a correct installation guide and some relative experience, you can also try to install a new car stereo on your own. Today I would like to introduce how to remove and install a car radio. If your car model is 2008-2014 TOYOTA Sequoia, you can refer to the following 2008-2014 TOYOTA Sequoia DVD Player installation instruction.

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008-2014 TOYOTA Sequoia car radio installation instruction

1. The original car radio.

2. Pry around the panel on the left of the original car radio with a lever, and release it.

3. Remove the bottom pocket with your hands.

4. Remove the air conditioner control with a lever.

5. Remove four mounting screws holding the original car radio in place with a screwdriver as pictures below show.

6. Take the original car radio out of the dash with your hands.

7. Disconnect all connectors at the back of the original car radio.

8. Check all the accessories for the new Seicane car radio.

9. Connect the harnesses to the back of the new Seicane car radio.

10. Connect the Seicane car radio to your original car radio’s plugs.

11. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12.Put the new Seicane radio into the dash.

13. Put everything into their original place.

That’s the installation steps about installing a 2008-2014 TOYOTA Sequoia DVD Player. If you have any questions, you can contact your dealer, seek advice from a professional or a experienced person. If you still think it hard to finish the whole installation process by yourself, we suggest you arrange a technician to help you install the radio straightly.

Besides, if you are still looking for a suitable car radio for your car, you’re recommended to check out the following link which is a 2008-2014 TOYOTA Sequoia DVD Player from Seicane.

http://www.seicane.com/seicane-s127107-android-2008-2014-toyota-sequoia-dvd-player-gps-radio-car-stereo-with-touch-screen-bluetooth-music-3g-wifi-backup-camera-mirror-link-obd2-steering-wheel-control-usb-sd

Equipped with numerous up-to-date features, this 2008-2014 TOYOTA Sequoia DVD Player can be a suitable replacement for your original radio.

With it installed in your car, the 3D GPS navigation can offer the guidance of turn-by-turn directions and voice prompts, so you can easily know your current locations and arrive at your destinations accurately.

The DVD player functionality allows you to play whatever you like to make both yourself and your passengers since there are a wide range of audio and video formats compatible with this unit, including DVD/DIVX/MP4/MP3/MP2/VCD.

And the Bluetooth pairing functionality enables you to enjoy great convenience and enjoyment brought by hands-free calls and streaming music with paying attention to the road ahead and keep your hands on the steering wheel.

Wish you like this car radio. Good luck to you!

How to Upgrade a 2013-2016 Toyota RAV4 Radio with Touch Screen Speakers Sound System

Posted on March 8, 2017 by john — No Comments ↓ 15,349 views

2013-2016 Toyota RAV4 car radio after installation

Do you have a plan to upgrade your factory radio for a more wonderful driving experience? If you do, you have to select a new car radio firstly. After getting a suitable car radio, you can go to a car radio upgrade center to arrange a technician to install the new radio straightly. Or if you have some installation experience before, you can try to install such a radio on your own under a correct installation guide. The following is a 2013-2016 Toyota RAV4 car radio installation guide from Seicane. If you have the same dashboard, you can refer to it carefully so as to finish your installation successfully.

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2013-2016 Toyota RAV4 car radio installation guide

1. Using an automotive trim tool to remove the upper dashboard trim panel. Set the panel aside once removed.

2. Gently pry the air conditioning vents on the left and right-hand sides of the factory touch screen unit away from the dashboard.

3. Gently pry the clock display and hazard lamp panel away from the dashboard and set it to the side.

4. Remove the four retaining screws attaching the factory touch screen unit to the dashboard.

5. Gently lift the touch screen unit away from the dashboard and lean it forward to gain access to the wiring harnesses on the reverse side.

6. Disconnect the touch screen by unplugging the individual harnesses.

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place.

Wish you can learn some skills to achieve the installation of a 2013-2016 Toyota RAV4 car radio. Don’t worry if you meet some difficulties during the installation. To overcome the difficulties, please feel free to contact your dealer or seek help from a professional technician. Or you can also ask an experienced person to help you alongside during the installation.

Since a car radio matters a lot for the successful installation, you have to choose a suitable car radio for your car first of all. If you don’t have any idea, we suggest you check out the following link which is a 2013-2016 Toyota RAV4 car radio from Seicane. Here comes the link, please click:

http://www.seicane.com/hd-touchscreen-1024-600-car-stereo-for-2013-2016-toyota-rav4-android-radio-gps-navigaion-wifi-am-fm-radio-rds-bluetooth-music-1080p-video-mirror-link-steering-wheel-control-quad-core-s128033

This car radio is upgraded to an advanced Android 5.1.1 operation system and a strong RK3188 1.6 GHz Cortex A9 Quad-core processor to enhance the capabilities as well as smooth the operation.

Hand-free calls and streaming music are both supported if you pair your Bluetooth-enabled mobile phone or other enabled devices with this unit through Bluetooth technology. Therefore, you will embrace a safe and cheerful driving.

Thanks to the 3D GPS navigation system of high precision, you can be accurately guided to any places you’d like to go according to turn-by-turn directions and voice prompts. And with dual-zone function, you can play your favorite music behind the scene under GPS mode which won’t have any influence on GPS function.

What’s more, there are a lot of entertainment ways to relax both yourself and your passengers by this radio, including playing DVDs, CD, VCD, music, TV programs and movies, etc.

What are you waiting for? This radio is at a competitive price now, just take it without hesitation!

Excellent Tutorial on a 2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 Radio Removal to Install an All-in-one Stereo CD Player Speakers

Posted on March 3, 2017 by john — 16 Comments ↓ 13,309 views

2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 car stereo after installation

Would you like to listen to your favorite music while you are navigating to your desired destinations under the guidance of GPS navigation system? If your answer is “yes”, you should replace your single functional factory radio with a new aftermarket stereo which supports dual zone function. And to successfully finish the installation, you can find a detailed installation guide to help you. The following is the installation steps on a 2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 car stereo. You might follow them to help with the installation.

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 car stereo installation steps

1. First detach the gear shift panel.

2. Use a screw driver to remove the screw marked with a red circle to release the car charger and ashtray.

3. Remove the car charger and ashtray assembly.

4. Use a screw driver to remove the screw marked with a red circle.

5. Pry the air conditioner panel out with a plastic lever.

6. Remove the original air conditioner panel.

7. Remove the heated seat and control panel assembly.

8. Pay attention to this buckle.

9. Remove two screws.

10. Pull out the original car radio.

11. Check all the accessories for the new Seicane stereo.

12. Connect the harnesses to the back of the new Seicane stereo.

13. Connect the Seicane stereo to your original car radio ‘s plugs.

14. Install the new Seicane radio back after the wiring harness has been connected. Fasten the four screws.

15. Install the air conditioner panel, the car charger, the ashtray, the heated seat and the control panel back.

16. Reinstall cigarette lighter.

17. Turn on the new Seicane stereo and have a careful check if everything works well.

Do not be upset if you meet some difficulties before or during the installation. In order to overcome the difficulties, you can only contact your dealer but also seek help from a professional or an experienced person.

Only a suitable car stereo can work well with your car. So before the installation, please check the compatibility between your new car stereo and your car. If you don’t have a compatible car stereo, you might check out the following link which is a 2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 car stereo from Seicane.

http://www.seicane.com/aftermarket-dvd-player-gps-navigation-system-for-2004-2011-mercedes-benz-clk-w209-clk270-clk320-clk350-clk500-clk550-support-radio-bluetooth-rearview-camera-tv-tuner-usb-sd-canbus-1080p-video-dvr-s127508d

This stereo which is specific for 2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 runs with the latest WinCE 6.0 operation system and a strong MTK3360 800MHZ+250MHZ DSP Dual-Core CPU to provide you with smooth operation and great performance.

When referring the practical features, you must pay attention to its GPS function and Bluetooth connectivity. With the help of the built-in GPS navigation, this stereo enables you to find the best way to reach your desired destinations according to text-to -speech guidance, route planning, lane assist and millions of points of interests. And the dual zone function supported enables you to play your favorite music while navigating.

Under the wireless Bluetooth technology, you can freely connect your Bluetooth-enabled mobile phone or other enabled devices to this unit. By doing so, you can dial, receive, reject and mute hands-free calls as well as listen to your favorite music streaming from your phone music playlists.

Wish you like this unit. Good luck to you!

Effective methods to deal with the steering wheel control problem of a 2005-2013 Alfa Romeo 147 car stereo DVD player GPS navigation

Posted on February 22, 2017 by john — No Comments ↓ 6,760 views

2005-2013 Alfa Romeo 147 car stereo DVD player after installation

Frankly speaking, one of the simplest ways to improve your driving experience in a 2005-2013 Alfa Romeo 147 is to replace your factory radio with a brand new stereo integrated with numerous practical and entertainment features. With a new multifunctional car stereo in your car, you can be offered with not only the greatest convenience but also the entertainment. Although the installation is not difficult, you might encounter any problems. Today I would like to introduce effective instructions to deal with the steering wheel control problem during your installation for a 2005-2013 Alfa Romeo 147 car stereo DVD player.

Steering wheel control connection instruction

About the steering wheel control, please connect the steering wheel control plug (the red one) to your original car’s steering wheel control plug. Then you will enter the steering wheel control learning interface, you can follow the instructions step-by-step.

The steering wheelcontrol learning instructions are as followings:

After you finish the steering wheel control learning, your original car’s steering wheel buttons will work.

If the steering wheel control still can’t work, then it is the problem of your original car’s steering wheel control cables. Maybe the steering wheel control PIN of your original car’s steering wheel control plug is different from ours. Please find out your original car’s steering wheel control cables: 2 steering wheel control wires and 1 steering wheel GND wire. Please connect these 3 wires to our 3 steering wheel control wires which are on the red steering wheel control plug. You can see that these 2 green wires are steering wheel control wires, and the white wire is steering wheel GND wire. After you connect these 3 wires well, your original car’s steering wheel buttons will work perfectly.

Please note: the following wiring diagram is provided for your reference.

2005-2013 Alfa Romeo 147 car stereo DVD player

Above is about how to solve the steering wheel control connection problem. If you still have any problems, you can turn to a professional for help.

Anyway, before the installation, please be 100% sure that you have a stereo which can work well with your car. If you don’t have a car stereo for your car, I’d like to recommend one from Seicane for you.

http://www.seicane.com/alfa-romeo-147-dvd-player-with-gps-navigation-radio-bluetooth-ipod-srd-8805

With intelligent WinCE6.0 operation system and the newest 800MHz ARM11 processor, this Seicane stereo is specially built for Alfa Romeo 147 of year from 2005 to 2013.

There are a wide range of attractive features being supported by this 2005-2013 Alfa Romeo 147 car stereo which can meet your various needs in car, including 3D GPS, Bluetooth hands-free calls, Bluetooth music, FM/AM radio, RDS, Aux in, iPod, etc.

What are you waiting for? Just install this 2005-2013 Alfa Romeo 147 car stereo in your car now. This unit will perfectly upgrade your factory radio with both its comprehensive practical and entertainment features.

How to install a 2003-2011 Porsche Cayenne gps dvd car stereo and make it work effectively

Posted on February 21, 2017 by john — No Comments ↓ 4,178 views

2003-2011 Porsche Cayenne gps dvd car stereo after installation

Here comes an advanced 2003-2011 Porsche Cayenne car stereo from Seicane after installation. It is equipped with the stable Android 5.1.1 operation system and the powerful quad-core CPU for you to upgrade your factory radio for your 2003-2011 Porsche Cayenne. Today I would like to show you a detailed 2003-2011 Porsche Cayenne gps dvd car stereo installation guide for your reference and introduce you how to make this stereo normally work if there is no sound coming out from it.

Please pay attention to the tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2003-2011 Porsche Cayenne car radio installation guide

1. Pry out the trim piece along the perimeter of the center dashboard with a lever.

2. Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation.

3. Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily.

Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily

4. Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray.

5. Press the tab (green arrow) on the antenna lead and pull it out of the stereo.

6. Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle’s different years.

Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle's different years — Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle’s different years

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original car radio’s plugs. And put the new Seicane car radio back into the dash.

10. Install two screws and trim piece.

11. Turn on the new car radio and have a comprehensive test.

Before or during the installation, if you have any questions, you can turn to a professional for help. Besides, if you are interested in this intelligent 2003-2011 Porsche Cayenne gps dvd car stereo from Seicane, please check out the following link:

http://www.seicane.com/seicane-s127014-quad-core-android-in-dash-car-dvd-gps-system-for-2003-2011-porsche-cayenne-with-am-fm-radio-bluetooth-music-mirror-link-obd2-3g-wifi-hd-1024-600-multi-touch-capacitive-screen

This amazing 2003-2011 Porsche Cayenne gps dvd car stereo is integrated with a wide range of features to meet almost all your needs in car, which mainly includes GPS navigation, Bluetooth connectivity, DVD player, radio tuner, USB/SD connection, etc. Apart from these basic features, there are also some optional features that can be added to this unit according to your preference, such as backup camera, OBD2, DAB and so on.

Just install this powerful 2003-2011 Porsche Cayenne gps dvd car stereo in your beloved car and you will embrace a more wonderful driving experience than ever before.

A Guide of How to Install a 2007-2010 Ford Expedition Stereo Carplay Radio Navigation System Easily

Posted on February 10, 2017 by john — No Comments ↓ 14,108 views

2007-2010 Ford Expedition Stereo after installation

Nowadays, more and more people prefer to use Carplay on their drive way. According to the new statistics, the number of car radio with Carplay owner has been increased to more than 40 million this year. However, some people may still wonder how to install it correctly .Thus it is important to get the right skills of installation. Suppose you are are the owner of 2007-2010 Ford Expedition, what will you do when you start to upgrade your new car radio system? Here are some steps that can help you to finish these complex procedures.

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

2007-2010 Ford Expedition head unit installation instruction

Step 1: Remove the trim around gear shifter.

Step 2: Remove screws securing center console lid with a screwdriver.

Step 3: Remove the center console trim.

Step 4: Remove console side panels on both driver and passenger sides.

Step 5: Remove bolts securing radio bezel and AC controls.

Step 6: Unplug AC controls (from passenger side).

Step 7: Remove the radio bezel and AC controls.

Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.

Step 9: Check all the accessories for the new Seicane stereo.

Step 10: Connect the harnesses to the back of the new Seicane stereo.

Step 11: Connect the Seicane stereo to your original car radio’s plugs, and put the new Seicane stereo into the dash.

Step 12: Turn on the new Seicane stereo and check whether the radio is working properly.

Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

By now you should have some idea of what is involved in removing and installing a new car stereo in a 2007-2010 Ford Expedition. If you have questions during this process, you can ask your dealer or professional for help. Still find it too hard and not sure what to go with? Please go to a car stereo upgrade center directly to have the radio installed by a mechanic.

This 2007-2010 Ford Expedition car stereo is running on the latest Android 11.0 and a powerful RK3188 1.5 GHz Cortex A9 8-core processor, which can provide fast response and a stable operation for you.

With ringtones and voice coming out from the car speakers, you can dial, answer, reject and mute calls without taking your hands off the steering wheel. Its phonebook function enables you to search for contacts directly on the big screen of the head unit. The capability to stream your favorite tunes from the Smartphone wirelessly is also desirable. An internal microphone is included for distortion-free talking.

Not only can it provide multifunctional options including backup camera, radio tuner,high speed 4G&wifi internet, but also it supports multi-touch screen with smooth operation, high sensitively and abundant interaction for the better view of your road ahead.

You can buy this fantastic Android car radio system on Seicane official.

How to Upgrade a 2004-2009 VW Volkswagen GOLF Stereo Pure Sound System with Audio Navigation

Posted on February 4, 2017 by john — No Comments ↓ 5,430 views

2004-2009 VW Volkswagen GOLF Stereo Pure Sound System after installation

Nowadays, it needn’t cost you too much money on purchasing a car, so the car has become an ordinary transportation when people go out. As people spend more and more time in their cars, most of them are very keen on creating a more convenient, comfortable and relaxing in-car environment as well as pursuing a wonderful driving experience. Thus car owners will usually replace their factory radios with new aftermarket stereos to achieve these goals. If you own a 2004-2009 VW Volkswagen GOLF, you can take the following installation instruction for a 2004-2009 VW Volkswagen GOLF car stereo.

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004-2009 VW Volkswagen GOLF car stereo installation instruction

1. The original car radio.

2. Prepare four removal keys.

3. There are four removal slots in this radio. Insert the removal keys in the holes of the radio.

4. Pull outwards to release the radio.

5. Remove the four removal keys from the radio.

6. Disconnect the connectors and cables at the back of the radio.

7. Check all the accessories for the new Seicane car stereo.

8. Connect the harnesses to the back of the new Seicane car stereo.

9. Connect the Seicane car stereo to your original radio’s plugs.

10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car stereo into the dash.

12. Put everything into their original place. All the installation is done.

The above is the basic instruction for a 2004-2009 VW Volkswagen GOLF Stereo Pure Sound System removal and installation. Most car radios are with the same guide and there may be little difference at some point, but it will not have much influence on the whole process. Before and during the installation, if you meet any difficulties, you can contact with your dealer for a wiring diagram, seek help from an experienced person or a professional. If you have no ideas about selecting a car stereo, you can check out the link below which is a great 2004-2009 VW Volkswagen GOLF car stereo from Seicane.

http://www.seicane.com/seicane-s127648-2004-2009-vw-volkswagen-golf-pure-android-autoradio-gps-in-car-dvd-system-with-3g-wifi-mirror-link-obd2-bluetooth-steering-wheel-control-aux-rearview-camera

Upgraded to pure Android 5.1.1 operation system and has a high quality RK3188 1.6 GHz Cortex A9 Quad-core processor, this car stereo runs faster than ever because of its better performance. A 7inch HD multi-touch screen with 1024*600 resolution enables you to enjoy the amazing display effect of videos, TV programs, movies, etc as well as have a perfect view of the road ahead. With wifi built in and 3g internet supported, you can freely get access to convenient e-life anytime and anywhere for online entertainment such as video, TV, movie, music, radio and online communication including Skype, MSN, YouTube, twitter and other services. Don’t hesitate to take it right now and wish you embrace an unforgettable driving experience.

Clever Method on a 2009-2013 HONDA PILOT Radio Removal and Installation with An Aftermarket Audio Sound System

Posted on January 18, 2017 by john — 22 Comments ↓ 33,638 views

To keep your passengers relaxed in the back seats of your car, it is necessary for you to upgrade your factory radio by installing a new aftermarket stereo which is equipped with a lot of practical and entertainment features. If you own a 2009-2013 HONDA PILOT, and plan to upgrade your factory radio, you can read the following related installation steps to help with your installation.

2009-2013 HONDA PILOT car radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009-2013 HONDA PILOT car stereo installation steps

1. The original car radio.

2. Start by moving shift lever into lower position.

3. Using your pry tool, carefully pry loose left dash panel and slide over shifter. Then use the pry tool to remove the right panel.

4. Using a Philip head screwdriver to unscrew screws that fix the pocket and then remove it.

5. Unscrews four screws that are holding the radio and then take out the radio.

6. Check all the accessories for the new Seicane car stereo.

7. Connect the harnesses to the back of the new Seicane car stereo.

8. Connect the Seicane car stereo to your original stereo’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

Before the installation, please make clear every step. If you have any doubts, you can consult your dealer or ask someone experienced to help you. But if you still think it hard to finish the installation by yourself, you’d better go to a car stereo upgrade center to arrange a technician to install the stereo. Anyway, first of all, please check whether your new car stereo is compatible with your car or not. If not, here I would like to share a 2009-2013 HONDA PILOT gps navi dvd car stereo from Seicane with you. Please click:

http://www.seicane.com/7-inch-1024-600-touch-screen-2009-2013-honda-pilot-android-4-4-gps-navigation-system-with-3-g-wifi-bluetooth-tpms-dvr-obdii-rear-camera-aux-steering-wheel-control-mirror-link-1080p-quad-core-cpu-s083706

This Seicane 2009-2013 HONDA PILOT car stereo is based on the Pure Android 6.0 operation system and a R16 1.6 GHz Quad-core CPU, so you are able to embrace a brand new smoother and faster operation experience than ever. Even though you don’t have a good sense of direction, you are capable of finding the best way to get to your destinations with the help of the powerful 3D GPS navigation system in high precision. What’s more, with the help of the wireless Bluetooth technology, hands-free calls and Bluetooth music are both available if you connect your Bluetooth-enabled cell phone with this unit. If you like this car stereo, don’t forget to add it to your cart. Good luck to you!

Car DVD

How to Remove and Install a 2006-2012 TOYOTA RAV4 Car Radio with Bluetooth GPS Navigation System

How to Install a 2011 onward Hyundai Accent Blue Car Stereo with Bluetooth GPS System

How to Upgrade a 2008-2014 TOYOTA Sequoia DVD Player with a Multifunctional Car Radio with Touch Screen Bluetooth GPS Navigation System

How to Upgrade a 2013-2016 Toyota RAV4 Radio with Touch Screen Speakers Sound System

Excellent Tutorial on a 2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 Radio Removal to Install an All-in-one Stereo CD Player Speakers

Effective methods to deal with the steering wheel control problem of a 2005-2013 Alfa Romeo 147 car stereo DVD player GPS navigation

How to install a 2003-2011 Porsche Cayenne gps dvd car stereo and make it work effectively

A Guide of How to Install a 2007-2010 Ford Expedition Stereo Carplay Radio Navigation System Easily

How to Upgrade a 2004-2009 VW Volkswagen GOLF Stereo Pure Sound System with Audio Navigation

Clever Method on a 2009-2013 HONDA PILOT Radio Removal and Installation with An Aftermarket Audio Sound System

Categories

Recent Posts

Pages

Recent Comments

Views

Archives

Meta

Blogroll

November 2024
M	T	W	T	F	S	S
« Sep
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30

Categories

Recent Posts

Pages

Recent Comments

Views

Archives

Meta

Blogroll

Tags