Home › Archive for Car DVD › Page 18

Car DVD

introduce car dvd products

13 Steps to remove and install a 2005-2012 Mercedes Benz GL Class X164 gps car stereo with OBD2 DVR Rearview camera TV 1080P Video

Posted on by — No Comments ↓ 5,005 views
2005-2012 Mercedes Benz GL Class X164 gps car stereo after installation

With the rapid development and prevailing of online shopping, it is fairly easy to get an advanced car stereo with intelligent features. If you are being tired of your single-functional factory radio, it is wise of you to buy a brand new online and install it on your own which will save you a lot. This passage is about a step-by-step 2005-2012 Mercedes Benz GL Class X164 gps car stereo installation instruction from Seicane. If you own a 2005-2012 Mercedes Benz GL Class X164 gps car stereo, it suggests you to read it carefully.

2005-2012 Mercedes Benz GL Class X164 gps car stereo after installation
2005-2012 Mercedes Benz GL Class X164 gps car stereo after installation

 

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2005-2012 Mercedes Benz GL Class X164 gps car stereo installation instruction

1. The original car stereo.

The original car stereo
The original car stereo

2.Pry the bottoming panel out of the dash with a plastic knife.

Pry the bottoming panel out of the dash with a plastic knife
Pry the bottoming panel out of the dash with a plastic knife
2-1
2-1

3.Pry the air conditioner panel out and remove it.

Pry the air conditioner panel out and remove it
Pry the air conditioner panel out and remove it

4.Remove two screws that fixed the radio on the dashboard with a screwdriver.

Remove two screws that fixed the radio on the dashboard with a screwdriver
Remove two screws that fixed the radio on the dashboard with a screwdriver

5. Use your finger to pull the buckles down.

Use your finger to pull the buckles down
Use your finger to pull the buckles down
5-1
5-1

6.Gently pull the factory radio out of the dash.

Gently pull the factory radio out of the dash
Gently pull the factory radio out of the dash

7. Then unplug the connectors at the back of the factory radio.

Then unplug the connectors at the back of the factory radio
Then unplug the connectors at the back of the factory radio

8. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo
Check all the accessories for the new Seicane car stereo

9. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo
Connect the harnesses to the back of the new Seicane car stereo

10. Connect the Seicane car stereo to your original stereo’s plugs.

11. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car stereo into the dash.

13. Put everything into their original place. All the installation is done.

 

To have a successful installation, please make sure you are clear about every step before your installation. If you have any question, you can consult your dealer for suggestions. But if you don’t have some experience before and you think it too hard for you to achieve the whole installation, you’d better go to a car stereo upgrade centre and ask a technician to help you install it directly. If you are searching for a suitable car stereo online, you may check the link below which is about a remarkable 2005-2012 Mercedes Benz GL Class X164 gps car stereo from Seicane.

http://www.seicane.com/oem-gps-dvd-player-android-navigation-system-for-2005-2012-mercedes-benz-gl-class-x164-gl300-gl350-gl420-with-mirror-link-radio-hd-1024-600-touch-screen-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-steering-wheel-control-usb-sd-s167219

This car stereo with the latest Android 5.1.1 operating system and a RK3188 1.6 GHz Cortex A9 Quad-core processor will be your best choice to upgrade your in-car environment. The accurate text-to-speech guidance of the GPS system makes it possible for you to find the best route to your ideal destination. With the aid of Bluetooth technology, you can have hands-free calls to keep safer and stream music to have fun. To please both you and your passenger, this unit allow you to play region-free DVDs, TV programs, FM/AM radio, etc, all the way. Just install this marvelous 2005-2012 Mercedes Benz GL Class X164 gps car stereo in your beloved car and enjoy your long journey from now on!

How to upgrade a 2013 2014 Suzuki S Cross android radio dvd gps with Bluetooth Rearview camera

Posted on by — No Comments ↓ 4,105 views
2013 2014 Suzuki S Cross android radio dvd gps after installation.

Are you annoyed at your factory radio that cannot be compatible with a range of new features? If your answer is yes, then it’s high time for you to replace your factory radio with an advanced car stereo. An up-to-date car stereo can improve your in-car environment and driving experience. And it is easy for you to install a car stereo on your own under a detailed installation guide. This passage mainly introduces how to upgrade a 2013 2014 Suzuki S Cross car stereo, if you have the same dashboard as followings, you may refer to it.

2013 2014 Suzuki S Cross android radio dvd gps after installation.
2013 2014 Suzuki S Cross android radio dvd gps after installation.

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Please prepare a lever and a screwdriver before the removal and the installation.

5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

 

2013 2014 Suzuki S Cross car stereo installation steps

1. The original car radio.

The original car radio
The original car radio

2. Remove the light with a plastic knife and unplug the connector at the back of the indicator light.

Remove the light with a plastic knife and unplug the connector at the back of the indicator light
Remove the light with a plastic knife and unplug the connector at the back of the indicator light
2-1
2-1
2-2
2-2

3. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

4. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard
Remove screws that fixed the radio on the dashboard
4-1
4-1

5. Gently pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Gently pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
Gently pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

6. Unplug the connectors at the back of the factory radio. Use a plastic knife if it is necessary.

Unplug the connectors at the back of the factory radio. Use a plastic knife if it is necessary
Unplug the connectors at the back of the factory radio. Use a plastic knife if it is necessary
6-1
6-1

7. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit
Check all the accessories for the new Seicane head unit

8. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane head unit
Connect the harnesses to the back of the new Seicane head unit

9. Connect the Seicane head unit to your original head unit ‘s plugs.

10. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane head unit into the dash.

12. Put everything into their original place. All the installation is done.

 

The above is the whole installation processing for a 2013 2014 Suzuki S Cross car stereo, it is not complicated, isn’t it? During the installation, if you meet with difficulties, you can ask your dealer or a professional for help. But if you don’t have an ideal car radio for your beloved car, I’d like to recommend a 2013 2014 Suzuki S Cross car stereo from Seicane to you, please click for more details.

http://www.seicane.com/8-inch-2013-2014-suzuki-s-cross-android-radio-dvd-gps-navigation-system-with-hd-1024-600-touch-screen-bluetooth-obd2-dvr-rearview-camera-tv-1080p-video-usb-sd-3g-wifi-ipod-steering-wheel-control-mirror-link-s168073

This car radio for 2013 2014 Suzuki S Cross comes with a digital HD 1024*600 multi-touch screen which provides you with not only sensitive operation but also best visual effects. It will guide you to any unfamiliar destinations with its powerful 3D GPS Navigation of high accuracy.

As for the entertaining options, you don’t have to worry about them. Because in the motion, you are able to play not only movies or videos but also CDs, VCDs, Bluetooth music, and FM/AM radio to relax both you and your passengers. Wish you like it and have a nice day!

How to upgrade a 2008-2012 KIA CERATO (AT) gps Bluetooth car radio with dvd player Touch screen

Posted on by — No Comments ↓ 3,905 views
Seicane 2008-2012 KIA CERATO (AT) gps Bluetooth car radio after installation

One of the easiest way to improve the in-car environment is to upgrade a brand new car radio with both practical functions and entertainment features. Some car owners with relevant installation experience are capable of replacing their factory radios with high-end radios but as for green hands, they have to arrange a professional to help them install car radios, which may cost much money and waste time. Whoever you are, to save your money and time, the following installation guide for a 2008-2012 KIA CERATO (AT) gps Bluetooth car radio can be taken as a reference.

Seicane 2008-2012 KIA CERATO (AT) gps Bluetooth car radio after installation
Seicane 2008-2012 KIA CERATO (AT) gps Bluetooth car radio after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2008-2012 KIA CERATO (A T) car radio installation guide

1.Remove the right air conditioner vent with a removal tool, and set it aside.

Remove the right air conditioner vent with a removal tool, and set it aside
Remove the right air conditioner vent with a removal tool, and set it aside

2.Remove the left air conditioner vent in the same way as step 1, and set it aside.

Remove the left air conditioner vent in the same way as step 1, and set it aside
Remove the left air conditioner vent in the same way as step 1, and set it aside

3.Unscrew all the screws holding the original car radio in dash with a screwdriver.

Unscrew all the screws holding the original car radio in dash with a screwdriver
Unscrew all the screws holding the original car radio in dash with a screwdriver

4.Gently take the original car radio out of the dash.

Gently take the original car radio out of the dash
Gently take the original car radio out of the dash

5.Disconnect all connectors at the back of the original car radio.

6.Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

7.Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

8.Connect the Seicane car radio to your original car radio ‘s plugs.

9.Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10.Put the new Seicane car radio into the dash.

11.Put everything into their original place. All the installation is done.

 

Wish the above 2008-2012 KIA CERATO (A T) car radio installation guide can help you in some sense. If you don’t understand it totally, please seek help from your dealer. Before the installation, please check if your car radio fits well with your beloved car. If it can not work well, you’d better buy a new one. Here is a smart 2008-2012 KIA CERATO (A T) car radio from Seicane I recommend to you, you can click the link for more details.

http://www.seicane.com/oem-android-radio-gps-navigation-system-for-2008-2012-kia-cerato-at-with-bluetooth-mp3-hd-1024-600-touchscreen-dvd-player-obd2-dvr-rearview-camera-tv-3g-wifi-steering-wheel-control-usb-sd-1080p-video-mirror-link-s168045

This double din gps Bluetooth car radio is special designed for 2008-2012 KIA CERATO (AT), which remains the original functions of the steering wheel control as well as increases more practical and entertainment features. By simply pressing the GPS button, you can take advantage of accurate 3D positioning to find your way to your destination via text-to-speech guidance. Furthermore, the application of Bluetooth technology helps you have hands-free calls without keeping your hands off the steering wheel, which brings you more convenience and security. As for the entertainment functions, this car radio allows you to play Bluetooth music, CDs, DVDs, TV programs, films, etc. Just make this fantastic 2008-2012 KIA CERATO (AT) car radio along with you on your way.

The step-by-step installation guide for a 2004-2010 Nissan VERSA Bluetooth gps dvd stereo with Android5.1.1 Touch Screen

Posted on by — No Comments ↓ 5,132 views
2004-2010 Nissan VERSA Bluetooth gps dvd stereo after installation

In the past you may spent money or time in arranging professionals to install car accessories for your car. But now it will save you a lot of money as well as time if you have the ability to change your original aftermarket or accessories especially a car stereo. Here is a detailed installation guide from Seicane for a 2004-2010 Nissan VERSA Bluetooth car stereo. It can be taken as reference for you if you want to try changing a new car stereo by yourself.

2004-2010 Nissan VERSA Bluetooth gps dvd stereo after installation
2004-2010 Nissan VERSA Bluetooth gps dvd stereo after installation

Here are 4 tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2004-2010 Nissan VERSA car stereo installation guide

1. Use a screwdriver to remove two screws above the Nissan Frontier radio.

Use a screwdriver to remove two screws above the Nissan Frontier radio
Use a screwdriver to remove two screws above the Nissan Frontier radio

2. Remove the trim panel.

Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel.

Remove the trim panel
Remove the trim panel

3. Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel.

Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel
Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel

4. Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio.

Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio
Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio

5. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit
Check all the accessories for the new Seicane head unit

6. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane head unit
Connect the harnesses to the back of the new Seicane head unit

7. Connect the Seicane head unit to your original car radio ‘s plugs.

8. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane head unit into the dash.

10. Put everything into their original place. All the installation is done.

 

Now for the installation of a car stereo, whether you have a certain degree of understanding or not? If you cannot successfully install your new car stereo, it will be a better idea to ask your dealer or professionals for help. One thing you have to pay more attention to is: you ought to have an ideal car stereo for your car. If you are still looking for a suitable one, please click the link below for more details.

http://www.seicane.com/2004-2010-nissan-versa-androi-dvd-player-gps-navigation-system-bluetooth-radio-hd-1024-600-touch-screen-mirror-link-obd2-dvr-tv-3g-wifi-usb-sd-rearview-camera-1080p-video-s166226

This latest 2004-2010 Nissan VERSA car stereo comes with functions, including 3D GPS navigation system, CD/DVD player, Bluetooth technology, rearview camera, etc, from which you can get a lot convenience. When you travel around a city, a smart car stereo with these features can not only guarantee your driving safety and comfort but also can provide you with an unforgettable holiday. If you like it, do not hesitate to take it home. Good luck to you!

The easy way to upgrade a 1998-2004 Mercedes Benz CLK Class C209 bluetooth dvd gps radio with Android 5.1.1 OBD2

Posted on by — No Comments ↓ 3,097 views

Look at the picture shown below, it’s the 1998-2004 Mercedes Benz CLK Class C209 bluetooth dvd gps radio after installation from Seicane. If you are the car owner of the Mercedes Benz CLK Class, this passage is worth for you to read it. I’d like to share a detailed installation guide for it and wish you can learn something from that.

1998-2004 Mercedes Benz CLK Class C209 bluetooth dvd gps radio after installation
1998-2004 Mercedes Benz CLK Class C209 bluetooth dvd gps radio after installation

 

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

1998-2004 Mercedes Benz CLK Class C209 bluetooth dvd gps radio installation guide

1. First detach the gear shift panel.

First detach the gear shift panel
First detach the gear shift panel

2. Remove the car charger and ashtray.

Remove the car charger and ashtray
Remove the car charger and ashtray

3. Use a screw driver to remove the screws under the A/C.

Use a screw driver to remove the screws under the A/C
Use a screw driver to remove the screws under the A/C

4. Pry the air conditioner panel out with a plastic lever.

Pry the air conditioner panel out with a plastic lever
Pry the air conditioner panel out with a plastic lever

5. Remove the original air conditioner panel.

Remove the original air conditioner panel
Remove the original air conditioner panel

6. Remove the heated seat and control panel assembly.

Remove the heated seat and control panel assembly
Remove the heated seat and control panel assembly

7. Remove the screws holding the radio.

Remove the screws holding the radio
Remove the screws holding the radio

8. Pull out the original car radio.

Pull out the original car radio
Pull out the original car radio

9. Disconnect the original harness.

Disconnect the original harness
Disconnect the original harness

10. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

11. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

12. Connect the Seicane car radio to your original car radio ‘s plugs.

13. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

 

If you can’t understand the steps above, you can turn to the dealer to ask for help. Or arrange the professional to install it. Before the installation, the most important thing is find the suitable car stereo for your car. If you are still looking for one, I’d like to recommend the newest 1998-2004 Mercedes Benz CLK Class C209 bluetooth dvd gps radio from Seicane to you as reference.

http://www.seicane.com/seicane-s127507-1998-2004-mercedes-benz-clk-class-c209-clk200-clk230-clk320-android-radio-dvd-navigation-system-with-bluetooth-music-mirror-link-obd2-3g-wifi-flash-hd-1024-600-multi-touch-screen

Featured with 3D high precision GPS and advanced Audio streaming via A2DP Bluetooth system, this multifunctional head unit enables you to enjoy the accurate guidance as well as play music from a mobile phone and make phone calls in the car easily. This amazing 1998-2004 Mercedes Benz CLK Class C209 bluetooth dvd gps radio is right choice for you and your car!

How to easily upgrade a 1996-2003 BMW 5 Series E39 bluetooth dvd navigation system support 3G WiFi Radio Mirror Link

Posted on by — 2 Comments ↓ 11,884 views

With the most up-to-date car stereo in your car, you can enjoy much fun and enjoyment on all trips. But how do I upgrade the old factory radio? Do I have to go to the stereo upgrade center or professionals to upgrade the radio? Absolutely not. In fact, you just need a step-by-step installation guide to learn the installation process. In here, I’d like to introduce a installation guide for a 1996-2003 BMW 5 Series E39 bluetooth dvd navigation system from Seicane to you. Wish you can get some help from that.

1996-2003 BMW 5 Series E39 bluetooth dvd navigation system after installation
1996-2003 BMW 5 Series E39 bluetooth dvd navigation system after installation

 

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

1996-2003 BMW 5 Series E39 bluetooth dvd navigation system installation guide

1. Use a plastic trim tool to remove trim strip.

Use a plastic trim tool to remove trim strip
Use a plastic trim tool to remove trim strip

2. Remove screws marked by red arrows.

Remove screws marked by red arrows
Remove screws marked by red arrows

3. Take out original DVD player of the car.

Take out original DVD player of the car
Take out original DVD player of the car

4. Pull out original power plug of the car.

Pull out original power plug of the car
Pull out original power plug of the car

5. Connect the power cables as the picture shows.

Connect the power cables as the picture shows
Connect the power cables as the picture shows

6. Remove screws in the spare tire in the trunk.

Remove screws in the spare tire in the trunk
Remove screws in the spare tire in the trunk

7. Take out the spare tire.

Take out the spare tire
Take out the spare tire

8. Remove four screws marked with red arrows.

Remove four screws marked with red arrows
Remove four screws marked with red arrows

9. Remove screws in triangle crutch.

Remove screws in triangle crutch
Remove screws in triangle crutch

10. Take out triangle crutch.

Take out triangle crutch
Take out triangle crutch

11. Connect original plug of the car with power plug of DVD GPS.

Connect original plug of the car with power plug of DVD GPS
Connect original plug of the car with power plug of DVD GPS

12. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit
Check all the accessories for the new Seicane head unit

13. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane head unit
Connect the harnesses to the back of the new Seicane head unit

14. Connect the Seicane head unit to your original car radio ‘s plugs.

15. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16. Put the new Seicane head unit into the dash and install the four screws.

17. Install the trim panel into its original place.

 

All above is the detailed installation guide for a 1996-2003 BMW 5 Series E39 bluetooth dvd navigation system. If you don’t have any experience of installation or any problem with this guide, you can go to the dealer ask for help. Or arrange the professional to install it directly. In addition, you have to find the suitable car stereo for your car at first. Do you have the suitable car stereo? If you don’t have one, this multifunctional 1996-2003 BMW 5 Series E39 bluetooth dvd navigation system from Seicane is one of your best choice. You can click this link to check it:

http://www.seicane.com/seicane-s12753-android-sat-nav-stereo-for-1996-2003-bmw-5-series-e39-520i-523i-525i-m5-with-hd-1024-600-multi-touch-screen-3g-wifi-dvd-bluetooth-radio-mirror-link-obd2

With the most up-to-date intelligent pure android 5.1.1 operation system, you can count on its latest built-in 3D GPS and voice prompts to enter the correct direction of the destination. A variety of additional entertainment features can also bring you a wonderful and relaxing journey that you never ever had before. Wish you like it and enjoy the good time with it from now!

9 easy steps to install a 2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo with 3G WiFi DVR Tuner

Posted on by — 9 Comments ↓ 9,554 views
2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo after installation

Are you looking for a detailed installation guide in order to install the new car head unit in your car? If you are looking for the installation guide, this article is worth for you to read it. In the following, I’d like to share a detailed installation guide for a 2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo from Seicane with you. Here is the picture after the installation.

2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo after installation
2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo installation guide

1. Release the panel from the gearlever by your hands.

Release the panel from the gearlever by your hands
Release the panel from the gearlever by your hands

2. Remove the cigarette lighter and put it aside.

Remove the cigarette lighter and put it aside
Remove the cigarette lighter and put it aside

3. Remove two screws under the CD changer and take out the CD changer.

3-1.Remove two screws under the CD changer and take out the CD changer
3-1.Remove two screws under the CD changer and take out the CD changer
3-2
3-2

4. Remove the two screws under the original radio.

Remove the two screws under the original radio
Remove the two screws under the original radio

5. Pull out the original radio and disconnect the wires.

5-1.Pull out the original radio and disconnect the wires
5-1.Pull out the original radio and disconnect the wires
5-2
5-2

6. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit
Check all the accessories for the new Seicane head unit

7. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane head unit
Connect the harnesses to the back of the new Seicane head unit

8. Put the new Seicane unit into the dash.

9. Turn on the new Seicane unit and have a comprehensive check if it works well. If not, please check whether all the cables are connected correctly.

 

All above is the detailed installation guide for a 2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo and wish you can learn something from it. If you don’t have any experience of installation, it suggests you to the dealer or professional ask for help. Besides, it’s very important for you to find the suitable car head unit at first. If you don’t have one yet, I’d like to introduce a newest 2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo from Seicane to you and wish you like it.

http://www.seicane.com/seicane-s127501-android-car-stereo-dvd-gps-system-for-2002-2008-mercedes-benz-e-class-w211-e200-e220-e230-e240-with-bluetooth-radio-tuner-3g-wifi-mirror-link-obd2-rearview-camera-dvr-s127501

The 2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo of high quality with a 7 Inch touch screen, GPS and Bluetooth connectivity is a great discount priced in-car entertainment system that offers all the latest features, including 3D navigation, Bluetooth, CD DVD player, radio tuner, office tools, file management, etc. Have a good time with it from now!

How to skillfully replace a 2003-2010 Toyota Avanza stereo gps audio system with DVD player TV USB

Posted on by — No Comments ↓ 4,075 views
2003-2010 Toyota Avanza stereo gps audio system after installation

What will you do when you are stuck in a traffic jam? Do you want to listen your favorite music and surf internet during this time? Now, you can enjoy all of this and best experience from the most up-to-date car stereo. In here, I’d like to introduce a detailed installation guide for a 2003-2010 Toyota Avanza stereo gps audio system from Seicane and you can take this as reference.

2003-2010 Toyota Avanza stereo gps audio system after installation
2003-2010 Toyota Avanza stereo gps audio system after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2003-2010 Toyota Avanza stereo gps audio system installation guide

1. Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside
Remove two trim panels at each side of the center console and set it aside

2. Remove the top panel and set it aside.

Remove the top panel and set it aside
Remove the top panel and set it aside

3. Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver
Remove 4 screws holding the unit with a Phillips screwdriver

4. Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface
Gently take out the panel on the radio interface

5. Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it
Take out the radio and disconnect cables at back of it

6. Check all the accessories for the new Seicane head unit.

7. Connect the harnesses to the back of the new Seicane head unit.

8. Connect the Seicane head unit to your original car radio ‘s plugs.

9. Put the new Seicane head unit into the dash.

10. Turn on the new Seicane head unit and have a comprehensive check if it works well.

11. Install 4 screws back to their original position.

12. Install the trim panel back to its original place.

 

After reading this installation guide for a 2003-2010 Toyota Avanza stereo gps audio system, wish you can learn something from that and try to install it by yourself. If you find the picture shown above is different from your dashboard, please rest assured that the installation guide is much same. Or you can go the dealer or professional to ask them install it directly. Moreover, you have to make sure the new car stereo can work well in your car. If you don’t have one yet, I’d like to share a wonderful 2003-2010 Toyota Avanza stereo gps audio system from Seicane with you.

http://www.seicane.com/android-car-stereo-bluetooth-gps-navigation-system-for-2003-2010-toyota-avanza-with-dvd-player-mirror-link-hd-touch-screen-obd-dvr-rearview-camera-tv-usb-sd-radio-3g-wifi-ipod-s166229

This most up-to-date 2003-2010 Toyota Avanza stereo gps audio system is the best replacement for the factory radio. The Bluetooth technology let you wirelessly pair with your Bluetooth-enabled cell phones for hands-free calls and streaming music to have a safe and cheerful journey. Wish you like it!

A detailed installation guide for a 2005-2010 Toyota Fortuner head unit with 3G WIFI Radio GPS navigation DVD TV USB

Posted on by — No Comments ↓ 3,720 views
2005-2010 Toyota Fortuner head unit after installation

In our daily life, the network is becoming more and more important. Without the network, we can’t get the latest news and communicate with people immediately. Do you want to surf the internet and download the apps freely in your car? If you want, the best choice for you is to upgrade old factory radio to a multifunctional new head unit. Here, I’d like to share a detailed installation guide for a 2005-2010 Toyota Fortuner head unit from Seicane. You can take it as reference.

2005-2010 Toyota Fortuner head unit after installation
2005-2010 Toyota Fortuner head unit after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2005-2010 Toyota Fortuner head unit installation guide

1. Remove the panel with a lever on the both side and disconnect the wire.

1-1. Remove the panel with a lever and pull it away from dash
1-1. Remove the panel with a lever and pull it away from dash
1-2
1-2

2. Unscrew the four bolts holding the original car radio.

Unscrew the four bolts holding the original car radio
Unscrew the four bolts holding the original car radio

3. Take out the car radio and disconnect the wire harness at the back of the unit.

3-1. Take out the car radio and disconnect the wire harness at the back of the unit
3-1. Take out the car radio and disconnect the wire harness at the back of the unit
3-2
3-2

4. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

5. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

6. Connect the Seicane car radio to your original car radio ‘s plugs.

7. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

8. Put the new Seicane radio into the dash.

9. Put everything into their original place. All the installation is done.

 

All above is the detailed installation guide for a 2005-2010 Toyota Fortuner head unit from Seicane. If you don’t have any experience of installation, it suggests you arrange the dealer or profession to install it directly.

In addition, the first thing for you to do is find a suitable head unit for your car. If you are looking for one, this is a link of newest 2005-2010 Toyota Fortuner head unit from Seicane for your reference:

http://www.seicane.com/2005-2010-toyota-fortuner-android-radio-gps-navigation-dvd-player-touch-screen-obd-dvr-rearview-camera-tv-usb-sd-3g-wifi-bluetooth-cpu-mirror-link-ipod-s166957

This multimedia 2005-2010 Toyota Fortuner head unit supports surfing internet via 3G or WiFi. You can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet. Wish you like it!

How to upgrade a 2009-2013 Toyota PRIUS right head unit with Bluetooth touch screen OBD DVR Backup camera TV USB SD 3G WIFI IPOD

Posted on by — 4 Comments ↓ 9,388 views
2009-2013 Toyota PRIUS right head unit after installation

How can I improve my car interior environment? How can I get extraordinary driving experience? The best way for you is to upgrade your old factory radio. It’s not only improve your car interior environment, but also bring convenience and entertainment feature to you. So, the detailed installation instruction is necessary for the car owner. I’d like to share a detailed installation instruction for a 2009-2013 Toyota PRIUS right head unit from Seicane with you and you can take it as reference.

2009-2013 Toyota PRIUS right head unit after installation
2009-2013 Toyota PRIUS right head unit after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

Toyota PRIUS right head unit installation instruction

1. Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool.

Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool
Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool

2. Remove the dash panel below the stereo. Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash.

Remove the dash panel below the stereo
Remove the dash panel below the stereo

3.Remove the vent panel to the right of the stereo as you did the left panel. It is only connected with clips that can be pulled free with moderate force.

Remove the vent panel to the right of the stereo as you did the left panel. It is only connected with clips that can be pulled free with moderate force
Remove the vent panel to the right of the stereo as you did the left panel. It is only connected with clips that can be pulled free with moderate force

4. Disconnect the wiring.

Disconnect the wiring
Disconnect the wiring

5. Remove the stereo by removing the four screws near the corners of the stereo mounting bracket with a Phillips-head screwdriver.

Remove the stereo by removing the four screws near the corners of the stereo mounting bracket with a Phillips-head screwdriver
Remove the stereo by removing the four screws near the corners of the stereo mounting bracket with a Phillips-head screwdriver

6. Pull the radio toward you slowly.

Pull the radio toward you slowly
Pull the radio toward you slowly

7. Pull the stereo from its dock and pull the wire groups from the back of the stereo. Grab the groups by the white plastic wire binders, not the wires themselves.

Pull the stereo from its dock and pull the wire groups from the back of the stereo. Grab the groups by the white plastic wire binders, not the wires themselves
Pull the stereo from its dock and pull the wire groups from the back of the stereo. Grab the groups by the white plastic wire binders, not the wires themselves

8. Check all the accessories for the new Seicane car radio.

9. Connect the harnesses to the back of the new Seicane car radio.

10. Connect the Seicane car radio to your original car radio ‘s plugs.

11. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane radio into the dash.

13. Put everything into their original place.

That’s all the detailed installation instruction for a 2009-2013 Toyota PRIUS right head unit. If you find it is hard to install by yourself, it suggests you to the dealer ask for help or arrange the professional to install it. If the picture shown above is different from your dashboard, please rest assured that the instruction is much same. Besides, you have to find the suitable head unit for your car. If you don’t have one, here is the wonderful 2009-2013 Toyota PRIUS right head unit from Seicane to recommend.

http://www.seicane.com/android-in-dash-car-dvd-player-radio-gps-navigation-system-for-2009-2013-toyota-prius-right-with-bluetooth-touch-screen-obd-dvr-backup-camera-tv-usb-sd-3g-wifi-ipod-mirror-link-s168004r

This hot 2009-2013 Toyota PRIUS right head unit is loaded with a powerful 1.6 GHz Cortex A9 Quad-core to enhance the processing ability for users. The hard disc capacitance up to 16G allows more information and database to be processed in this head unit. You will be accurately guided to anywhere you like with its 3D precise GPS and enjoy yourself with a multiple entertainment options supported by it while you are driving. Enjoy a good time with it from now!