How to Install and Upgrade a 2009 2010 2011 2012-2016 NISSAN NV200 GPS Navigation Bluetooth Mirror Link Carplay USB SD Head Unit

Posted on January 25, 2019 by john — No Comments ↓ 3,652 views

If your factory radio is too out-dated, in my opinion, it is wise of you to replace your factory radio with a brand new multifunctional car radio so that you can enjoy more convenience and enjoyment as well as embrace a brand new driving experience. The following is a 2009 2010 2011 2012-2016 NISSAN NV200 car radio installation instruction from Seicane which I would like to share with you. If you own the same or similar dashboard, you’d better refer to this instruction.

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009 2010 2011 2012-2016 NISSAN NV200 car radio installation instruction

1. The original car radio.

2. Grab the ashtray and take it out.

3. Remove the metal platefrom the bottom.

4. Release this panel.

5.Push the button upwards to unsnap it.

6. Take out this panel softly.

7. Unscrew two screws fixed the radio frame.

8. Get your nails underneath to click off the radio frame.

9. Unscrew the screws holding the radio on the dashboard.

10. Take out the original car stereo and disconnect the connectors at the back of the stereo.

11. Check all the accessories for the new Seicane car stereo.

12. Connect the harnesses to the back of the new Seicane car stereo.

13. Connect the Seicane car stereo to your original stereo’s plugs.

14. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

15. Put the new Seicane car stereo into the dash.

16. Put everything into their original place. All the installation is done.

Wish the above installation steps can be helpful for you. If you have any doubts, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard to install the new car radio by yourself, you can directly ask a professional technician to help you with the installation. Besides, it is very essential for you to pick an ideal car radio. If you have no ideas, you can check out the following link which is an amazing 2009 2010 2011 2012-2016 NISSAN NV200 car radio from Seicane.

https://www.seicane.com/android-hd-touchscreen-radio-for-2009-2016-nissan-nv200-gps-navigation-car-stereo-bluetooth-support-mirror-link-obd2-aux-3g-wifi-dvr-1080p-video-steering-wheel-control-s04109e

Above link related car head unit comes with RAM 2GB \ ROM 32GB \ CPU Quad-core \ Plug and play \ Support RDS, SWC,Carplay Android Auto Support etc. Certainly this one will works for your car and bring you joyful time with driving.

https://www.seicane.com/dvd-navigation-system-touch-screen-for-2009-2015-nissan-nv200-with-bluetooth-remote-control-tv-tuner-radio-s041786r

This car radio comes with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Build-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP etc.

Even though you don’t have a good sense of directions, under the guidance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you can easily know your current locations and find the right way to reach any locations you would like to go to. What’s more, thanks to this unit’s dual zone function, you can freely listen to car radio, USB or SD card music playback under GPS mode.

Additionally, under the wireless Bluetooth technology, without taking your hands off the steering wheel, you can connect your Bluetooth-enabled mobile phone to this car radio, so you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from phone music playlists.

Wish you like this unit and good luck to you.

Quick Install and Upgrade Tutorial for a 2008 2009 2010 2011-2015 Mitsubishi Lancer-ex GPS Navigation Bluetooth USB Radio Carplay

Posted on January 16, 2019 by john — No Comments ↓ 1,984 views

2008 2009 2010 2011 2012-2015 Mitsubishi Lancer-ex car radio after installation

If you would like to remove your factory radio and install a new car radio, what you need to do is to find out what features you need. And if your factory radio cannot be compatible with these features you are eager to, you can think about replacing your factory radio with a new aftermarket car radio. The following is a detailed 2008 2009 2010 2011-2015 Mitsubishi Lancer-ex car radio installation instruction from Seicane. If you also own the same or similar dashboard, you can refer to this instruction.

Here are four tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2008 2009 2010 2011-2015 Mitsubishi Lancer-ex car radio installation instruction

1. Before installation, please remove any CDs from the head unit, and then disconnect the negative from your battery.

2. Remove trim pieces to access original car radio as follows.

3. Remove hazard warning accessory.

4. Disconnect Ribbon Harness and wiring loom.

5. Remove car radio fascia, please gently and carefully pull upwards from left hand corner.

6. Remove the four screws that are holding the originalcar radio in place.

7. Gently take out the original car radio.

8. Remove theoriginal car radio’s wiring harness and antenna from the back of the car radio.

9. Remove the factory mounting brackets and install them on the new car radio.

10. Check all the accessories for the new Seicane car radio.

11. Connect the harnesses to the back of the new Seicane car radio.

12. Connect the Seicane car radio to your originalradio’s plugs.

13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14. Put the new Seicane car radio into the dash.

15. Put everything into their original place. All the installation is done.

Wish you can learn something useful from the above installation instruction. If you encounter any difficulties and don’t know how to overcome them, you can seek for advice from your dealer or a professional. Or during the installation, you can contact your dealer, communicate with someone experienced or turn to a professional technician. Anyway, before installation, it is essential for you to select an ideal car radio for your beloved car radio. If you have no ideas, you can refer to the following link which is a remarkable 2008 2009 2010 2011-2015 Mitsubishi Lancer-ex car radio from Seicane.

https://www.seicane.com/android-2008-2015-mitsubishi-lancer-ex-hd-touchscreen-gps-navigation-radio-with-fm-bluetooth-wifi-usb-1080p-video-mirror-link-obd2-rearview-camera-s04117

With this car radio installed in your car, you will freely get access to a wide range of practical and entertainment features, such as GPS navigation function, FM/AM radio, Bluetooth hands-free phone calls, Bluetooth streaming music, AUX function, file management, etc. Thus, this all-in-one car radio from Seicane can be taken as one of the most suitable replacements for your factory radio.

Under the guidance of turn-by-turn directions and voice prompts provided by the high-accuracy 3D GPS navigation system, you can easily know your current locations and find the right way to reach your desired destinations even you are driving around an unfamiliar place. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Through Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, Bluetooth hands-free phone calls and Bluetooth streaming music are both available for you, which can give you great convenience and enjoyment.

Wish you like this unit and good luck!

How to Upgrade and Install a 2015 Toyota Highlander Bluetooth Music GPS Navigation Mirror Link Car Radio

Posted on January 9, 2019 by john — 2 Comments ↓ 2,379 views

2015 Toyota Highlander Car Radio after installation

If you would like to embrace a brand new driving experience, you can carefully think about removing your factory radio and installing a new aftermarket car radio. While for the installation, you can refer to a related installation guide to help you. The following is a 2015 Toyota Highlander car radio installation guide from Seicane, which will help you gain a general understanding of the car radio installation. If you own the same or similar dashboard, you can refer to this guide carefully.

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2015 Toyota Highlander car radio installation instruction

1. The original car radio.

2. Use a plastic removal tool to remove the panel and frame around the A/C vent.

3. Use the plastic removal tool to pry the air conditioning vents and remove them.

4. Remove the screws that fixed the radio on the dashboard.

5. Gently take out the original car radio.

6. Disconnect the connectors and cables at the back of the radio.

7. Check all the accessories for the new Seicane car stereo.

8. Connect the harnesses to the back of the new Seicane car stereo.

9. Connect the Seicane car stereo to your original stereo’s plugs.

10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car stereo into the dash.

12. Put everything into their original place. All the installation is done.

Above is the installation guide for a 2015 Toyota Highlander car radio. Wish you can learn some skills from it. If you have any doubts, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or if you still think it hard to install the new car radio, you’d better go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. For the selection of an ideal car radio, if you have no ideas, you can refer to the following link which is a remarkable 2015 Toyota Highlander car radio from Seicane.

https://www.seicane.com/2015-toyota-highlander-android-gps-navigation-system-touchscreen-radio-bluetooth-obd2-dvr-rearview-camera-tv-1080p-4g-wifi-mirror-link-steering-wheel-control-s18t222

This car radio’s operation has been upgraded to the intelligent and stable Android 6.0 operation system and it has a powerful quad-core CPU processor. And this smart car radio also comes with a wide range of practical and entertainment features, so it can almost meet most of your different needs in car.

With the assistance of the worldwide real-time GPS navigation system of this car radio, you are able to know your current locations and have the most suitable route option to arrive at your destinations. And while navigating, you can freely listen to your favorite music to relax yourself thanks to this unit’s dual zone function.

Through the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you are able to dial, answer, reject and mute Bluetooth hands-free phone calls as well as enjoy Bluetooth streaming music. So you can gain a lot of convenience and enjoyment.

What are you waiting for? If you like this unit, just add it to your shopping cart right now.

Quick Install and Upgrade Tutorial for a 2009-2014 Toyota Highlander GPS Navigation Bluetooth USB WIFI Car Radio Unit

Posted on December 29, 2018 by john — No Comments ↓ 2,150 views

To enjoy more convenience and enjoyment in car, it is wise of you to think about removing your factory radio and installing a new aftermarket car radio. The following is a 2009-2014 Toyota Highlander car radio installation instruction from Seicane. If you own the same or similar dashboard and would like to upgrade your factory radio, you can refer to the instruction carefully. Wish you can learn something useful from it.

2014 2015 Toyota Highlander car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009-2014 Toyota Highlander car radio installation instruction

1. Carefully pry lower dash panel out.

2. Grip onto the A/C control panel, and give it quick tug to remove.

3. Gently pry out air vent and bazel above the radio.

4. There are four 10mm bolts to be removed.

5. Remove these four 10mm bolts with a screwdriver.

6. Gently pull the radio out of the dashboard.

7. Disconnect the connectors and cables at the back of the radio.

8. Check all the accessories for the new Seicane car radio.

9. Connect the harnesses to the back of the new Seicane car radio.

10. Connect the Seicane car radio to your original radio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place.

Wish the above installation instruction can be helpful for you to some degree. If you have any problems, you can contact your dealer, communicate with someone experienced or ask a professional for help. If you still think it hard to finish the whole installation process on your own, you can directly go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. Besides, if you don’t know how to select an ideal car radio for your car, here I would like to recommend an amazing 2009-2014 Toyota Highlander car radio from Seicane to you. For more details, please click:

https://www.seicane.com/seicane-s121012-android-sat-nav-in-car-dvd-system-2008-2014-toyota-highlander-with-cpu-3g-wifi-am-fm-radio-bluetooth-music-mirror-link-obd2-backup-camera-dvr

This powerful 2009-2014 Toyota Highlander car radio comes with come with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP ,etc.

Even though you are not good at identifying directions, under the guidance of turn-by-turn directions and voice prompts provided by the high-accuracy 3D GPS navigation system, you are able to easily locate where you are and navigate to any locations you would like to go to. Besides, this unit comes with dual zone function, which enables you to listen to your favorite music while navigating.

Additionally, under the wireless Bluetooth technology, without taking your hands off the steering wheel, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you to gain a lot of convenience and enjoyment as long as you connect your Bluetooth-enabled mobile phone to this car radio.

Wish you like this multifunctional car radio and good luck to you!

Quick Installation Instruction for a 2007 2008 2009 2010 Toyota OLD Corolla GPS Navigation Bluetooth Audio USB Radio Stereo

Posted on December 10, 2018 by john — No Comments ↓ 2,247 views

2007 2008 2009 2010 Toyota OLD Corolla GPS Sat Nav Bluetooth Car Radio after installation

There is no doubt that you may feel tired or bored if you have been driving for a long time, and in that case, you must want to refresh yourself. Under this circumstance, you can listen to your favorite music, watch TV programs or play videos in your car. And your factory radio may not support these entertainment features, so you can consider replacing your factory radio with a new aftermarket car radio. The following is a 2007 2008 2009 2010 Toyota OLD Corolla car radio installation guide from Seicane. If you own the same or similar dashboard, you can refer to it carefully.

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2007 2008 2009 2010 Toyota OLD Corolla car radio installation guide

1. Remove the bottom panel (air conditioning) with plastic knife.

2. Pry the top of the original car CD panel with plastic knife.

3. Remove the four screws with a screwdriver.

4. Take the original radio out of the dash.

5. Pull the plug of the original radio.

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Socket docking with the original radio directly, instead of cutting the original plug off.

9. Put the original radio plug into our Seicane radio.

10. Put the new Seicane radio back into the dash.

11. Turn on the new Seicane radio to check if all functions work well. If it doesn’t, please check whether all the cables are connected correctly.

12. Install four screws and panels into their original place.

Wish you can learn something useful from the above installation steps. If you come across any problems you don’t know how to deal with, you can seek help from your dealer, someone experienced or a professional. If you still think it hard to install the new car radio, you can directly arrange a professional technician to install the new car radio.

While for the selection of an ideal car radio, if you have no ideas, you can check out the following link which is an amazing 2007 2008 2009 2010 Toyota OLD Corolla car radio from Seicane.

https://www.seicane.com/2007-2008-2009-2010-toyota-old-corolla-android-bluetooth-radio-gps-navigation-head-unit-support-wifi-1080p-video-backup-camera-audio-system-dvr-obd2-s0467

This all-in-one car radio is running on the stable Android 6.1 operation system and a powerful quad-core CPU processor to enhance its capabilities, configuration and performance, so it can be regarded as one of the best replacements for your factory radio. Besides, it also comes with a wide range or practical and entertainment features, mainly including built-in 3D GPS navigation, Bluetooth hands-free phone calls, Bluetooth streaming music, FM/AM radio tuner, file management, USB or SD card connection, etc.

With the assistance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you are able to locate where you are and navigate to your desired destinations. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

What’s more, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you to gain more convenience and enjoyment.

If you like this unit, just add it to your shopping cart.

How to Quick Install and Upgrade a 2011 2012 2013 2014 BMW X5 E70 /X6 E71 CIC GPS Navigation Bluetooth Carplay Audio Radio

Posted on November 26, 2018 by john — 16 Comments ↓ 9,694 views

2011 2012 2013 2014 BMW X5 E70 X6 E71 CIC Car Stereo after installation

If you are not satisfied with your factory radio, it is suggested that you should think about removing your factory radio and installing anew aftermarket car radio. To achieve the whole removal and installation process, it is helpful for you to refer to a detailed installation instruction. The following is a 2011 2012 2013 2014 BMW X5 E70 /X6 E71 CIC car radio installation instruction from Seicane, which can be taken as your reference.

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2011 2012 2013 2014 BMW X5 E70 /X6 E71 CIC car radio installation instruction

1. Press the button that indicated so as to open the glove box.

2. Use a pry tool to pry loose the air vent dash trim.

3. Pull out the air-conditioning vent and disconnect the plugs connected behind it.

4. Then you are going to come the side and pull out the one switch for the actual glove box compartment.

5. Use a screwdriver to remove the two screws that fix the original car radio dash trim.

6. Remove two clips that are behind this radio face.

7. Remove four screws that fix the original car radio and pull it out from the dash. Then unplug the connectors and wires behind the car radio.

8. Unscrew the screws that fix the original display screen and then remove the screen.

9. Disconnect the connectors at the back of the screen.

10. Check all the accessories for the new Seicane car radio.

11. Connect the harnesses to the back of the new Seicane car radio.

12. Connect the Seicane car radio to your original radio’s plugs.

13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14. Put the new Seicane car radio into the dash.

15. Put everything into their original place. All the installation is done.

Don’t worry if you encounter any problems before or during the installation. To fully solve the problems, you can try to contact your dealer, communicate with someone experienced or turn to a professional for help. Or if you are afraid of making damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. Anyway, before installation, it is very vital for you to select an ideal car radio for your car. If you don’t know which kind of car radio can fit your car, you can refer to the following link which is a remarkable 2011 2012 2013 2014 BMW X5 E70 /X6 E71 CIC car radio from Seicane.

https://www.seicane.com/android-hd-touchscreen-car-stereo-radio-for-2011-2012-2013-2014-bmw-x5-e70-x6-e71-cic-head-unit-gps-navigation-bluetooth-phone-music-wifi-support-usb-steering-wheel-control-backup-camera-s028225

There is no doubt that with this great car radio installed in your car, your driving experience will be taken up a notch naturally. This car radio comes with a wide range of practical and entertainment features, which meets almost all your needs in car.

With the assistance of the worldwide real-time GPS navigation system of high precision, you are allowed to easily locate where you are and accurately find the right way to get to reach any locations you would like to go to according to the turn-by-turn directions and voice prompts. And this car radio’s dual zone function enables you to listen to your favorite music while navigating, and the music will automatically switch to GPS voice.

Additionally, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, without taking your hands off the steering wheel for a long time, you are enabled to dial, receive, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone music playlist.

Wish you like this car radio. Good luck!

A Quick Installation Instruction for a 1998 1999 2000 2001-2006 BMW E53 X5 Aftermarket Radio Car GPS Navigation System

Posted on November 14, 2018 by john — No Comments ↓ 3,235 views

1998 1999 2000 2001-2006 BMW E53 X5 car radio after installation

If you would like to effectively improve your driving experience, it is a wise choice for you to replace your factory radio with a new aftermarket car radio. And to reduce some budget on upgrading, you can try to deal with the installation all on your own. The following is a 1998 1999 2000 2001-2006 BMW E53 X5 car radio installation instruction. If you own the same or similar dashboard, you can take this instruction as a reference.

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts (Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professionals.

7. For your convenience, here are the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

1998 1999 2000 2001-2006 BMW E53 X5 car radio installation instruction

1. Original Dash.

2. Remove the CD decorative frame with a tool.

3. Remove the four screws with a screwdrivers.

4. Withstand the bottom(arrows) with a tool.

5. Remove the conditioning air outlet.

6. Stick the paper well.

7. Cut along the RED LINE.

8. After Cutting.

9. Remove the original Blue Plug and White Plug.

10. Find out the AUX Jack(3Pins).

11. Take out the device and locked well the holder in the base with a PA2.6*8 screw.

12. Plug well the Power Harness/ USB Cable/GPS Antenna.

13. Install well the monitor in the dashboard and locked well.

14. Fixed well the holder in the bottom of the air conditioning with TM 5.0X14MM screws.

15. Plug the original AUX with Android AUX Jack.

16. Connect Android Black Plug into Original Blue Socket.

17. Connect original Blue Plug into Android Black Socket.

18. Full test all the functions.

19. Switch to “AUX MODE”, Android will have sound from original speakers.

20. Installation Effect.

Above is the whole removal and installation steps about a 1998 1999 2000 2001-2006 BMW E53 X5 car radio. If you meet any problems you cannot deal with independently, it is suggested that you should contact your dealer, communicate with someone experienced or turn to a professional for help. If you are afraid of making damage to either your car radio or your car, you can refer to the following link which is a remarkable 1998 1999 2000 2001-2006 BMW E53 X5 car radio from Seicane. For more details, please click:

https://www.seicane.com/android-1998-2006-bmw-e53-x5-car-stereo-radio-head-unit-gps-navigation-system-bluetooth-support-usb-wifi-rearview-camera-steering-wheel-control-s028205

If you get this remarkable car radio installed in your car, you will be able to get access to a wide range of practical and entertainment features, so that you will get a wonderful driving experience.

With the assistance of the worldwide real-time GPS navigation function of this unit, you can easily locate where you are currently and gain the optimal route option to get to your desired destinations according to the turn-by-turn directions and voice prompts. And what you cannot ignore is that this unit comes with dual zone function,

Additionally, without keeping your hands off the steering wheel control, you are able to dial, answer, reject and mute Bluetooth hands-free phone calls for convenience as well as listen to Bluetooth streaming music from your phone music playlist for enjoyment.

What are you waiting for? If you like this unit, just add it to your shopping cart.

The Easy-to-understand Installation Instruction on a 2009 2010 2011 2012-2015 BMW X1 E84 Car Radio with DVD Player Bluetooth GPS Navigation System

Posted on November 7, 2018 by john — No Comments ↓ 2,715 views

2009-2015 BMW X1 E84 car radio after installation

If you would like to improve your driving experience, you can think about removing your factory radio and installing a new aftermarket car radio. While as for the installation, you can search online for a related car radio installation instruction to help you with the installation. The following is a 2009 2010 2011 2012-2015 BMW X1 E84 car radio installation instruction from Seicane, which will provide you with a general understanding of car radio installation. If you own the same or similar dashboard, you can take this instruction as a reference.

Here are some tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

2009 2010 2011 2012-2015 BMW X1 E84 car radio installation instruction

1. The original dash.

2. Use a plastic pry tool to loose the panel along with the air vent, and then remove this panel.

3. Open the panel and disconnect the harzard light,door lock and other connectors at the back.

4. Remove the two screws that fix the top panel and then remove this panel.

5. Pop out the panel around the gear shift and then remove this panel.

6. Unplug the connectors at the back of the climate control.

7. Unscrew the screws that are holding the radio and then gently remove it.

8. Disconnect the connectors or cables at the back of the car radio.

9. Check all the accessories for the new Seicane car radio.

10. Connect the harnesses to the back of the new Seicane car radio.

11. Connect the Seicane car radio to your original radio’s plugs.

12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane car radio into the dash.

14. Put everything into their original place. All the installation is done.

Wish the above installation steps can be helpful for your installation. If you have any problems, you can contact your dealer, communicate with someone experienced or turn to a professional . Or you can straightly go to a car radio upgrade center to arrange a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to carefully select an ideal car radio for your beloved car. If you have no ideas, you can refer to the following link, which is an amazing 2009 2010 2011 2012-2015 BMW X1 E84 car radio from Seicane.

https://www.seicane.com/android-2009-2015-bmw-x1-e84-hd-touchscreen-car-radio-head-unit-gps-navigation-bluetooth-support-rearview-camera-steering-wheel-control-usb-wifi-mirror-link-obd2-s028219

With this intelligent car radio installed in your car, almost all your needs can be met as long as you make full use of this unit’s practical and entertainment features.

Even you don’t have a good sense of directions, you won’t get lost thanks to this unit’s worldwide real-time GPS navigation system. According to the turn-by-turn directions and voice prompts, you can easily locate where you are and find the optimal route option to arrive at any locations you would like to go to. And this unit comes with dual zone function, which enables you to listen to your favorite music while navigating, and the music will automatically switch to GPS voice.
What’s more, through the Bluetooth connection between this unit and your Bluetooth-enabled mobile phone, you can freely dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone music playlists. So, you will gain a lot of convenience and joyfulness in the driving. Thus, you can get a lot of convenience and joyfulness in the driving process.

Wish you like this unit and good luck to you.

How to Install and Upgrade a 2010 2011 2012 2013-2015 KIA Sportage GPS Navigation Bluetooth CD DVD Radio Head Unit

Posted on October 30, 2018 by john — 12 Comments ↓ 12,209 views

2010 2011 2012 2013-2015 KIA Sportage car radio after installation

If your factory radio cannot satisfy you in car since it cannot be compatible with some upgraded features, you can think about replacing your factory radio with a new aftermarket car radio. This article aims to introduce how to remove the factory radio and install the new car radio in 2010 2011 2012 2013-2015 KIA Sportage, if you own the same or similar dashboard, you can carefully refer to the following installation steps, which may help with the installation.

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2010 2011 2012 2013-2015 KIA Sportage car radio installation instruction

1. The original car radio.

2. Uncover the screw covers on each corner and then remove the two screws with a screwdriver.

3. Adjust the steering wheel so as to release the panel on the left side of the radio and then remove it. Don’t forget to disconnect the connectors at the back.

Adjust the steering wheel so as to release the panel on the left side of the radio and then remove it. Don't forget to disconnect the connectors at the back — Adjust the steering wheel so as to release the panel on the left side of the radio and then remove it. Don’t forget to disconnect the connectors at the back

4. Remove the panel on the right side of the radio with a plastic removal tool.

5. Remove two screws that fixed the radio panel, then remove the panel and unplug the connector at the back.

6. Remove four screws that are holding the radio on the dashboard.

7. Take out the original radio and unplug the connectors at the back of it.

8. Check all the accessories for the new Seicane car stereo.

9. Connect the harnesses to the back of the new Seicane car stereo.

10. Connect the Seicane car stereo to your original stereo’s plugs.

11. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car stereo into the dash.

13. Put everything into their original place. All the installation is done.

Wish you can learn some skills from the above installation instruction. If you meet any difficulties and don’t know how to overcome them, please feel free to contact your dealer, communicate with someone experienced or turn to a professional technician for help. If you still think it hard to install the new car radio, you can directly go to a car radio upgrade center to have the car radio installed by a professional technician.

Anyway, before installation, please carefully pick an ideal car radio for your beloved car. Here I’d like to share a remarkable 2010 2011 2012 2013-2015 KIA Sportage car radio from Seicane with you. Fore more details, please click:

https://www.seicane.com/hd-touchscreen-radio-for-2010-2015-kia-spotage-android-with-gps-navigation-audio-system-bluetooth-music-usb-aux-wifi-1080p-tv-mirror-link-dvr-s0495

This car radio is loaded with the stable Android 6.0 operation system and a powerful quad-core CPU processor, therefore, with this car radio installed in your car, you will embrace a much smoother, faster and easier operation experience.

There are a wide range of practical and entertainment features being offered by this all-in-one car radio, mainly including 3D GPS navigation system, FM/AM radio, Bluetooth hands-free phone calls, Bluetooth streaming music, AUX function, file management, etc.

Under the wireless Bluetooth technology, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, without taking your hands off the steering wheel, you are able to dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone.

What are you waiting for? This unit is at a competitive price now. If you like it, just add it to your shopping cart.

Car DVD

How to Install and Upgrade a 2009 2010 2011 2012-2016 NISSAN NV200 GPS Navigation Bluetooth Mirror Link Carplay USB SD Head Unit

Quick Install and Upgrade Tutorial for a 2008 2009 2010 2011-2015 Mitsubishi Lancer-ex GPS Navigation Bluetooth USB Radio Carplay

How to Upgrade and Install a 2015 Toyota Highlander Bluetooth Music GPS Navigation Mirror Link Car Radio

Quick Install and Upgrade Tutorial for a 2009-2014 Toyota Highlander GPS Navigation Bluetooth USB WIFI Car Radio Unit

Top Tutorial on the Removal and Installation for a 1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 GPS Navigation USB WIFI Carplay Car Stereo Unit

Quick Installation Instruction for a 2007 2008 2009 2010 Toyota OLD Corolla GPS Navigation Bluetooth Audio USB Radio Stereo

How to Quick Install and Upgrade a 2011 2012 2013 2014 BMW X5 E70 /X6 E71 CIC GPS Navigation Bluetooth Carplay Audio Radio

A Quick Installation Instruction for a 1998 1999 2000 2001-2006 BMW E53 X5 Aftermarket Radio Car GPS Navigation System

The Easy-to-understand Installation Instruction on a 2009 2010 2011 2012-2015 BMW X1 E84 Car Radio with DVD Player Bluetooth GPS Navigation System

How to Install and Upgrade a 2010 2011 2012 2013-2015 KIA Sportage GPS Navigation Bluetooth CD DVD Radio Head Unit

Categories

Recent Posts

Pages

Recent Comments

Views

Archives

Meta

Blogroll

November 2024
M	T	W	T	F	S	S
« Sep
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30

Categories

Recent Posts

Pages

Recent Comments

Views

Archives

Meta

Blogroll

Tags