Home › Archive for Car stereo › Page 4

Car stereo

The necessary 13 steps of installation guide of an Android Car Screen in 2009-2015 BMW X1 Series E84 CIC System

Posted on by — No Comments ↓ 963 views

It has been proven to be popular that replacing a new touch screen car stereo for the old vehicle’s stock stereo these years. As long as you have the experience before for a similar car radio system, you will finish this complex procedures with just a few minutes by your hands and some useful tools. But for the most beginner who tried to set up this installation by themselves, it is never too late to start to learn some effective skills and read some steps to finish it smoothly. And the following 13 steps is a necessary installation guide of BMW X1 E84 2009-2015 CIC Radio which can help them to understand the difficult points during the installation as the reference.

Before installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

Installation guide of BMW X1 E84 2009-2015 CIC Radio

1.Lever marked console assembly,the outer frame of AC control and the frame of DVD part

2.Lever right and left trim, let the gap towards on both sides

3.Pull the whole frame out and take off the 4 screws as reveal

4.Pull out DVD(Notice that there are 2 places might be obstacles) and disconnect the wiring shown in the picture

5.Lever AC vent assembly and disconnect the wire.

6.Lever the screen outer frame and remove the frame

7.Remove the screws on both right and left sides.

8.Pull out the whole original screen and Unplug wires as reveal

9.Remove the the optical fiber connector and Put the fiber connector into the new wire

10.Connect original cable with new main cable and plug the cable to the DVD.

11.Put original DVD back and connect new wires with OEM connectors

12.Install new car touch screen and Fix the screws

13.Plug AUX connector and Re-install the decorative panel.

If you read the above steps with enough patience, you can finish this job easily even as the one who has no experience before with just a few time. But if you still have problems during the whole installation, you can ask a professional for help or consult your car dealer who can offer the excellent advice to you. And if you still think it is too hard for you, there are plenty of online services and companies available, here is a recommended online link of BMW X1 E84 2009-2015 CIC Radio from Seicane. You can check more details from it.

This car stereo is running on the latest Android 10.0 operation system. With 1.8Ghz and 8-core CPU, you can have the most stable and fast response during the driving. And the special 16EQ DSP Settings, you can enjoy high quality sound effect as well.

With bluetooth carplay and large CPU memory inside the radio, you can freely enjoy phone applications and the smooth operation on the driving way. What’s more, it is safer for you to have phone calls and listen to music as it can provide the advanced services . After installing a DVR, you can also record every moment in your journey and never miss anything at the same time.

Compared to the other screen, this IPS screen comes with high resolution, providing clearer image and stronger sense of hierarchy. And with a more realistic and transparent new screen color and higher visual angle, it can support multiple popular videos.

It is the most fashionable and safest choice for you if you want to find the new car stereo online. Just click it and don’t miss this chance.

For 2013-2016 BMW 3 Series F30 F31 F34 F35 Factory Radio Upgrade Guide

Posted on by — 2 Comments ↓ 2,076 views

Instead replacing the whole car radio system, lots of BMW owners would rather than choosing to change the radio screen, which is indeed a quick and easy way to upgrade the factory radio system in recent years.

As a professional supplier of aftermarket car radio GPS system, Seicane not only produces quality radio system for various car models, but provides comprehensive installation guides for car owners. And here is a detailed guide to install an upgraded android radio screen unit in 2013-2016 BMW 3 Series F30 F31 F34 F35. Hope it be useful for you.

  • Tools: Plastic pry tool, screwdrivers.
  • Note: Cut off the car power during the installation process to ensure safety.

The original car radio system

Step 1, Removing the A/C vent panel. We need to start this from the co-pilot position. Use the plastic pry tool to pry the panel, then take down the whole vent panel and disconnect the plug.

Step 2, Next we go to remove the trim panel at the bottom of the radio system. Still need to pry it, then take it down and unplug the connector.

Step 3, Remove screws that fixed the button panel. Take down the panel and disconnect the plugs.

Step 4, Remove screws that fixed the original radio screen, take it down and unplug its connectors.

Step 5, Remove screws that fixed the original CD unit, take out the unit and unplug the connectors.

Step 6, Have a check for the new car radio screen unit to make sure everything of it in good condition.

Step 7, According to the radio user manual, correspondingly connect the new wiring harness to the car.

Step 8, Connect the new screen to the car.

Step 9, Connect the original CD unit.

Step 10, Test the new radio system. If it works normally, install all the car parts back. If there is problem, check again the wiring condition.

Key features of Seicane upgraded radio screen for BMW models

  • The 10.25” IPS screen can greatly improve your viewing experience when watch videos and use navigation.
  • Equipped with the latest Android system, it provides stable operation and performance.
  • It supports all original car functions, keeping you comfortable using experience.
  • There are built-in Bluetooth and microphone, so you can use Bluetooth to call and listen to music.
  • It’s able to support Carplay, just connect your phone to the radio with a Carplay USB dongle, then you can use phone applications freely, being the best way to play phone while drive safe on the road.
  • You can also add DVR, rear view camera, TPMS and so on to help increase driving safety as they are supported by this Android radio screen.

Car Stereo Head Unit Upgrade Guide for 2009-2017 Audi Q5

Posted on by — 2 Comments ↓ 5,638 views

Not every car is equipped with good car stereo which provides amazing sounds and more functions. If you’re someone who likes to play their music loud or enjoys more fun, it may be time to look into upgrading your car stereo system.

Nowadays you can easily find thousands of external car stereos in the market, and with various installation guide on the Internet, you are able to finish the installation yourself.

Below is a guide to upgrade 2009-2017 Audi Q5 radio, if you are the owner of Audi Q5, you may get help from here.  

Steps to remove and install the radio

Step 1, Pry to open the trim panel of the screen, remove the panel, and unplug the connectors.

Step 2, Remove 4 screws that fixed the screen, take out the screen, and unplug its connectors.

Step 3, Pry to open the A/C outlet, take down the outlet, and disconnect the plugs.

Step 4, Pry to remove the A/C button panel, take it down and unplug the connectors.

Step 5, Remove 4 screws that fixed the CD unit, pull it out and disconnect the plugs.

Step 6, The removal of Audi Q5’s based stereo is finished now. While before you installing the Seicane car stereo head unit, you should check the product and accessories in good condition.

Step 7, Take a look at the user manual to distinguish cable interfaces when you are not sure how to do, then correspondingly connect the new wiring harness to the car plugs.

Step 8, Connect the original CD unit and install it back to the dashboard.

Step 9, Install the screen bracket, connect the Seicane stereo screen unit, and tighten the screws to fix it.

Step 10, Power on the car to test the new radio system. If it functions normally, install all car parts back; if there is problem, check the wiring conditions.

Features of Audi Q5 2009-2017 Radio from Seicane

This car radio head unit is designed with a 12.3” large touchscreen which is easy to use and make you see information clearly. In addition, it comes with high hardware configuration including intelligent pure Android 10.0 operation system, 8-core 2.0 GHz Cortex-A53 processor, 4GB RAM and 64GB ROM, so that it offers stable performance and fast response.

When it comes to amusement, you are provided with numerous choices. Playing music, watching videos, listening radios, surfing the Internet etc. are basic functions. What’s more, the Carplay supported feature allows you to use phone applications freely and conveniently.

Apart from adding more fun to your drive, the product also helps increase driving safety. For example, it supports external backup camera, with clear rear images captured by this camera, you’ll park car easily. There is an ADAS Collision Warning Recorder in the car stereo system, this can monitor the road conditions ahead in real time, thus keep you safe drive.

How to Install Seicane H826 Touchscreen Radio System for 2001-2008 BMW 7 Series E65 E66?

Posted on by — No Comments ↓ 678 views

Installing an upgraded radio screen in BMW 7 Series is not so difficult. I am sure the new radio screen do make differences in your drive. If you are planning to upgrade your BMW’s basic radio screen, take a look at this installation guide, you may get some tips from it.

Tools: Plastic pry tools, screwdrivers.

Note: Make sure the car power is off before working.

The original car radio system.

Step 1, Pry to open the front cover plate of the radio screen, then remove the cover plate.

Step 2, Remove 3 screws that fixed on the top of the radio screen, then pry to remove the radio screen, unplug its connector.

Step 3, Remove screws that fixed the A/C outlet panel; Pry to open the outlet panel from the side of co-pilot.

Step 4, Take down the whole A/C outlet panel and unplug the connector.

Step 5, Remove screws that fixed the original CD unit, take it down and disconnect its plugs.

Step 6, Pry to remove the metal sheet on the back of the original radio screen, then disassemble the screen and frame, and unplug the cable.

Step 7, Use new cable to assemble the frame on the new radio screen.

Step 8, Connect new wiring harness to the car plugs, then connect new radio screen and original CD unit.

Step 9, Start the car to test whether the new radio system can work normally, if there is no problem, install all the car accessories back; if there is something wrong, check whether the cables are correctly connected.

Know about Seicane car stereo GPS navigation system for BMW 7 Series E65 E66 2001-2008

It’s an 8.8” IPS screen system integrated with various functions including radio, music and video playing, Bluetooth, GPS navigation etc. It also supports the original car functions to keep you comfortable using experience. Besides, it supports Carplay, giving you the ability to freely enjoy your smartphone Carplay function on the radio display.   

On the other hand, the product is able to support external car cameras such as DVR, rear view camera and so on. With the DVR, you can record everything of traffic accident, providing accident liability certificate. While a rear view camera can show you clear rear images whenever you park and reverse the car, so that you park the car easier and more convenient.  

Choosing Seicane, you never regret!

How to Replace (2006-2013) BMW Mini Cooper Radio with a Touchscreen Bluetooth Car Stereo System?

Posted on by — 2 Comments ↓ 9,374 views

BMW’s Mini Cooper is one of popular models loved by many people. It has a sense of design regardless of its external shape or internal situation, while the radio system is one of amazing design.

Normally, the original car radio of BMW Mini Cooper is the combination of a large circular display meter and button-operated CD player, which in fact is with simple function and no special feature. With the innovation of car stereo technology, now we can find many new car stereos that come with various features and functions in the market to upgrade the old radio. This post is about how to remove old radio and install a touchscreen multifunctional radio in the (2006-2013) Mini Cooper. Let’s check whether you can do it yourself.

The original car stereo system.

The removal and installation steps

Preparation: New car stereo system (the one we used is a Seicane Android car stereo navigation system). Tools include plastic pry tools, screwdrivers. Power off the car before moving anything.

Step 1, Remove the two plastic pieces from the top air outlet

Step 2, Remove the fixing screws inside (one on each side)

Step 3, Use a pry tool to pry open the trim panel at the instrument position of the steering wheel, keep it loose.

Step 4, Press to open the right trim panel (arrow) by hand, and pry to remove the small plastic sheet (circle) at the right air vent position.

Step 5, Remove the fixing screws on the left and right sides of the air vents, take down the frame structure, and disconnect the plug.

Step 6, Remove all the screws that fix the trim board shown in the picture to make it loose.

Step 7, Pry to remove the fixed panel on the right side of the radio system.

Step 8, Unscrew the screws that fix the panel under the steering wheel, remove the panel.

Step 9, Then pry to remove the fixed panel on the left side of the radio system.

Step 10, Remove screws that fixed the start button panel to make it loose.

Step 11, To remove the button panel of the radio system: Firstly, remove the fixing plastic sheet at the bottom of the panel and unscrew the screw inside; Then unscrew the screws that fix the whole button panel on the left and right sides; Take out the panel and unplug its all connected plugs.

Step 12, Remove all the screws that fix the display meter and the CD player.

Step 13, Take down the display meter and the CD player, unplug all the connectors.

Step 14, Remove the black frame that fixed the display meter and the CD player. The frame will be used for the new stereo system.

Step 15, Check the wiring harness and other accessories of the Seicane car stereo system.

Step 16, Fix the screen and CD unit of the new car radio system with the black frame.

Step 17, Use the new cables to connect the new radio system (screen and CD unit) to the car. Being carefully and taking a look at the radio user manual will be great help.

Step 18, Next, turn on the car to test the working condition of the new car radio system.

Step 19, If it is confirmed that the new stereo system is working normally, install all the original car accessories including screws and panels back. If there is problem, check again the wiring condition to see if ok.

Brief introduction of Seicane car stereo navigation system

It comes with a 7 inches touchscreen that easy to operate and see information clearly. The most fantastic design of the product is it can support the fuel consumption display and Harmon Kardon Sound System, so it’s easy to plug and play for the installation.

With this multifunctional car radio, whenever and wherever you drive, you’ll get lot fun on the road. Not only can you listen to music, receive radios channels, you can also watch videos, surf the Internet via 3G/WIFI network. Most importantly, you won’t get lost by checking the latest navigation information to your destination provided by this radio. Besides, it helps you drive safer. For example, making Bluetooth calls instead of answering the phone with your hands; Easily to park and reverse the car with the help of rear images shown on display when there is rear view camera connected to the radio system.

In short, this Seicane Bluetooth car stereo system help improve your driving experience.

Seicane Touchscreen Radio System to Upgrade BMW X1 F48 2016-2017 NBT System

Posted on by — No Comments ↓ 1,318 views

Perhaps for many people, owning a BMW is one of their life goals. This is also my dream, and it’s worth celebrating that I finally got a BMW ten months ago, even it’s just a second-hand 2016 BMW X1 F48. I love it so much and often drive it for picnic, camping, road trips etc.

A few weeks ago, I made up my mind to make my BMW better, while the first thing I done was to upgrade the original radio screen. I just finished the installation with the help of my brother last week. You can find all the instructions in following content. 

After doing some researches online, I purchased the Seicane touchscreen android radio system for my car. To do the installation, we need to prepare plastic pry tools and screwdrivers. Below is the original radio system of my car.

Part 1, Removal

Step 1, Use the plastic pry tool to remove the button panel.

Step 2, Take down the button panel, disconnect the plugs.

Step 3, Remove screws that fixed the CD unit, take out the unit, and unplug the connectors.

Step 4, Pry the A/C vent panel, take it down and unplug the connectors.

Step 5, Remove screws that fixed the car radio screen, take down the screen and disconnect the plugs.

Part 2, Installation

Step 6, Before the installation, have a check for the wiring harness of the Seicane radio screen system to make sure everything is good. Also have the radio user manual in your hand to avoid inconvenience.

Step 7, Use the new wiring harness to connect the car plugs and the original CD unit.

Step 8, Install the CD unit to the dashboard.

Step 9, Connect the new radio screen and install it back. Then turn on the car to test the new radio system. If it works well, you can move to Step 10; If there is problem, please check whether the cables are connected correctly.

Step 10, Install the A/C vent panel back.

Step 11, Install the button panel back. The whole installation done.

Seicane touchscreen radio system for BMW X1 F48 2016-2017 NBT System provides with you plenty of amazing features and functions. The 10.25 inches IPS touchscreen is designed with exquisite look and 1280*480 resolution, giving you a very smooth and stable operation. Since the new radio system can support all the original car functions, you won’t have special troubles to use it, keeping you comfortable along the road.

The product also expands more functions. For example, it’s able to support Carplay, so you can use phone applications freely on the radio screen with this function. On the other hand, it also support rear view camera, and the rear images will help you park and reverse car easily. You will have a more happy drive with this Seicane radio navigation system.

How to Install An Apple Carplay Aftermarket Radio in Subaru WRX?

Posted on by — No Comments ↓ 1,176 views

Obviously, the application of Apple CarPlay or Android Auto provides drivers with the easiest and safest way to use their phones while driving. Just connect the phone to the car radio, drivers can use the phone apps at the radio screen easily, such as to use Siri and Apple Maps, select the tunes, make phone calls etc. And to achieve this, there should be a radio supporting Carplay in your car. If you still use a standard factory radio, it’s high time for you to install an Apple Carplay aftermarket radio in your car. At this post, we’re going to assist you to replace your Subaru WRX factory radio by yourself.

Removal and installation steps of Subaru WRX radio

The tools for removal and installation are basic pry tools and screwdrivers. As to the new radio, it’s a touchscreen Seicane navigation radio with Carplay. Before working, it’s necessary to cut off the car power to keep safety since we will work on different power plugs.

Step 1, Remove the panel device: Use the pry tool and feed it down the side until the panel device pried up, then you can take it out.

Step 2, Unplug connects of the vent and the AC controllers on the panel device.

Step 3, Remove the tabs, vents, AC controllers of the panel as we need to use them on the new aftermarket radio.

Step 4, Remove six screws that fixed the original radio unit.

Step 5, Take down this metal slat, pull out the radio unit and unplug its connectors.

Step 6, Have a check for the cables and other accessories of Seicane car radio with Carplay.

Step 7, Install the tabs, vents, AC controllers in the new radio system.

Step 8, Correspondingly connect the harness cables between the new radio and the car. If you are not sure about the interfaces, check with the radio user manual.

Step 9, Turn on the car to test whether the new radio can work normally; if not, check again the cables whether connected correctly.

The Seicane aftermarket car radio with Apple Carplay

Since the product comes with a 9 inches large touchscreen, everything you do on it is easier and more convenient. There is comfortable and clear navigation UI for you to see information, allowing you to go everywhere quickly and safely. With the built-in DSP sound system, you are able to enjoy quality sound effects when listen to music, watch videos etc.

In Seicane Apple Carplay aftermarket radio, there are two methods of using Carplay, by wired and wireless, both are easy to do, giving drivers new way to use their phones while keeping a safe drive. With this fantastic design, you get to make phone calls, use phone maps, enjoy phone songs on radio screen freely.

The Seicane radio also helps increase driving safety when you add DVR, rear view camera, TPMS and so on to it. The DVR can record the whole process of traffic accidents, take photos for front of vehicles and store the video in real-time while driving. After installing the rear view camera, the radio screen will automatically display rear situation when you reverse the car, to assist you park it easily. The TPMS can report real-time tire-pressure information via a pictogram display or a simple low-pressure warning light to help you save fuel consumption, extend the tire life.

For Toyota Camry Radio Removal and Installation Guide

Posted on by — No Comments ↓ 3,114 views

More and more drivers have upgraded their cars’ factory radios because some of cars only come with a standard radio with less functions that can’t meet drivers’ needs. Today, we’d love to share a guide of how to remove and install aftermarket car radio navigation system in the Toyota Camry. Check at this guide to decide whether you want to replace the radio by yourself.     

Detailed steps of removal and installation for Toyota Camry radio

The basic tools are screwdrivers, plastic pry tool, and we recommend to install the Seicane android car radio system. For safe work, cut off the car power firstly.  

Step 1, Remove the two side panels with your hands.

Step 2, Remove these two screws at first. 

Step 3, Power your vehicle to set up the emergency brake, then we need to remove this plastic handle. Just use your hands to remove it. Don’t forget to cut off the car power again after this step.  

Step 4, Take out the container panel with your hands.

Step 5, Next you need to remove the whole container structure.

Step 6, Now we can remove this part as we have loosen the screws at Step 2, and you need to unplug the connectors.

Step 7, At this time, we go to remove the vent. Use a plastic tool to pry the vent and plug the connector.

Step 8, Following we are planning to remove the whole radio system. You can find that there are four screws we need to remove, two at upper inside, two at bottom inside.

Step 9, After removing the four screws, we can take down the whole radio system, also unplug its connectors.

Step 10, And we need to remove these three control buttons of the old radio, in order to install them on the new radio.

Step 11, The removal of the original radio is finished, we are ready to install the new Seicane car radio navigation system. Firstly, have a check for the cables and accessories of the new radio.

Step 12, This step will require your patient and carefulness to connect the cables between new radio and car plugs, so have your user manual handy will be helpful.  

Step 13, After connecting the cables, you are advised to turn on the car and test the new radio. If it works well, then you can put everything back; If not, check whether you connect the cables correctly.

So now are you ready to work for this? For more information on the radio installation of other cars, visit the Seicane blog, you will get help.  

Take a look at Seicane car radio for Toyota Camry

Important parameters: Android 10.0, 4G in RAM and 64G in ROM, with 8-core CPU and a high resolution 10.1 inches touchscreen, keeping stable performance and smooth operation.

Main features and functions: Supporting 4G&WiFi network to allow you surf the Internet freely. Equipped with worldwide real-time navigation, taking you everywhere without trouble. Carplay is also supported, giving you a new method to play smartphone’s applications. In terms of music&radios and videos, they are the basic parts of this stereo system, you can enjoy countless music and videos when you are tired and bored. Just make sure you are safe driving.   

For more options: Adding a backup camera help ease your pressure in parking and reversing as the radio display can automatically switch to the rear image while reversing, so you can see the rear situation and park the car easier. You can also get the Car DVR, OBDII etc.  

It’s true that having a touchscreen car radio navigation system greatly improves driving experience.

An Easy Way to Upgrade Your Citroen C4L Factory Stereo

Posted on by — No Comments ↓ 184 views

To look for the comfortable and quality in-car life, some car owners sell their old cars to purchase a new one, while for those who can’t afford a new car now, are planning to upgrade their old car parts, such as the tires, the paint, the interior, and the factory stereo.

When it comes to fun in-car life, having a quality car stereo is must. With the multifunctional car stereo navigation system, you get various entertainment like listening to newest music and radio, watching some movies, using the navigation to arrive your destination, playing Carplay etc. And the stereo helps you keep safe drive when connect some car cameras to it.

Actually, upgrading the car stereo is not so difficult, we can do the job ourselves. In this article, we’ll tell you how to replace the Citroen C4L factory stereo.

Removal and installation guide of Citroen C4L stereo system

First of all, get your toolbox. A couple of screwdrivers and a plastic pry tool are most common. You can also prepare some wire strippers, electrical tape. Before the replacement job, make sure you cut off the car power to avoid accident.

1 Remove the plastic baffle under the radio system.

 

2 Use a plastic pry tool to remove the A/C outlet.

 

3 Take off the two trim panel around the radio screen.

 

4 Remove six screws which fixed the radio system.

 

5 Take off the radio and unplug its connectors.

 

6 Remove the two screws that fixed the host, then take off the host and unplug the connector.

 

7 Remove this frame that fixed the host.

 

8 Check whether all the accessories of the new car stereo navigation system are complete.

9 Corresponding connect the cables between the new car stereo system and the car.

10 Now you can turn on the car to test whether the new stereo is working normally.

11 If there is no problem, fix well the stereo and all the car accessories.

Why to upgrade your factory stereo?

If your car is new enough, I am sure it used the latest technology in the stereo. You don’t need to make any change to it. But for most old cars, they only come a standard factory stereo with simple functions and no special features. To enjoy better in-car life, it’s time to replace your factory stereo. Some of aftermarket car stereo systems are worth to buy as they are designed awesome.

Generally speaking, to provide users with best viewing angle and smooth operation, most of the aftermarket car stereos are made of large touch screen, so users are easily to operate every function with their fingers. On the other hand, there are more entertainment methods to choose in these stereos, such as connecting to the Internet, users are able to search the latest music or watch online movies. What’s more, for stereos who support Carplay, users can connect their smartphone to the stereo, then they can use the smartphone applications freely on the stereo display.

These multifunctional aftermarket car stereos are not just designed for entertainment, they also have the ability to provide safety to our drive. For example, with the navigation application, we find the best route to our destinations. Besides, when adding some car cameras such as the rear view camera to the stereo, every time when we reverse the car, it switch to the rear view image to show us the rear situation, then we can park the car easier.

What are you waiting for to upgrade your factory radio system? Find the suitable one to replace it now.

How to Choose Quality Car Navigation Stereo System?

Posted on by — No Comments ↓ 514 views

It is very important for “road idiots” to choose a useful GPS navigation stereo system for their cars. But for many people, there is very little understanding of car navigation, and there are many types of car navigation system on the market. In this post, we’ll talk about how to purchase a good navigation stereo system.

Things to consider when buying car navigation system

Choose a car navigation at the right price

There are many GPS-related products on the market, you should purchase them according to your own usage and budget. It is not a good thing to blindly pursue high-end products, yet it is your ability to buy the most cost-effective products.

At present, in terms of style and use, navigation are mainly divided into vehicle-mounted embedded and handheld portable. For price, product portability, entertainment, practicality, etc., the handheld portable navigation stereo system has certain advantages. There are many navigation brands on the market, such as Seicane whose price relatively affordable.

Check whether the maps in navigation system are practical

Generally speaking, the map often used by navigators is Google Maps, but some navigators cannot support the latest version of Google Maps. In fact, you also need to spend a certain amount of time to familiarize yourself with the operation of navigation software.

Pay attention to the screen size of the navigation

The size of the GPS navigation stereo system is mainly measured by the size of its screen. According to different car models, users can choose different sizes. GPS navigation is mainly to play its core navigation role when driving. The 9-inch navigator has the best visual effect on the car, and this also includes its MP3, MP4 entertainment and other aspects. Although many products have relative value-added services, some of the navigator system solutions with value-added service functions are not very mature. It is recommended that you do not rush to buy because at the meantime the price is high.

Know what other functions the car navigation system offer

In terms of functions, current navigation system mainly support Bluetooth, FM radio, video input, Carplay and so on. These functions require some settings, because at the beginning, everyone is not very good at using GPS stereo system, and needs guidance from the merchant.

Consider the search speed of navigation

A good navigator generally takes less than one minute to search, and some fake and inferior brand navigators take about two minutes to search, and some are even worse. After driving for more than ten minutes and almost reaching the destination, these bad navigation have not been searched. What a bad user experience.

Still pay attention to the navigation map

If the search speed of the map is fast, it indicates that there is a good configuration of the navigation. On the other hand, map apps are equally important, and easy-to-use maps are the key. In fact, each map has its own advantages. IGO and Google are both good. Pay attention to the genuine map.

Provide perfect after-sales service

Well-known companies of car navigation devices generally build a relatively blameless after-sales service system, such as Seicane, Alpine, etc., and consumers can enjoy satisfactory services. In some well-known companies, when the user’s navigator needs to be returned to the factory for repair, a spare device is also provided for the user to use.