Great Tutorial on a 2004 2005 2006 2007-2009 Mazda 3 Radio Removal to Install an Audio Stereo Sound System

2004 2005 2006 2007-2009 Mazda 3 Radio after installation

If you would like to pursue a more comfortable and convenient in-car life, it will be one of the most prevailing ways for you to replace your factory radio with a new aftermarket car radio which comes with a wide range of practical and entertainment features. If you know how to install a new ca rradio, you may find it very easy for you to upgrade a car radio. The following is a 2004 2005 2006 2007-2009 Mazda 3 car radio installation instruction from Seicane. If you own the same or similar dashboard, then you can refer to this instruction carefully.

2004 2005 2006 2007-2009 Mazda 3 Radio after installation
2004 2005 2006 2007-2009 Mazda 3 Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2004 2005 2006 2007-2009 Mazda 3 car radio installation instruction

1. Remove the trim panel with a plastic removal tool.

Remove the trim panel with a plastic removal tool
Remove the trim panel with a plastic removal tool
1-1
1-1

2. Remove two screws that fixed the car radio on the dashboard.

Remove two screws that fixed the car radio on the dashboard
Remove two screws that fixed the car radio on the dashboard

3. Take out the original car radio.

Take out the original car radio
Take out the original car radio

4. Unplug connectors at the back of the original car radio.

Unplug connectors at the back of the original car radio
Unplug connectors at the back of the original car radio
4-1
4-1

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car radio to your original radio’s plugs.

8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car radio into the dash.

10. Put everything into their original place. All the installation is done.

 

Now do you have a general understanding of the above installation steps? If you meet any problems about either the car radio installation process pr the car radio, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. You can straightly go to a car radio upgrade center and get the new car radio installed by a professional technician.

Besides, it is especially significant for you to pick an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is an amazing 2004 2005 2006 2007-2009 Mazda 3 car radio from Seicane. For more details, please click:

https://www.seicane.com/android-2004-2009-mazda-3-gps-navigation-car-radio-with-bluetooth-3g-wifi-usb-touch-screen-rearview-camera-mirror-link-obd2-s0477

With this car radio installed in your beloved car, you will definitely embrace a brand new driving experience so as to enjoy more convenience and enjoyment.

Under the guidance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you are able to easily locate where you are and navigate to any locations you would like to go to without getting lost any more.

Additionally, under the wireless Bluetooth technology, you can make your Bluetooth-enabled mobile phone pair with this car radio. By doing so, you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from phone without taking your hands off the steering wheel control.

Wish you like this unit and good luck to you!

8 comments on “Great Tutorial on a 2004 2005 2006 2007-2009 Mazda 3 Radio Removal to Install an Audio Stereo Sound System

  1. Do you have a cable that will allow this to work with the Bose speakers? It’s a great unit but doesn’t work with Bose and I’m having trouble getting it setup.

  2. hi do you have a cable to connect the original display because i can’t see the temperature setting and can’t controle it !! it’s a cable that came out the display unit. kind regards Jan

    • “Dear,
      so sorry for the inconvenience.
      In order to give you a fast solution,we suggest you asked our after sales staff for help.
      The email is Sales1@seicane.
      Have a good day!”

  3. I want to know if it works for 2009 Mazda 3 with Bose speaker. I had tried an after market product already and there was no sound . Is this problem addressed in this pdoduct?

    • “Dear,
      so sorry for the inconvenience.
      In order to give you a fast solution,we suggest you asked our after sales staff for help.
      The email is Sales1@seicane.
      Have a good day!”

  4. Ok got it now how to connect an aftermarket radio for 2007 mazda 3. Wanted to ash where can i buy it like SA around northwest or gauteng?

    • dear,
      you can buy directly from our website,we can ship to you there.
      Could you please send us the photo of your car’s dashboard to [email protected]?  
      And could you please tell us the model and year of your car?
      Then we can help you check if this unit can fit your car or not ,hope you could cooperate with us.
      Looking forward to hearing from you soon.
      Thank you & Best regards!

Leave a Reply

Your email address will not be published. Required fields are marked *