Here shows an advanced 2004-2012 Mercedes Benz A class W169 car stereo. It is an image after installing this Seicane Mercedes Benz A class W169 car stereo in the dashboard of the Mercedes Benz A class.
![2004-2012 Mercedes Benz A Class W169 car stereo after installation](https://www.seicane.com/blog/wp-content/uploads/2016/04/2004-2012-Mercedes-Benz-A-Class-W169-car-stereo-after-installation-300x205.jpg)
Some car owners have no idea about how to install an ideal stereo in their car. Actually, the installation is not too complicated. With some related experience and a correct installation guide, a new stereo can be easily installed within about half an hour. If you have a Mercedes Benz A class W169 and also have the same dashboard as above, then you can refer to this installation guide to help with the installation.
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
2004-2012 Mercedes Benz A Class W169 car stereo installation guide
- Detach the outer frame of the original CD player.
- Use a screw driver to remove the screws marked with red circles.
2. Use a screw driver to remove the screws marked with red circles - Remove the screw on the lower right.
- Remove the screw on the lower left.
- Remove the screw on the upper left.
- Remove the screw on the upper right.
- Use a screw driver to remove the screws marked with red circles.
7. Use a screw driver to remove the screws marked with red circles - Remove the original CD player.
- Insert the plug of the car into the socket of unit.
- Remarks:
10. Remarks a. Plug in the radio antenna. b. Plug in the GPS antenna
a.Plug in the radio antenna.
b.Plug in the GPS antenna.
11.Install the new Seicane stereo into the dashboard.
12.Fasten the new Seicane stereo with 4 screws and install the frame back.
13.Turn on the new Seicane stereo to have a comprehensive check.
Now you probably have a general idea about how to install a new stereo in your car. If you have anything hard to understand, please don’ t hesitate to ask your dealer or a professional. If you don’t have any experience on the installation, please have your new stereo installed by a technician.
What’s more, you need to ensure your new stereo can be compatible with your car, so that it can be perfectly installed in your car. If you don’t know which stereo can fit your car, you can refer to this hot-selling 2004-2012 Mercedes Benz A class W169 car stereo from Seicane, please click:
This intelligent Mercedes Benz A class W169 car stereo comes with the latest GPS navigation system, you can go anywhere you’d like at the help of the turn-by-turn directions and voice prompts. The compatibility of bluetooth allows you to wirelessly link your enabled mobile phone with this unit for hands-free calls and streaming music. There is also a backup camera input for you to connect a rearview camera to help you park more easily.
Wish you like this amazing Mercedes Benz A class W169 car stereo and have a wonderful time with it! Good luck to you!
I installed this unit to my car and now I wish to reset it to factory settings but it asks for a password which i didn’t add one to start with. Does anyone know the default password for this if there is one
password 126