With the most up-to-date car stereo in your car, you can enjoy much fun and enjoyment on all trips. But how do I upgrade the old factory radio? Do I have to go to the stereo upgrade center or professionals to upgrade the radio? Absolutely not. In fact, you just need a step-by-step installation guide to learn the installation process. In here, I’d like to introduce a installation guide for a 1996-2003 BMW 5 Series E39 bluetooth dvd navigation system from Seicane to you. Wish you can get some help from that.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
1996-2003 BMW 5 Series E39 bluetooth dvd navigation system installation guide
1. Use a plastic trim tool to remove trim strip.
2. Remove screws marked by red arrows.
3. Take out original DVD player of the car.
4. Pull out original power plug of the car.
5. Connect the power cables as the picture shows.
6. Remove screws in the spare tire in the trunk.
7. Take out the spare tire.
8. Remove four screws marked with red arrows.
9. Remove screws in triangle crutch.
10. Take out triangle crutch.
11. Connect original plug of the car with power plug of DVD GPS.
12. Check all the accessories for the new Seicane head unit.
13. Connect the harnesses to the back of the new Seicane head unit.
14. Connect the Seicane head unit to your original car radio ‘s plugs.
15. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
16. Put the new Seicane head unit into the dash and install the four screws.
17. Install the trim panel into its original place.
All above is the detailed installation guide for a 1996-2003 BMW 5 Series E39 bluetooth dvd navigation system. If you don’t have any experience of installation or any problem with this guide, you can go to the dealer ask for help. Or arrange the professional to install it directly. In addition, you have to find the suitable car stereo for your car at first. Do you have the suitable car stereo? If you don’t have one, this multifunctional 1996-2003 BMW 5 Series E39 bluetooth dvd navigation system from Seicane is one of your best choice. You can click this link to check it:
With the most up-to-date intelligent pure android 5.1.1 operation system, you can count on its latest built-in 3D GPS and voice prompts to enter the correct direction of the destination. A variety of additional entertainment features can also bring you a wonderful and relaxing journey that you never ever had before. Wish you like it and enjoy the good time with it from now!
Will this fit the e39 that doesn’t have a nav/gps system
“Dear,
This is Seicane.com.
Thanks for interested in our product.
Could you please send us the photo of your car’s dashboard to [email protected]?
And could you please tell us the model and year of your car?
Then we can check if our unit fit your car ,hope you could cooperate with us.
Looking forward to hearing from you soon.
Thank you & Best regards!
“