How to install a 2003-2011 Porsche Cayenne car stereo with GPS navigation DVD player

When you find your factory radio can’t be compatible with quite a few up-to-date features which are used in a car stereo, it’s a good idea to replace it with a modern aftermarket car stereo with a number of practical and entertainment capabilities. If you own a 2003-2011 Porsche Cayenne, to install a new 2003-2011 Porsche Cayenne car stereo with comprehensive features will definitely bring you an extraordinary driving experience.

Installing a new 2003-2011 Porsche Cayenne car stereo into your vehicle is actually a quite easy job for some car owners. You can finish it in half an hour if you have some related experience. However, if you don’t know how to do, you can take the following guide as the reference or ask a professional for help.

Precautions before the removal and the installation:

1) Please park your car well and disconnect the negative cable of the battery for your safety.

2) Please prepare a lever and a screwdriver before the removal and the installation.

The step-by-step instruction on how to remove and install a 2003-2011 Porsche Cayenne car stereo is as follows.

1. Pry out the trim piece along the perimeter of the center dashboard with a lever.

   

2. Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation.

   

3. Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily.

   

4. Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray.

   

5. Press the tab (green arrow) on the antenna lead and pull it out of the stereo.

   

6. Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle’s different years.

   

7. Connect the cables of the new Seicane car stereo according to the guidance of the user manual.
8. Connect the connectors and the antenna at the back of the new radio.
9. Put the new Seicane car stereo back into the dash.
10. Install two screws and trim piece.
11. Turn on the new radio and have a comprehensive test.

The above is the detailed instruction of the removal and the installation of a 2003-2011 Porsche Cayenne car stereo. Wish you can get help from it. If you still have any problem, you can turn to your dealer for help.

To upgrade your car radio with success, the most important thing is that you buy a right car stereo which can perfectly fit your car. Here I’d like to share an amazing 2003-2011 Porsche Cayenne car stereo from Seicane for you as a reference.

http://www.seicane.com/car-dvd-player-for-porsche-cayenne-with-gps-radio-tv-bluetooth-srd-8816

This intelligent car stereo specially for 2003-2011 Porsche Cayenne is running on the WINCE 6.0 CORE operation system to provide a stable and smooth performance. One of its stunning highlights is that it can support the optic fiber decoder. If your car comes with optic fiber Bose and the year is 2005-2011, this decoder can be installed into your car to support your original car’s optic fiber Bose system, and the sound is in high quality. The installation of the decoder is very easy and is just plug and play. On the other hand, if your car comes without optic fiber Bose system, then this unit is plug and play and is very easy to install.

With a large 7 inch multi-touch screen, you can easily operate the navigation on the unit to get to your desired destination. You won’t get lost any more with the intelligent route planning and the text-to-speech guidance. To ensure safety, you can simply pair with your compatible mobile phone for hands-free calls. Bluetooth audio streaming is desirable for you to relax on the way. Just take this amazing 2003-2011 Porsche Cayenne car stereo to have a brand new driving experience right now!