How to Install a 2013 2014 2015 Suzuki S-Cross Stereo Audio with Bluetooth CD GPS Navigation

If you’re going to replace your factory radio with a new aftermarket car stereo but worry about the complicated installation, you can feel relieved now as the installation of a car stereo is actually not difficult. With a correct installation guide, you can also try to install the car stereo on your own. Today I would like to introduce an easy-to-understand installation instruction for a car stereo, and if you have the same or similar dashboard, you can read this 2013 2014 2015 Suzuki S-Cross car stereo installation instruction carefully.

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2013 2014 2015 Suzuki S-Cross car stereo installation instruction

1. Pry the indicator light with a plastic knife and disconnect the connector at the back of it.

2. Remove the air vent with a plastic removal tool.

3. Remove two top screws that are holding the radio.

4. Gently take out the original radio.

5. Disconnect the connectors and cables at the back of the radio.

6. Check all the accessories for the new Seicane car stereo.

7. Connect the harnesses to the back of the new Seicane car stereo.

8. Connect the Seicane car stereo to your original stereo’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

 

That’s all about how to remove and install a car stereo for 2013 2014 2015 Suzuki S-Cross. Before you start the work, please make clear every specific step. It’s quite normal if you encounter problems during the process of the installation. In that case, you can seek help from a professional or your dealer. To help you better finish the installation, I’d like to share a 2013 2014 2015 Suzuki S-Cross gps bluetooth car stereo from Seicane with you, please click:

http://www.seicane.com/9-inch-quad-core-android-full-touchscreen-2013-2014-2015-suzuki-s-cross-radio-gps-head-unit-with-bluetooth-wifi-4g-usb-obd2-aux-backup-camera-dvr-steering-wheel-control-s30954

This 2013 2014 2015 Suzuki S-Cross car stereo possesses higher configurations for you to upgrade your factory radio, which include the advanced Android 5.0.1 operation system as well as a powerful R16 1.8GHz A9 Quad-core CPU. Take the practical functions as examples, the 3D built-in GPS navigation system of high accuracy can provide lane assist, 3D street view, landmark display, route planning, voice prompts and turn-by-turn direction for you to find your way to a variety of locations. Besides, you can utilize its built-in Bluetooth to wirelessly pair your enabled mobile phone to make and receive hands-free calls and stream audio to keep safe and enjoyable. Wish you enjoy your trip accompanied by this intelligent car stereo!