How to install BMW 1 Series F20 3 Series F30 GPS navigation system with Radio Bluetooth Ipod

You want to make travel time more enjoyable and assured for you, so you decided on a GPS navigation system.Deciding to install a GPS navigation system can be rewarding in the long run,but a little complex in the beginning.Certainly,a novice also can complete this type of installation project,but some experience in this subject will make the process go more quickly. Either way you will save installation cost.You may also be able to seek installation support through the company you purchased the system from.Take your time and it will pay off on those long travel trips.Do you want to save some money and time on the installation?Please read this article:How to install BMW 1 Series F20 3 Series F30 GPS navigation system with Radio Bluetooth Ipod.And you will make it come true.

 

BMW F20 F30 navigation & audio system installation instruction and things to note.

1.Center Console Picture.

2.Accessories: 1) Head Unit 2) Mini Speaker 3) Ipod cable 4) USB cable 5) GPS antenna and two screws for fix Head Unit 6) User Manual 7) Touch Pen 8) Video cable 9) Power cable 10) Head Unit and display screen connecting cable 11) Display Screen

3.Pry and remove air conditioning vent by pry tool,and unplug the connector.

4.Remove the 4 screws which fixed the original screen and air conditioning panel by screwdriver.

5.Pry and remove the air conditioning,and unplug the connectors.

6.Use the pry tool remove the panel.

7.Remove the two screws which for the original CD.

8.Remove the original display screen and unplug the connector.

9.Unplug the original CD’s connector,connect to our power cable,if there are fiber optic wires,please move to relevant PIN of our connector.

10.Plug the Head Unit and display screen connecting cable and GPS antenna.

11.Put the USB cable to USB slot in storage box,and put the iPod cable to there too.

12.Install the mini speaker and plug the mini speaker connector.

13.Plug all connectors and tighten the screws to fix the CD and head unit.

14.Plug all connectors in screen and fix the screen by screws.

15.Put the air conditioning panel,panel,air conditioning vent back and plug all connectors,tighten the screws.

16. After installation picture.

How to setting up the sounds.

Set up our unit’s sounds out from original speakers.

1.Switch to original radio interface.

2.Switch to main interface by press MENU button in iDrive.

3.Choice CD/Multimedia.

4.Enter into Multimedia interface by iDrive.

5.Start the AUX and adjust to proper volume.

6.Press MENU button 3 Seconds to enter into our main interface.

Setting up the Navigation sounds from MINI speaker while listening original radio and CD.

1.Switch to original radio or CD interface.Press the voice shortcuts button to enter into navigation.

2.Now the original radio or CD still have sounds and navigation sounds from MINI speaker.

Below is a video about how to use the GPS navigation system after installing it.

Through the introduction above,you will feel that it is not so complex about How to install BMW 1 Series F20 3 Series F30 GPS navigation system with Radio Bluetooth Ipod.Isn’t it?Maybe you are a novice,but keep patient and read this article carefully.You will learn something more than installation.To know more about BMW 1 Series F20 3 Series F30 GPS navigation system,please visit: http://www.seicane.com/bmw-1-series-f20-gps-navigation-with-radio-bluetooth-ipod-srd-8840   http://www.seicane.com/bmw-3-series-f30-gps-navigation-with-radio-bluetooth-ipod-srd-8840-1   Enjoy the fun of driving is more important than just have it.GPS navigation system is a very important member in the big car family.If you have one,enjoying it to the fullest.If not,taking one as soon as possible.At that time,car is a lovely partner more than a vehicles.