If you own a car, would you like to remove the factory radio and install the new car radio by yourself ? If yes, you can refer to a correct car radio installation instruction. Since most car radios are plug and play, the car radio removal and installation process is not complicated. The following is a 2012 2013 2014 2015-2017 TOYOTA CAMRY EUR VERSION car radio installation instruction from Seicane. If you have the same or similar dashboard, you can refer to this instruction carefully.
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2012 2013 2014 2015-2017 TOYOTA CAMRY EUR VERSION car radio installation instruction
1. Remove the lower dashboard trim panels and the upper air conditioning vents.
2. Gently pry the upper dashboard housing from the radio’s trim bazel using either an automotive trim tool or your hands.
3. After the upper dashboard housing has been disconnected, remove the two upper &two lower radio mounting screws from the dashboard.
4. Once the four radio mounting screws have been removed, gently lift the radio from the dashboard in order to gain access to the factory wiring harnesses on the backside.
5. Disconnect the connectors at the back of the radio.
6. Check all the accessories for the new Seicane car radio.
7. Connect the harnesses to the back of the new Seicane car radio.
8. Connect the Seicane car radio to your original radio’s plugs.
9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car radio into the dash.
11. Put everything into their original place. All the installation is done.
Wish you can get some help from the installation guide. If you meet any problems you don’t know how to solve by yourself, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. Or if you still think it hard for you to install the new car radio by yourself, you’d better go to a car radio upgrade center and ask a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to select an ideal car radio. If you have no ideas, here I would like to share an amazing 2012 2013 2014 2015-2017 TOYOTA CAMRY EUR VERSION car radio from Seicane with you. For more details, please click:
This car radio is running on the stable and advanced Android 6.0 operation system and a powerful quad-core CPU processor to enhance its capabilities and improve performance. Therefore, with this car radio installed in your car, you can embrace a much smoother, faster and easier operation experience.
Even you don’t have good sense of directions, you can gain a lot of help from the 3D GPS navigation function. Thanks to the text-to-speech guidance provided by the high-end 3D GPS navigation system, you can easily know where you are and accurately find the right way to reach your desired destinations. Additionally, this unit’s dual zone function enables you to listen to your favorite music while navigating.
Through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you, which can add a lot of convenience and enjoyment too your driving.
If you like this unit, just add it to your shopping cart. Good luck!