If you want to upgrade your factory radio, you’d better figure out what features you need most, which can help you easily find an ideal car stereo in a sea of goods. If you don’t know how to install a new stereo, you can either go to a car stereo upgrade center or ask a professional for help. The following is a step-by-step 2002 2003 2004 Range Rover car radio installation instruction from Seicane. If you have the same dashboard as the picture below, you can refer to it.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2002 2003 2004 Range Rover car radio installation instruction
1·First pry off the top panel with flat screwdriver and set it aside.
2·Next remove two screws under the top panel with a Phillips screwdriver as the picture shows.
3·Remove all screw holding the panel above the radio.
4·Pull out the panel as the picture shows.
5·Then remove screws holding the radio in dashboard with a Phillips screwdriver as the picture shows.
6·Pull out the whole console with radio slowly.
7·Disconnect the original harness.
8·Pry off the control panel.
9·Remove the screws and remove the radio frame.
10·Check all the accessories for the new Seicane car radio.
11. Connect the harnesses to the back of the new Seicane car radio.
12. Connect the Seicane car radio to your original car radio ‘s plugs.
13.Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly..
14.If everything is OK, firm removed screws that are put aside, then make trim panel back on your new Seicane radio.
Can you understand all the installation steps for a 2002 2003 2004 Range Rover car radio? If not, it’s suggested you consult your dealer. Or you can also directly have a professional install it. If you haven’t found an ideal head unit for your car, you can refer to this amazing 2002 2003 2004 Range Rover car radio from Seicane. It comes with the latest features and capabilities for you to upgrade your factory radio. For more details, you can click:
This modern 2002 2003 2004 Range Rover car radio comes with many improved and upgraded features including Quad-core CPU, GPS navigation, DVD player and Bluetooth, a lot of convenience is given to you and you can have much enjoyment in the car while you are driving. Hands-free calls are also supported by Bluetooth connection with your bluetooth-enabled mobile phones for a safer journey. Have a good time with this top 2002 2003 2004 Range Rover car radio and good luck to you!