There is no denying that an ideal car radio can play a significant role in your driving as it controls the entertainment system of a car. However, you may find that your factory radio may not be compatible enough to support a lot of features that will meet most of your needs in car. In that case, it is wise of you to upgrade your factory radio with an intelligent car radio which comes with a lot of comprehensive features. The following is a 2013 2014 Toyota Vios car radio installation guide from Seicane which can be taken as your reference.
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details:http://www.seicane.com/car-dvd-dismantling-device-srd-400
2013 2014 Toyota Vios car radio installation guide
1. The original car radio.
2. Remove the panel with your hands,please use a plastic removal tool if necessary.
3. Disconnect the connector at the back of the air vent.
4. Use a screwdriver to remove four screws that are holding the original car radio.
5. Gently take out the original car radio from thedashboard.
6. Unplug the connectors and cables at the back of the original car radio.
7. Check all the accessories for the new Seicane car radio.
8. Connect the harnesses to the back of the new Seicane car radio.
9. Connect the Seicane car radio to your original car radio’s plugs.
10. Put the new Seicane car radio into the dash.
11. Turn on the new Seicane car radio and have a comprehensive check if it works well.
12. Install 4 screws back to their original position.
13. Install the trim panel back to its original place.
Above steps are all about how to remove the factory radio and install the new car radio in a 2013 2014 Toyota Vios. If you cannot fully understand these steps, you can consult your dealer or ask for a professional for help. Or you can directly go to a car radio upgrade center to have the new car radio installed by a professional technician. Besides, to help you select an ideal car radio, here I would like to recommend a marvelous 2013 2014 Toyota Vios car radio from Seicane to you. Here comes the related link, please click:
This car radio is running on the stable Android 6.0 operation system and a quad-core CPU processor, so with it installed in your car, you can enjoy its stable and smooth performance.
After you install this car radio in your car, you can get access to a wide range of comprehensive features, including GPS navigation, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, AUX, steering wheel control, USB & SD card connections, etc.
Under the guidance of turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you can find the right way to reach any locations you would like to go to. And this unit’s dual zone function enables you to listen to your favorite music while navigating.
Besides, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, Bluetooth hands-free calls and Bluetooth streaming music are both available for you to gain great convenience and enjoyment.
Wish you like this unit and good luck to you!