Home › Archive for Installation › Page 5

Installation

car dvd player Installation

A Step-by-step Installation Guide for 2002-2008 Mercedes Benz W211 Car Stereo System with Bluetooth GPS Navigation

Posted on by — 10 Comments ↓ 10,256 views

Here shows you an intelligent 2002-2008 Mercedes Benz W211 car stereo system from Seicane. The product comes with the latest operating system and 8-core CPU for you to upgrade your factory radio.

 

If you are going to replace your factory radio with a new aftermarket car stereo system, it’ll be great for you to know some installation instruction for it. The installation is not quite difficult, if you have some related installation experience and a correct guide, you can easily finish the installation on your own. Please look at the picture above, if you also have the same dashboard, you can refer to the following 2002-2008 Mercedes Benz W211 bluetooth car stereo instruction to help with the installation.

 

Precautions :

  1. Please disconnect the power before the installation.
  2. Please prepare unlock toolsbefore the removal and the installation.
  3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. So each related part of the unit can be fixed securely.

 

2002-2008 Mercedes Benz W211 car stereo installation guide

The original dashboard.

 

Installation step 1. Use a lever to release the decoration panel and remove the cigarette lighter.

2004-2011 Mercedes-Benz CLS-W219 car stereo installation step 2

 

Installation step 2. Remove two screws under the 6-disc CD changer and take out the CD changer.

2004-2011 Mercedes-Benz CLS-W219 car stereo installation step 3

 

Installation step 3. Remove the two screws marked with red arrows and pull out the CD player.

2004-2011 Mercedes-Benz CLS-W219 car stereo installation step 4

 

Installation step 4. Connect the cables in the package.

 

Installation step 5. Remove the baffle-plate under the assistant driver seat, connect the CAN-H, CAN-L cable (green) with the CAN-BUS socket marked in the picture.

2004-2011 Mercedes-Benz CLS-W219 car stereo installation step 6

 

Installation step 6. Pry the decoration panel beside the driver’s seat, change fuse from 5A TO 10A

2004-2011 Mercedes-Benz CLS-W219 car stereo installation step 7

 

Installation step 7. Remove the screws for fastening the car pc in the left of the trunk.

2004-2011 Mercedes Benz CLS Class W219 car stereo installation step 8

 

Installation step 8. Find the amplifier in the left of the trunk and remove the four screws marked with red arrows.

2004-2011 Mercedes-Benz CLS-W219 car stereo installation step 9

 

Installation step 9. Remove the amplifier in the car.

2004-2011 Mercedes-Benz CLS-W219 car stereo installation step 10

 

Installation step 10. Connect the speaker cable with the speaker.

 

Installation step 11. Turn on the new Seicane bluetooth car stereo to have a careful check if everything works well.

 

Wish the above installation guide can be helpful for you. If you have any question, you can refer to your dealer or a professional for help. Please make clear every step before you start to install. If you find it too hard to understand all the steps, you’d better go to a car stereo upgrade center to have it installed.

 

In addition, to make sure you have a successful upgrade, you need to confirm that your new stereo is suitable for your car, so that it can work well with your car.

 

With this Android 10.0 Mercedes Benz W211 bluetooth car stereo which is 4G+64G and support touch screen spilt screen display in your car, you are enabled to play DVD, CD, VCD, FM/AM radio, HD 1080P Video, music, etc. The Bluetooth technology also makes you possible to dial and receive calls with your hands on the steering wheel control and your eyes on the road ahead to keep safe. The lane assist, voice prompts and accurate direction provided by the GPS navigation can lead you to your destination within the least time.

 

To improve your in-car environment and your driving experience, this Seicane Mercedes Benz W211 car stereo is just your ideal choice. Just take it and go!

How to install a 2007-2018 Toyota FJ CRUISER Bluetooth Radio GPS System

Posted on by — 3 Comments ↓ 11,211 views

With the improvement of people’s life, more and more families prefer to buy car for outside activities. However, the factory radio seems can not satisfy their needs, most of them choose to install a Bluetooth Radio GPS System which make it possible to listen to radio or music while navigation. This kind of function may entertain the dull journey and comfort the naught children. There is no doubt that Bluetooth Radio GPS System can make you trip more convenient and easier. Since most people have no idea of how to install the devices, here we will share you a simple way of how to install a 2007-2018 Toyota FJ CRUISER Bluetooth Radio GPS System. You can follow the steps as the video if your car is similar to this one.

 

 

Preparation for Installation:

1.Make sure the power has been cut off before installation to avoid any danger.
2. Check your professional car radio dismantling tools, screwdriver, 3M electronic tape, 3M double side tape, sleeve, cotton cloth.
3. Keep all the separate parts from the car.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

 

2007-2018 Toyota FJ CRUISER Bluetooth Radio GPS System Disassembly and Installation Steps:

 

1.  Original dashboard

2. Remove the frame of both left and right side

3. Remove the two screwson each side

4. Take the main frame out and pull out the plug on it

5. Remove the screws inside and take the original radio out

6. Pull out the plug on the original radio

7. Install the new screen on the main frame

8. Plug well the power harness/USB cable/GPS antenna

9. Fasten the two screws on the main frame

10. Fix the two frames on each side

11. Full Test

 

If you still don’t know how to operate after watching the video, you can find professional people around you to help you install the device. And if you don’t know which Bluetooth Radio GPS System is suitable for you, I would like to share you a  2007-2018 Toyota FJ CRUISER Bluetooth Radio GPS System for you. You can click the following link to find more details:

https://www.seicane.com/full-touchscreen-2007-2018-toyota-fj-cruiserradio-gps-navigation-system-bluetooth-3g-wifi-rearview-camera-mirror-link-obd2-dvr-steering-wheel-control-h6031k

With intelligent pure Android 8.1 operation system and 9 inch full touchscreen, it will be your perfect road companion. The system supports surfing internet via 3G or WiFi.You can download any applications in the android market for access to games.The car stereo is equipped with worldwide real-time navigation function of high accuracy. These function will provide you the best driving experience.

If you are interested in this devices, please don’t hesitate to contact us!

 

How to Install or Replace 2011 2012 BMW 5 Series F10/F11 CIC GPS Navigation Radio

Posted on by — No Comments ↓ 3,571 views 


car gps navigation radio for 2011 2012 BMW 5 Series 
Car GPS Navigation radio for 2011 2012 BMW 5 Series


Nowadays, car are playing very important roles in our daily life and it seems that the factory radio can not meet most people’s needs.The GPS Navigation Radio can not only guide your way ,but also entertain your dull trip. The dual zone function makes it possible to listen to radio/USB/SD music while navigating. In demand of good driving experiences, people would like to choose the GPS Navigation Radio to replace the original radio.  However, most people don’t know how to install a GRS Navigation Radio by themselves. Here, our Seicane will lead your way to know how to install or replace 2011 2012 BMW 5 Series F10/F11 CIC GPS Navigation Radio.


 


Precaution for Installation:


1. Cut off the power before installation to avoid any danger.


2. Please prepare professional car radio dismantling tools, screwdriver, 3M electronic tape, 3M double side tape, sleeve, cotton cloth.


3. Please keep all the separate parts from the car.


4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400


 


Before installation, please check your car firstly. If it is similar to this type, then you can refer to this video to install or replace 2011 2012 BMW 5 Series F10/F11 CIC GPS Navigation Radio.




 


If you still have no idea of how to install or replace this kind of GPS Navigation Radio after watching the video, you can consult us or ask professional people around for help. And if you don’t know how to choose a GPS Navigation Radio, I would like to share you a remarkable 2011 2012 BMW 5 Series F10/F11 CIC GPS Navigation Radio for you. For more detailed information, you can go to the following website:


https://www.seicane.com/android-2011-2012-bmw-5-series-f10-f11-cic-hd-touchscreen-car-stereo-radio-head-unit-gps-navigation-bluetooth-phone-mp3-steering-wheel-control-wifi-backup-camera-s028208


With 8.8 /10.25 inch IPS screen, this unit looks very exquisite. Its screen feels very smooth and flawless. Just enjoy a visual feast on this 1280*480 resolution unit. It can support the original car’s all functions, such as radio or Bluetooth function, or the users can utilize this unit’s built-in radio or music function. Besides, its customized wallpaper allows you to set your own photo as background of the main menu.


If you have any question, please feel free to let us know!

				

					


		

				


			
					

		
		
				


	
How to upgrade a 2007 2008 Chrysler Aspen(W NAV) head unit with TV Tuner Bluetooth IPod Iphone AUX USB SD Dual Zone

			

			Posted on   by  				
					—
					2 Comments ↓				
			7,943 views					

	




		
		

							

											
							2007 2008 Chrysler Aspen(W NAV) head unit after installation						
					
					
Travelling in your own car with your families is quite exciting, isn’t it? To have a more pleasant experience, you can easily add more fun by upgrading your factory radio with an aftermarket multifunctional…..car stereo which can be compatible with a host of entertainment in a car. And you can read carefully this step-by-step 2007 2008 Chrysler Aspen(W NAV) head unit installation instruction from Seicane to guide you to install it in your car.


2007 2008 Chrysler Aspen(W NAV) head unit after installation
2007 2008 Chrysler Aspen(W NAV) head unit after installation


 


 


Tips about the installation:


 


1.Please disconnect the power before the installation.


2.Please prepare a lever and a screwdriver before the removal and the installation.


3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.


4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400


 


 


2007 2008 Chrysler Aspen(W NAV) head unit installation guide 


 


1.Loosen the trim panel with a lever.


1.Loosen the trim panel with a lever
1.Loosen the trim panel with a lever


 


2.Take the panel off the dash and disconnect the wires from the car.


2-1.Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car.


2-2.Take the panel off the dash and disconnect the wires from the car.
2-2.Take the panel off the dash and disconnect the wires from the car.


 


3.Remove the four screws which are holding the unit with a screwdriver.


3.Remove the four screws which are holding the unit with a screwdriver.
3.Remove the four screws which are holding the unit with a screwdriver.


 


4.Take out the unit and disconnect the wire harness at the back of the unit.


4-1.Take out the unit and disconnect the wire harness at the back of the unit.
4-1.Take out the unit and disconnect the wire harness at the back of the unit.


4-2.Take out the unit and disconnect the wire harness at the back of the unit.
4-2.Take out the unit and disconnect the wire harness at the back of the unit.


 


5.Check all the accessories for the new Seicane unit.


5.Check all the accessories for the new Seicane car radio.
5.Check all the accessories for the new Seicane car radio.


 


6.Connect the Seicane unit to your original car radio ‘s plugs.


6-1. Connect the Seicane car stereo to your original car radio 's plugs.
6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.


6-2. Connect the Seicane car stereo to your original car radio 's plugs.
6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.


 


7.Put the new Seicane unit into the dash.


7.Put the new Seicane stereo into the dash.
7.Put the new Seicane stereo into the dash.


 


 


8.Turn on the new unit and have a test if the new Seicane unit is working without problem..


9.Put trim panel back on your new Seicane unit after the normal test.


 


Wish you can get some help from the above installation guide for a 2007 2008 Chrysler Aspen(W NAV) head unit. If you find your dashboard is different from that shown in the guide pictures, please don’t worry, you can still refer to it for your installation. If there is any problem, you can turn to your dealer for help.


 


Besides, it’s necessary for you to check the compatibility between the your new unit and your car. But if you don’t have a suitable unit for your car, you can refer to this intelligent 2007 2008 Chrysler Aspen(W NAV) head unit from Seicane, please click for more details:


 


http://www.seicane.com/2-din-2002-2007-2008-chrysler-aspen-concorde-pacifica-dvd-gps-sat-nav-am-fm-radio-tv-tuner-bluetooth-ipod-iphone-aux-steering-wheel-control-usb-sd-dual-zone-t6015




 


This up-to-date aftermarket Chrysler Aspen(W NAV) head unit is an ideal replacement for you to upgrade your factory radio to better capabilities. With the built-in wifi, you can freely get access to the online data in your car as long as you can connect with a wifi hotspot. If you want to keep safer and happier on your journey, you can simply link with your enabled cell phone for hands-free calling and music streaming. Just navigate to your destination on time with the help of the most accurate spoken guidance provided by this great unit! Good luck to you!

				

					


		

				


			
					

		
		
				


	
A step-by-step installation guide for a 2002 2003 2004 Chrysler 300M radio with USB SD AUX Rearview Camera IPOD MP3 Dual Zone

			

			Posted on   by  				
					—
					No Comments ↓				
			5,311 views					

	




		
		

							

											
							2002 2003 2004 Chrysler 300M radio after installation						
					
					
Nowadays, to upgrade something you want in your car won’t cost you a bank. Therefore, more and more car owners would like to improve their driving experience by replacing their factory radio which is actually the main entertainment center in a car. To help you install your new head unit, I’d like to share a detailed 2002 2003 2004 Chrysler 300M radio installation guide with you. If you find your dashboard is the same as the picture below, then you can take the following instruction as a reference.


2002 2003 2004 Chrysler 300M radio after installation
2002 2003 2004 Chrysler 300M radio after installation


 


 


Tips about the installation:


 


1.Please disconnect the power before the installation.


2.Please prepare a lever and a screwdriver before the removal and the installation.


3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.


4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400


 


 


2002 2003 2004 Chrysler 300M radio installation guide


 


1.Remove the trim piece above cup holder with a lever.


1.Remove the trim piece above cup holder with a lever.
1.Remove the trim piece above cup holder with a lever.


 


2.Remove 2 screws behind the trim piece.


2.Remove 2 screws behind the trim piece.
2.Remove 2 screws behind the trim piece.


 


3.Gently pry around the side of trim panel with the lever and then remove the trim panel.


3.Gently pry around the side of trim panel with the lever and then remove the trim panel.
3.Gently pry around the side of trim panel with the lever and then remove the trim panel.


 


4.Remove 4 screws which holds the factory radio in place.


4.Remove 4 screws which holds the factory radio in place.
4.Remove 4 screws which holds the factory radio in place.


 


5.Take out the factory radio.


5.Take out the factory radio.
5.Take out the factory radio.


 


6.Disconnect the smaller harness on the behind of the factory radio.


6.Disconnect the smaller harness on the behind of the factory radio.
6-1.Disconnect the smaller harness on the behind of the factory radio.


6-2. Check all the accessories for the new Seicane car radio.
6-2. Check all the accessories for the new Seicane car radio.


 


7.Connect the Seicane car radio to your original car radio ‘s plugs.


7. Connect the Seicane car radio to your original car radio 's plugs.
7. Connect the Seicane car radio to your original car radio ‘s plugs.


 


8.Connect the smaller harness at the back of the new radio.


9.Put the new Seicane radio back into the dash.


10.Install four screws and trim panel.


11.Install 2 screws behind the trim piece and the trim piece.


12.Turn on the new radio and have a comprehensive test.


13.Tidy up everything in your car, and all the installation is done.


 


 


Now can you install your new 2002 2003 2004 Chrysler 300M radio under the guidance of this instruction? If not, you can go to a car radio upgrade center to install it or ask a professional for help. If there is any question, you can also consult your dealer.


 


A suitable car radio plays an important role on the upgrade. If you don’t find a fitting radio for your car, I’d like to recommend a wonderful 2002 2003 2004 Chrysler 300M radio from Seicane to you, please click for more details:


 


http://www.seicane.com/2001-2002-2003-2004-2007-chrysler-300m-pt-cruiser-sebring-concorde-grand-voyager-town-country-autoradio-navigation-stereo-cd-dvd-player-bluetooth-music-tv-usb-sd-aux-rearview-camera-ipod-mp3-dual-zone-t6096




 


This Chrysler 300M radio is equipped with the advanced WinCE 6.0 operation system and a powerful Cortex A9 MStar 785 1GHz CPU for you to upgrade your factory radio. This modern radio comes with a number of useful features and entertainment options for you to upgrade your factory radio, which include 3D gps navigation system, bluetooth technology, DVD and CD player, FM/AM radio, wifi, TV, USB port and an SD card slot, etc. The functions of your steering wheel control will still be retained after installation. Just go with it and have a wonderful time!


 


 

				

					


		

				


			
					

		
		
				


	
The step-by-step installation instruction for a 2004 2005 Dodge 2500 Pickup Truck radio with GPS AUX MP3 TV Tuner IPOD HD Touch Screen

			

			Posted on   by  				
					—
					2 Comments ↓				
			4,724 views					

	




		
		

							

											
							2004 2005 Dodge 2500 Pickup Truck radio after installation						
					
					
Are you desired to pleasantly drive to a lot of locations? If you say yes, then an amazing car radio can easily make that happen. You just need to remove your factory radio, and install a new car radio in your car, and a brand new experience is just in your rearch. Here comes a detailed 2004 2005 Dodge 2500 Pickup Truck radio installation guide from Seicane for you to help with the installation.


2004 2005 Dodge 2500 Pickup Truck radio after installation
2004 2005 Dodge 2500 Pickup Truck radio after installation


 


Some tips before the installation:


    

  1. Please disconnect the power before the installation.
    2. 

  2. Please prepare a lever and a screwdriver before the removal and the installation.
    3. 

  3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
    4. 



 


2004 2005 Dodge 2500 Pickup Truck radio installation guide


1.Remove the trim piece above cup holder with a lever.


1.Remove the trim piece above cup holder with a lever.
1.Remove the trim piece above cup holder with a lever.


 


2.Remove 2 screws behind the trim piece.


2.Remove 2 screws behind the trim piece.
2.Remove 2 screws behind the trim piece.


 


3.Gently pry around the side of trim panel with the lever and then remove the trim panel.


3.Gently pry around the side of trim panel with the lever and then remove the trim panel.
3.Gently pry around the side of trim panel with the lever and then remove the trim panel.


 


4.Remove 4 screws which holds the factory radio in place.


4.Remove 4 screws which holds the factory radio in place.
4.Remove 4 screws which holds the factory radio in place.


 


5.Take out the factory radio.


5.Take out the factory radio.
5.Take out the factory radio.


 


6.Disconnect the smaller harness on the behind of the factory radio.


6.Disconnect the smaller harness on the behind of the factory radio.
6.Disconnect the smaller harness on the behind of the factory radio.


 


7.Connect the cables of the new Seicane radio according to the guidance of the user manual.


7.Connect the cables of the new Seicane car stereo according to the guidance of the user manual.
7.Connect the cables of the new Seicane car stereo according to the guidance of the user manual.


 


8.Connect the smaller harness at the back of the new radio.


9.Put the new Seicane radio back into the dash.


10.Install four screws and trim panel.


11.Install 2 screws behind the trim piece and the trim piece.


12.Turn on the new radio and have a comprehensive test.


 


Can you understand all the steps and install your new radio under the help of this detailed instruction for a 2004 2005 Dodge 2500 Pickup Truck radio? If not, then you can go to a car radio upgrade center or ask a professional to help you install it. If there is any question during the whole process, please don’t hesitate to ask your dealer for help.


 


This Dodge 2500 Pickup Truck radio comes with a digital 800*400 multi-touch screen to simplify the operation and provide an intuitive interface for you to upgrade your factory radio. You can play DVDs, CDs, VCDs, bluetooth music, FM/AM radio to relax both you and your passengers. Besides, other flexible entertainment options can be available via the USB and SD card connection.


 


You won’t get lost in any unfamiliar location when you take this excellent GPS navigation system with you. To make your driving safer, you just need to simply pair with your compatible mobile phone to dial and receive phone calls with your hands on the steering wheel.


 


Just take this intelligent Dodge 2500 Pickup Truck radio on all your journey, the maximum enjoyment will always be with you.

				

					


		

				


			
					

		
		
				


	
How to easily upgrade a 2002-2008 Dodge RAM Pickup radio with DVD Player Touch Screen DVR TV USB SD 1080P Video

			

			Posted on   by  				
					—
					1 Comment ↓				
			7,715 views					

	




		
		

							

					
					
One of the coolest ways to relax in a car is to enjoy your most favorite music while you are navigating to your desired destination under the guidance of the most accurate direction at the same time. If your factory radio can’ t meet your needs any more, it’s wise of you to replace it with a new aftermarket car stereo which can support a wide range of features. Here I’d like to show you a step-by-step 2002-2008 Dodge RAM Pickup radio installation guide from Seicane with you. Wish it can be helpful for you.


2002-2008 Dodge RAM Pickup radio after installation
2002-2008 Dodge RAM Pickup radio after installation


Precautions for this installation:


1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.


2.Please make sure that all fastened wires are isolated with electrical tape.


3.Please make sure the ignition is off to avoid short circuit.


 


2002-2008 Dodge RAM Pickup radio installation guide   


1.Loosen the trim panel with a lever.


1.Loosen the trim panel with a lever
1.Loosen the trim panel with a lever


2.Take the panel off the dash and disconnect the wires from the car.


2-1.Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car.


2-2.Take the panel off the dash and disconnect the wires from the car.
2-2.Take the panel off the dash and disconnect the wires from the car.


3.Remove the four screws which are holding the unit with a screwdriver.


3.Remove the four screws which are holding the unit with a screwdriver.
3.Remove the four screws which are holding the unit with a screwdriver.


4.Take out the unit and disconnect the wire harness at the back of the unit.


4-1.Take out the unit and disconnect the wire harness at the back of the unit.
4-1.Take out the unit and disconnect the wire harness at the back of the unit.


4-2.Take out the unit and disconnect the wire harness at the back of the unit.
4-2.Take out the unit and disconnect the wire harness at the back of the unit.


5.Connect the new wiring harness adaptor to the car, then, to the unit.


5-1.Connect the new wiring harness adaptor to the car, then, to the unit.
5-1.Connect the new wiring harness adaptor to the car, then, to the unit.


5-2.Connect the new wiring harness adaptor to the car, then, to the unit.
5-2.Connect the new wiring harness adaptor to the car, then, to the unit.


6.Connect the wire as the user manual shows and put the new unit into the dash.


6.Connect the wire as the user manual shows and put the new unit into the dash.
6.Connect the wire as the user manual shows and put the new unit into the dash.


7.Turn on the new unit and have a test if the new Seicane radio is working without problem..


8.Put trim panel back on your new Seicane radio after the normal test.


Wish you can get some help from the above installation guide for the 2002-2008 Dodge RAM Pickup radio. If there is any question during the process of the installation, you can consult your dealer or a professional for help. If you don’t have enough experience to install a new radio, you’d better have it installed by professionals.


Besides, only a suitable radio can be well installed in your car. If you don’t have one, I’ d like to recommend this excellent 2002-2008 Dodge RAM Pickup radio from Seicane to you, please click:


This modern Dodge RAM Pickup radio features a wide range of practical functions and multimedia options for you to replace your factory radio for higher performance as well as a different driving experience. The 3D GPS function, bluetooth hands-free calls, bluetooth music, DVD player, FM/AM radio, Ipod, wifi, USB and SD connection, etc. are all provided for you to get the convenience in your car. Besides, you can also connect with a backup camera to make your parking easier.

				

					


		

				


			
					

		
		
				


	
Simply install a new 2002-2007 Chrysler 300-M 300C 300 Limited/Touring radio with 8 steps

			

			Posted on   by  				
					—
					No Comments ↓				
			6,525 views					

	




		
		

							

											
							2002-2007 Chrysler 300-M 300C 300 Limited Touring radio after installation						
					
					
At present, cars are becoming more and more easily available for people. Therefore, car owners would like to have a better driving experience on the way. One of the most frequently used ways is to upgrade the factory radio. If you find your factory radio can’ t meet all your needs, it’s wise of you to replace it. And I’ d like to introduce a detailed 2002-2007 Chrysler 300-M 300C 300 Limited/Touring radio installation instruction from Seicane to help with your installation.


2002-2007 Chrysler 300-M 300C 300 Limited Touring radio after installation
2002-2007 Chrysler 300-M 300C 300 Limited Touring radio after installation


 


 


Before and during installation, you should notice:


1.Before connecting, please make sure the ignition is off to avoid short circuit.


2.Ensure connect the yellow and red power cable at last.


3.Ensure that all loose wires are isolated with electrical tape


4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).


5.Ensure that all ground is connected to the same place.


6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.


 


 


2002-2007 Chrysler 300-M 300C 300 Limited/Touring radio installation guide 


 


1.Loosen the trim panel with a lever.


1.Loosen the trim panel with a lever
1.Loosen the trim panel with a lever


 


2.Take the panel off the dash and disconnect the wires from the car.


2-1.Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car.


2-2.Take the panel off the dash and disconnect the wires from the car.
2-2.Take the panel off the dash and disconnect the wires from the car.


 


3.Remove the four screws which are holding the unit with a screwdriver.


3.Remove the four screws which are holding the unit with a screwdriver.
3.Remove the four screws which are holding the unit with a screwdriver.


 


4.Take out the unit and disconnect the wire harness at the back of the unit.


4-1.Take out the unit and disconnect the wire harness at the back of the unit.
4-1.Take out the unit and disconnect the wire harness at the back of the unit.


4-2.Take out the unit and disconnect the wire harness at the back of the unit.
4-2.Take out the unit and disconnect the wire harness at the back of the unit.


 


5.Connect the new wiring harness adaptor to the car, then, to the unit.


5-1.Connect the new wiring harness adaptor to the car, then, to the unit.
5-1.Connect the new wiring harness adaptor to the car, then, to the unit.


5-2.Connect the new wiring harness adaptor to the car, then, to the unit.
5-2.Connect the new wiring harness adaptor to the car, then, to the unit.


 


 


6.Connect the wire as the user manual shows and put the new unit into the dash.


6.Connect the wire as the user manual shows and put the new unit into the dash.
6.Connect the wire as the user manual shows and put the new unit into the dash.


 


7.Turn on the new unit and have a test if the new Seicane radio is working without problem..


8.Put trim panel back on your new Seicane radio after the normal test.


 


That’s all the steps about how to remove an old radio and install a new Chrysler 300-M 300C 300 Limited/Touring radio in your car. If you have any questions, please feel free to contact your dealer or ask a professional for help. On the other hand, to ensure you have a successful radio upgrade, it’s essential for you to make sure your new car radio can be compatible with your car, if you have no idea about this, you can refer to this intelligent Chrysler 300-M 300C 300 Limited/Touring radio from Seicane, please click for more details:


 


http://www.seicane.com/seicane-s09206-android-gps-radio-car-stereo-for-2002-2007-chrysler-300-m-300c-300-limited-touring-with-dvd-player-gps-navigation-system-mirror-link-touch-screen-rearview-camera-tv-video-wifi-canbus-obd2-bluetooth-usb-sd-steering-wheel-control




 


Enjoy your favorite music videos and movies with this amazing Chrysler 300-M 300C 300 Limited/Touring radio in you car on all trips. There are a number of practical and amusing features for you to get the convenience and enjoyment in your car, which includes the 3D GPS navigation system, bluetooth hands-free calls, bluetooth streaming audio, DVD player, FM/AM radio, wifi, USB, SD, etc. Wish you like it and have a wonderful time all the way!

				

					


		

				


			
					

		
		
				


	
A detailed Installation guide for 2010 2011 VW Volkswagen Passat(MK7) car Radio with TV Tuner DVR USB SD 1080P Video DVD Player Bluetooth 3G WIFI

			

			Posted on   by  				
					—
					No Comments ↓				
			6,784 views					

	




		
		

							

					
					
Nowadays for car owners,not only the comfortable and safe driving experience is quite important but also to have a thing with many features to offer lots of fun and convenience such as a new car stereo. The following is the step-by-step installation and removal guide of 2010 2011 VW Volkswagen Passat(MK7) car Radio from Seicane.


2010 2011 VW Volkswagen Passat(MK7) car stereo after installation


2010 2011 VW Volkswagen Passat(MK7) car stereo after installation


Please note:


1.Before any work, park your car well and unplug the negative power cable to avoid any danger.


2.Please make sure that all fastened wires are isolated with electrical tape.


3.Please make sure the ignition is off to avoid short circuit.


 


    

  • 2010 2011 VW Volkswagen Passat(MK7) car Radioinstallation guide
    • 



Step1: Remove the trim panel.


Please pry around the trim panel with a lever and loosen the trim panel with one hand while prying.When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.


     


 


Step2: Remove the four screws on the radio.


Please unscrew the four screws at four corners.Then keep them well for the installation of a new head unit.


Step 2. Remove the four screws on the radio.


Step3: Take the factory radio out of the dash.


After the four screws are unscrewed, you can easily pull the factory radio out of the dash.


Step 3. Take the factory radio out of the dash.


Step4: Disconnect the wiring harness.


Please disconnect the wiring harness at the back of the factory radio before you put it aside.


Step 4. Disconnect the wiring harness.


 


Step 5: Connect the new Seicane stereo to the original wiring harness as the user manual or the wiring diagram shows.




 


Step 6: Turn on the new Seicane stereo to have a check if everything works well. Or please check whether all the cables are connected correctly.




Step 7: Put the new Seicane stereo into the dash and install the four screws.


 


Step 8: Install the trim panel into its original place.


 


    

  • According to the guide reference above , you may have a general idea about how to install a new aftermarket 2010 2011 VW Volkswagen Passat(MK7) car DVD player. You can ask the dealer or a professional for help if any questions. Meanwhile, it’s vital for you to confirm that your new Car GPS Navigation can fit your car. Also you can check the link below for more details about this modern 2010 2011 VW Volkswagen Passat(MK7) car Radio from Seicane.
    • 



https://www.seicane.com/android-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-skoda-seat-with-3g-wifi-mirror-link-obd2-bluetooth


This high-end VW Volkswagen Passat(MK7) car Radio comes with come with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP ,etc. You can be on safe and delightful trips if simply sync with the smart phone,so that you are able to make and receive hands-free calls and stream music. Go ahead to take it right now and have a wonderful time from now on!

				

					


		

				


			
					

		
		
				


	
How to install a new 2012 2013 2014 Subaru Forester head unit with 3G WiFi GPS Navigation system USB SD Video 3G WiFi

			

			Posted on   by  				
					—
					No Comments ↓				
			8,085 views					

	




		
		

							

					
					
For car owners, to have a multifunctional car radio can bring lots of entertainment on all trips. And also enhance the quality of living life. However,you might have a confusion that how can i replace my car stereo with a new expected one. Here below i would like to share you a specific installation and removal guide for 2013 2014 Subaru XR Forester Impreza car stereo from Seicane.




Precautions:


    

  1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
    2. 

  2. A lever and a screwdriver need to be prepared before the installation.
    3. 



2013 2014 Subaru XR Forester Impreza car radio installation guide


 


    

  1. Take out of the glove.
    2. 

  2. Unplug the plug which connect the trim panel to the dash.
    

    
 
    3. 

  3. Pry the a/v vent panel with a lever.
    

    
 
    4. 

  4. Off the vent panel out of the dash.
    

    
 
    5. 

  5. Unplug all the connectors at the back of the vent panel.
    

    
 
    6. 

  6. Remove four screws holding the factory radio.
    

    
 
    7. 

  7. Gently take the factory radio out of the dashboard.
    

    
 
    8. 

  8. Unplug the connectors at the back.
    

    

    

    9. 

  9. Carefully make antennas and cables connected step by step as installation instructions show.
    10. 

  10. Put the new Seicane unit into your dashboard, double check if allconnections are correct and you’d better have a tidy for the cables.
    11. 

  11. Check whether the new Seicane unit is working well.
    12. 

  12. If there is no problem, firm removed screws and bolts that are put aside, then make trim panel back on your new Seicane unit.
    13. 



 


Wish the above installation guide for a 2013 2014 Subaru XR Forester Impreza GPS navigation is helpful. If there is any questions about the installation, please get help from a dealer or a professional. In addition, if you don’t have any suitable one, there is a recommended modern car radio for Subaru XR Forester Impreza head unit .Please check the link below for details.


http://www.seicane.com/9-inch-android-bluetooth-radio-for-2012-2013-2014-subaru-forester-with-3g-wifi-gps-navigation-system-tpms-dvr-obd-ii-rear-camera-aux-headrest-monitor-control-usb-sd-video-3g-wifi-capacitive-touch-screen-s081988


 


The Subaru XR Forester Impreza DVD Player with a large 9 inch 1024*600 multi-touch screen to facilitate,it is an ideal selection to upgrade your factory radio. The GPS function can direct you turn-by-turn and voice can avoid getting lost when you get to any unfamiliar location.You can also wirelessly sync your mobile phone using this unit to make and receive hands-free calls and stream music to have a journey filled with security and pleasure.


This 2013 2014  Subaru XR Forester Impreza Car GPS Navigation  comes with the latest Android Radio, RAM 2GB \ ROM 32GB \ Quad core , Support Carplay,RDS, SWC, XM radio APP etc. The steering wheel control still keep working after the installation of this excellent stereo.