Home › Archive for Installation › Page 6

Installation

car dvd player Installation

How to simply install a new 2015-2018 Toyota Sienna head unit with Capacitive Touch Screen USB SD Bluetooth 3G WiFi Video AUX

Posted on by — No Comments ↓ 7,340 views

2015-2018 Toyota Sienna car stereo GPS navigation  installation and removal guide as below will show you how to correctly and quickly install a new radio instead of old one by yourself. Or you also can easily get support from a professional to fix it.

2015-2018 Toyota Sienna car GPS DVD Player after installation

Precautions:

  1. Pleasepark the car in safe area and remove the negative cable on the vehicle battery before the remova
  2. A lever and a screwdriver need to be prepared before the installation.
  • 2015-2018 Toyota Sienna car radio installation guide
  1. Use a lever to pry along the plastic panel and remove it.
  2. Offthe panel under the 50 shift and hang it on the panel.
  3. Remove the a/c control unitrefer to the picture
  4. Unplug the back connectorsof the a/c control unit.
  5. Remove the screws holding the radio in place.
  6. Take the factory radio out of the dashboard.
  7. Disconnect the connectors at the back of factory radio.
  8. Make antennas and cables connected step by step asinstructions show, and be very careful when you are doing the installation.
  9. Put the new Seicane unit into your dashboardand check whether your connections are correct, once it’s done, you’d better to have a tidy for the cables.
  10. Check if the new Seicane unit is working well.
  11. If there is no problem, place screws andthen put trim panel back on the new Seicane unit.

Wish 2015-2018 Toyota Sienna car DVD Player installation and removal guide above is helpful.Surely you can ask for help if you could not handle it. I’d like to recommend you an excellent 2015-2018 Toyota Sienna car stereo from Seicane if you have not got suitable one yet. Go ahead and check the link below to have look:

http://www.seicane.com/10-2-inch-aftermarket-android-radio-gps-navigation-system-for-2015-toyota-sienna-with-capacitive-touch-screen-tpms-dvr-obd-ii-headrest-monitor-control-usb-sd-bluetooth-3g-wifi-video-aux-rear-camera-s082705

 

This 2015-2018  Toyota Sienna Car GPS Navigation  comes with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP etc. You can still keep the steering wheel control working after the installation of this fantastic stereo.

How to upgrade a 2007-2015 Mitsubishi LANCER head unit with GPS Navigation system Radio Capacitive Touch Screen HD 1080P Bluetooth

Posted on by — No Comments ↓ 14,726 views

Today’s tutorial article is talking about the installation and removal of 2007-2015 Mitsubishi LANCER car stereo.If you just got your new 2007-2015 Mitsubishi LANCER DVD Player,this article will be much more helpful for you by coincidence. Please check and follow detailed instructions blow step by step.

2007-2015 Mitsubishi LANCER car stereo after installation
2007-2015 Mitsubishi LANCER car stereo after installation

 

Warning :

1.Please park your car well and unplug the negative power cable to avoid any danger before you start up any work,

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

 

2007-2015 Mitsubishi LANCER GPS navigation installation guide

1.Open glove compartment (1-1) and remove screw to side panel (1-2).

 

1-1

1-1

 

1-2

1-2

2.Remove side panel by pulling toward seat.


3.Remove screw to trim panel and then gently pull trim piece toward seat.


4.Remove trim by using the tool or hands once trim piece is loose.

5.Multiple clips across trim carefully.

6.Do not remove these three screws marked on picture.

7.Gently pry edges around stereo face with panel removal tool.

8.After removing stereo face, place in safe location.

9.Disconnect the connector at the back.

10.Remove these four screws as below.

11.Move original stereo out little bit for access to harnesses behind it.

12.Remove smaller connector to give access to Seicane harnesses.

13.Insert Seicane harness into open port of new unit(13-1), connect removed harness to Seicane harness(13-2)

 

13-1

13-1

 

13-2

13-2

14.20-pin harness connects to Seicane unit.

15.Separate and test wire for +12v constant.

16.After confirmation of +12v constant, make connection with provided P-Tap, please ensure P-Tap has punctured wire and is tightly secured.

17.Fasten top cap to connect Yellow power wire.

18.Insert stripped wire as far as possible.

19.Gently secure cap and tug on wire to make sure it is secured.

20.After making cables connection, turn on stereo and test new Seicane unit till everything works well.

Hope this article helps you a lot with the installation for 2007-2015 Mitsubishi LANCER car radio.If you still have problem about it, please feel free to contact a dealer or professional for support. Surely you can check the link below for more information:

https://www.seicane.com/2014-2015-mitsubishi-lancer-android-radio-dvd-player-gps-navigation-system-bluetooth-hd-1024-600-touch-screen-mirror-link-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-steering-wheel-control-ipod-usb-sd-s168065g

 

This Mitsubishi LANCER head unit comes with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP etc. The awesome stereo can simply pair with your Bluetooth-enabled cell phone to have hands-free calls and stream music so as to make your journey more safer and enjoyable. Besides, you can also connect a rear-view camera with it to help you park more easily.

How to replace the factory car radio with a new one in details for 2004-2012 Opel Zafira/Vectra/Antara/Astra/Corsa car stereo?

Posted on by — No Comments ↓ 13,964 views

How to replace the factory car radio with a new one in details for 2004-2012 Opel  Zafira/Vectra/Antara/Astra/Corsa car stereo?

Too high labour costs to hire people to fix tings,especially in Western countries. A good way to deal with this situation is to learn by ourselves.As a result, writers of many kinds have appeared to share articles with different topics. Here’s item is to guide drivers to upgrade the car radios.The picture below shows the car interior dash image after installing a car head unit product for 2004-2012 Opel Zafira/Vectra/Antara/Astra/Corsa DVD Player from Seicane. I would like to give an direct example to show your guys how to remove the original radio and install a new nice one instead of it.

Precautions:

1.Please disconnect the power before the installation.

2.A lever and a screwdriver need to be prepared before the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible, so each related part of the unit can be fixed securely.

 

2004-2012 Opel Zafira/Vectra/Antara/Astra/Corsa car radio installation guide

1.Loose the trim panel with a removal tool and take it out as picture show.

2.Disconnect the connector at the back of the radio.

3.Take out the screws and place wires in order.

4.Pry the trim panel with a lever, and then release and remove it.

5.Plug antennas as the pictures show below.

6.Use a screwdriver to pull out the side panel, then take out lower side panel.

7.Make red long line insert down and up through the inner area by following the marked 1，2, then sort cables and interfaces.

8.Connect the red cable to the right position and re-install the side panel back.

9.Make connection for cables and interfaces between the new Seicane radio and the car refer to the wiring diagram.

10.Check if everything is going well after new car radio installation. Please check whether the connections are correct or not.

 

If the new radio works well for your car after installation which mainly introduces the detailed removal and installation steps. for 2004-2012 Opel Zafira/Vectra/Antara/Astra/Corsa GPS Navigation , then this article is the one you need exactly . If you still have any confusion about it , you’d better ask a professional for help. If you don’t find an ideal radio for your car, I’d like to recommend a modern model for 2004-2012 Opel Zafira/Vectra/Antara/Astra/Corsa car Stereo to you, please click:

https://www.seicane.com/android-2006-2011-opel-corsa-in-dash-dvd-navigation-system-with-hd-touch-screen-bluetooth-music-am-fm-radio-auto-a-v-obd2-mirror-link-aux-3g-wifi-steering-wheel-control-hd-1080p-video-backup-camera-s6924g

Above car radio for 2004-2012 Opel Zafira/Vectra/Antara/Astra/Corsa car Radio comes with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Build-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP etc. It will make you get to your desired destination within the least time, you can turn on the GPS function to get the lane assist, intelligent route planning, turn-by-turn direction and voice prompts for help. You can also make and receive hands-free calls without taking your hands off the steering wheel control for security via bluetooth connection with your enabled cell phone. Wish you can have a great time with it on all your trips. Good luck!

 

How to upgrade a 2013 2014 2015 Honda CRV high version head unit with screen 3G WiFi Touch Screen AUX Bluetooth HD 1080P Video

Posted on by — No Comments ↓ 4,899 views
2013 2014 2015 Honda CRV high version head unit after installation

To drive your beloved car to get to your destination, you must feel much enjoyable. To get more fun, you can easily install a new aftermarket head unit which can offer a lot of entertainment options. If you are a car owner of a 2013 2014 2015 Honda CRV high version, you must be familiar with the image below, which is an all-in-one 2013 2014 2015 Honda CRV high version head unit from Seicane. If you plan to upgrade your factory radio, then you can refer to the installation guide as follows.

2013 2014 2015 Honda CRV high version head unit after installation
2013 2014 2015 Honda CRV high version head unit after installation

 

 

Some tips before the installation:

  1. Please disconnect the power before the installation.
  2. Please prepare a lever and a screwdriver before the removal and the installation.
  3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

 

 

2013 2014 2015 Honda CRV high version head unit installation guide

1.Pry the below left control button with a screwdriver and then pry the right one.

2013 2014 2015 Honda CRV high version head unit installation step 1
2013 2014 2015 Honda CRV high version head unit installation step 1

 

2.Softly take out the panel.

2013 2014 2015 Honda CRV high version head unit installation step 2
2013 2014 2015 Honda CRV high version head unit installation step 2

 

3.Use a screwdriver remove two screws which lay in left and right sides of the top panel,and keep screws well for use again.

2013 2014 2015 Honda CRV high version head unit installation step 3
2013 2014 2015 Honda CRV high version head unit installation step 3

 

4.Prize the front of dashboard with a lever, after it was fastened remove it.

2013 2014 2015 Honda CRV high version head unit installation step 4
2013 2014 2015 Honda CRV high version head unit installation step 4

 

5.Remove this upper dashboard gently, you may still use screwdriver to help you.

2013 2014 2015 Honda CRV high version head unit installation step 5
2013 2014 2015 Honda CRV high version head unit installation step 5

 

6.Take out two screws which lay in left and right sides of downward place.

2013 2014 2015 Honda CRV high version head unit installation step 6
2013 2014 2015 Honda CRV high version head unit installation step 6

 

7.After these work,you can gently get the CD player out.

2013 2014 2015 Honda CRV high version head unit installation step 7
2013 2014 2015 Honda CRV high version head unit installation step 7

 

8.Plug all the cables which connected them.

2013 2014 2015 Honda CRV high version head unit installation step 8
2013 2014 2015 Honda CRV high version head unit installation step 8

 

9.Plug cables of the new Seicane head unit to car wires and firm the four screws to their original places.

  1. Check whether the new Seicane head unit is working without problem.

 

That’s all the installation guide for a 2013 2014 2015 Honda CRV high version head unit. If you have any questions, please seek help from your dealer or a professional. However, without any experience on the installation, it’s strongly suggested you have it installed by a professional. If you don’t have an ideal unit for your car, you can refer to this multifunctional 2013 2014 2015 Honda CRV high version head unit from Seicane, please click:

 

http://www.seicane.com/10-2-inch-2013-2014-2015-honda-crv-high-version-with-screen-android-radio-gps-navigation-system-3g-wifi-capacitive-touch-screen-tpms-dvr-obd-ii-rear-camera-aux-steering-wheel-control-usb-sd-bluetooth-hd-1080p-video-s083697

 

This Seicane Honda CRV high version head unit comes with the latest  GPS navigation system for you to upgrade your car radio. With the turn-by-turn direction and voice prompts, you can travel to anywhere you’d like or find a coffee shop easily. To keep safer and more relaxed during the whole journey, you can simply link with your bluetooth-enabled mobile phone to make hands-free calls and stream music.

 

Just find your way to your desired destination with this up-to-date Seicane Honda CRV high version head unit. Good luck!

 

10 easy steps to install a 2004-2011 Ford Focus MK2 head unit for MANUAL air condition with touch screen AUX 3G WiFi HD 1080P Video

Posted on by — No Comments ↓ 6,486 views

First shows you an intelligent 2004-2011 Ford Focus MK2 head unit from Seicane. It is equipped with a lot of advanced features for you to upgrade your factory radio.

2004-2011 Ford Focus MK2 head unit for manual air conditioner after installation
2004-2011 Ford Focus MK2 head unit for manual air conditioner after installation

 

Some of car owners may worry that the installation is too difficult, so that they do not easily replace their factory radio to for new features. As a matter of fact, it’s not too difficult to install a new head unit. With some related installation experience, you can easily finish the installation under the help of a correct installation guide. If you also have the same dashboard as the picture above, you can refer to the following instructions.

 

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

 

2004-2011 Ford Focus MK2 head unit installation

1·Remove the original console panel with a plastic knife, pry gently along the gap and pick up the panel. Then set it aside.

2004-2011 Ford Focus MK2 head unit installation step 1
2004-2011 Ford Focus MK2 head unit installation step 1

 

2·Remove the four screws that fixed the radio on the dashboard. Remove these screws will not be a difficult job.

2004-2011 Ford Focus MK2 head unit installation step 2
2004-2011 Ford Focus MK2 head unit installation step 2

 

3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

2004-2011 Ford Focus MK2 head unit installation step 3
2004-2011 Ford Focus MK2 head unit installation step 3

 

4·Unplug the connectors.

2004-2011 Ford Focus MK2 head unit installation step 4
2004-2011 Ford Focus MK2 head unit installation step 4

 

5·Remove the brackets on both sides of the factory radio. So far the removal of the factory radio is completed. Next steps will move to the installation of the Seicane head unit.

2004-2011 Ford Focus MK2 head unit installation step 5
2004-2011 Ford Focus MK2 head unit installation step 5

 

6·Install the brackets on both sides of the Seicane unit.

 

7·Dock the connectors of the original vehicle and the upgraded car audio.

2004-2011 Ford Focus MK2 head unit installation step 7
2004-2011 Ford Focus MK2 head unit installation step 7

 

8·Insert the wires to the appropriate location of the upgraded head unit. If you are not sure about how to wire correctly, you may refer to the wiring diagram for details.

 

9·Fix the Seicane aftermarket unit with the four screws.

2004-2011 Ford Focus MK2 head unit installation step 9
2004-2011 Ford Focus MK2 head unit installation step 9

 

10·Firm the console panel. Finally the new Seicane unit is installed and a comprehensive test should be conducted on the new radio.

2004-2011 Ford Focus MK2 head unit installation step 10
2004-2011 Ford Focus MK2 head unit installation step 10

 

That’s all the installation guide for a Ford Focus MK2 head unit. If there is any question, you can turn to your dealer or a professional for help. If you are a green hand on this, you can go to a car upgrade center to have it installed.

 

In addition, if you don’t have a correct head unit for your car, you need to find one which can fit your car very well. Here I’d like to recommend a great Ford Focus MK2 head unit from Seicane to you as a reference, please click:

 

http://www.seicane.com/10-2-inch-oem-android-radio-2004-2011-ford-focus-mk2-manual-air-condition-gps-navigation-system-bluetooth-capacitive-touch-screen-tpms-dvr-obd-ii-rear-camera-aux-3g-wifi-hd-1080p-video-headrest-monitor-control-usb-sd-s085690

 

This Ford Focus MK2 head unit comes with the latest 3D GPS navigation system can provide lane assist, 3D street view, landmark display, route planning, turn-by-turn direction and voice prompts for you to arrive at your destination with ease. You can play DVDs, CDs, VCD, FM/AM radio to keep relaxed all the way. For more flexible entertainment choices, you can utilize the USB or SD card connection to link with portable devices. Besides, hands-free calls and bluetooth music can also be available via bluetooth technology.

 

Wish you like this top Ford Focus MK2 head unit and have a wonderful time with it! Just take it and go right now!

 

How to replace a 2009-2014 Ford F150 F250 F350 Expedition car stereo with Sat Nav In Dash DVD Player

Posted on by — No Comments ↓ 5,874 views

As the technology is changing all the time, new car stereos for Ford F150 F250 F350 Expedition from 2009 to 2014 are upgrading with rapid development. No matter you are to catch the trend or just want the advanced features in your car, it’s great for you to install this amazing Seicane  Ford F150 F250 F350 Expedition car stereo for cars from 2009 to 2014, which is shown as follow. It comes with a lot of high-end practical features for you to enjoy more convenience and enjoyment on your way.

 

When you get an ideal car stereo for your car, you must want to install it in your car as soon as possible. Some of you may go to a car stereo upgrade center or ask a professional to install it. Few of car owners know the installation is actually not too difficult. With some related experience and a correct guide, you can easily finish the installation on your own. The following is the detailed installation instruction of a 2009-2014 Ford F150 F250 F350 Expedition car stereo for your reference.

 

Here are some tips for you before the installation:

1.Please make sure that you have disconnected the negative battery cable before starting the removal procedure.

2.In case of the power is on, please don’t do self-service or maintenance under condition that you have no experience.

3.When you are connecting the interfaces, make it as tidy as possible, for the space for it is very small.

 

2009-2014 Ford F150 F250 F350 Expedition car stereo installation guide:

1.Remove the rubber mat at the top of the stereo trim panel.

2009-2014 Ford F150 F250 F350 Expedition car stereo installation step 1
2009-2014 Ford F150 F250 F350 Expedition car stereo installation step 1

 

2.Take out the exposed 2 screws.

2009-2014 Ford F150 F250 F350 Expedition car stereo installation step 2
2009-2014 Ford F150 F250 F350 Expedition car stereo installation step 2

 

3.Fasten and remove the side panels containing the a/c vents away from the stereo trim panel. It’s not necessary to pull out the panels absolutely.

2009-2014 Ford F150 F250 F350 Expedition car stereo installation step 3
2009-2014 Ford F150 F250 F350 Expedition car stereo installation step 3

 

4.Loosen and remove the stereo trim panel.

2009-2014 Ford F150 F250 F350 Expedition car stereo installation step 4
2009-2014 Ford F150 F250 F350 Expedition car stereo installation step 4

 

5.All molex plugs should be unclipped.

2009-2014 Ford F150 F250 F350 Expedition car stereo installation step 5
2009-2014 Ford F150 F250 F350 Expedition car stereo installation step 5

 

6.Unscrew 4 screws to remove the factory radio.

2009-2014 Ford F150 F250 F350 Expedition car stereo installation step 6
2009-2014 Ford F150 F250 F350 Expedition car stereo installation step 6

 

7.Take out the original radio and disconnect all connectors at the back of the original radio.

2009-2014 Ford F150 F250 F350 Expedition car stereo installation step 7-1
2009-2014 Ford F150 F250 F350 Expedition car stereo installation step 7-1

 

2009-2014 Ford F150 F250 F350 Expedition car stereo installation step 7-2
2009-2014 Ford F150 F250 F350 Expedition car stereo installation step 7-2

 

8.Make antennas and cables of the new Seicane car stereo connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect the whole procedure.

  1. Put the new Seicane car stereo into the dash.
  2. Turn on the new Seicane car stereo and check whether the radio is working properly.
  3. Install screws and panels accordingly, and put everything into their original place.

 

The above is the step-by-step installation guide for 2009-2014 Ford F150 F250 F350 Expedition car stereo. Wish it can be helpful for you to install your new car stereo. Before the installation, one important thing should arouse your attention, which is to make sure your new car stereo can be seamlessly installed in your car. If you have no idea whether a car stereo can fit your car, I’d like to share a great Ford F150 F250 F350 Expedition car stereo from Seicane with you, please click:

 

http://www.seicane.com/seicane-s127303-quad-core-2009-2014-ford-f150-f250-f350-expedition-android-4-4-4-sat-nav-in-dash-dvd-player-with-3g-wifi-radio-rds-mirror-link-obd2-rearview-camera-hd-1080p-video-16g-flash

 

This car stereo is upgraded with an advanced Android 4.4.4 operating system and a great RK3188 1.6 GHz Cortex A9 Quad-core processor. You are able to enjoy a faster and more stable performance with this car stereo in your car.

 

The 3D navigation of high precision can guide you to any location with turn-by-turn directions and spoken guidance. You can keep your hands on the steering wheel control to make and receive calls to keep safe thanks to the Bluetooth functionality. Besides, you are also enabled to stream music for relaxation in this way.

 

Relax yourself in your car and enjoy your trips with this wonderful Ford F150 F250 F350 Expedition car stereo all the time from now on!

An easy installation guide of a 2003-2014 VW Volkswagen Transporter head unit with Mirror Link OBD2 DVD Player GPS

Posted on by — No Comments ↓ 5,263 views

If you want to have a more convenient and interesting driving experience, you can choose to upgrade your factory radio with a modern multifunctional head unit. Some of you may think it will cost a lot to do it. Actually, the installation can help you save a lot from upgrading a new head unit. With a detailed installation guide, you can achieve the installation on your own at your home. The below picture is a Seicane 2003-2014 VW Volkswagen Transporter head unit after installation, if you have the same dashboard, you can follow the below step-by-step guide.

2003-2014 VW Volkswagen Transporter head unit after installation
2003-2014 VW Volkswagen Transporter head unit after installation

 

There are some tips before installation:

  1. Ensure the power cable is disconnected for safety.
  2. Make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last before connecting.

 

2003-2014 VW Volkswagen Transporter head unit installation guide

  1. Remove the original radio with the unlock tools.
2003-2014 VW Volkswagen Transporter head unit installation step 1
2003-2014 VW Volkswagen Transporter head unit installation step 1

 

  1. Disconnect the harness at the back of the factory radio.
2003-2014 VW Volkswagen Transporter head unit installation step 2
2003-2014 VW Volkswagen Transporter head unit installation step 2

 

  1. Unplug the connectors.
2003-2014 VW Volkswagen Transporter head unit installation step 3
2003-2014 VW Volkswagen Transporter head unit installation step 3

 

  1. Disconnect the car radio wiring.
2003-2014 VW Volkswagen Transporter head unit installation step 4
2003-2014 VW Volkswagen Transporter head unit installation step 4

 

  1. Remove screws behind the console.
2003-2014 VW Volkswagen Transporter head unit installation step 5
2003-2014 VW Volkswagen Transporter head unit installation step 5

 

  1. Put the harness into the new Seicane head unit as user manual shows.
  2. Put the new Seicane head unit into dash.
  3. Turn on the new Seicane head unit to check if everything works well.
  4. Install the screws and put the new Seicane head unit into the dash.

 

That’s all the instruction on how to install a 2003-2014 VW Volkswagen Transporter head unit. Wish you can get some help for your installation. If it’s the first time for you to do it, you’d better make clear everything or do it under the guidance of a professional.

 

To upgrade your factory radio, you need to pick a suitable head unit for your, so that it can be perfectly installed and work well with your car. If you haven’t found one yet, I’d like to share an intelligent VW Volkswagen Transporter head unit from Seicane to you.

 

http://www.seicane.com/seicane-s127402-quad-core-android-4-4-4-2003-2014-vw-volkswagen-transporter-radio-bluetooth-in-dash-car-navigation-system-with-3g-wifi-mirror-link-obd2-cd-dvd-player-16g-flash-rearview-camera-canbus

 

This double din DVD player GPS navigation system with Android 4.4.4 is suitable for 2003-2014 VW Volkswagen Transporter. The built-in GPS navigation system can provide you with the world real-time traffic information to help you reach your destination faster than before.

 

A large 7 inch multi-touch screen with HD 1024*600 pixel resolution makes you easier to operate the map and watch the videos. Pairing your Bluetooth-enabled with this unit for hands-free calls can enhance your safety, and you can also relax yourself by streaming music. The USB/iPod connection allows you to have more choices to have fun according to your own preference.

 

Wish you have a good time with this VW Volkswagen Transporter head unit and good luck to you!

Installation instructions of a 2003-2011 VW Volkswagen Golf B5 B6 radio DVD Player GPS navigation with WIFI touch screen

Posted on by — No Comments ↓ 8,628 views

Without not much professional skills about cars, car owners can finish the installation on their own, which not only saves a lot of money but also makes themselves fill with sense of achievement. Therefore, if you are a car owner of 2003-2011 VW Volkswagen Golf B5 B6, you are able to install a VW Volkswagen Golf B5 B6 radio with the precise installation instructions which are shown as follows. However, if you are a total green hand on the installation ,it’s still suggested you ask for a professional technician for help.

 

Precautions:

  1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure security.
  2. A lever and a screwdriver need to be prepared before the installation.

 

Please refer to the below step-by-step removal and installation instructions for 2003-2011 VW Volkswagen Golf B5 B6 radio as a reference:

 

Step1: Remove the trim panel.

Please pry around the trim panel with a lever. While prying, please loosen the trim panel with your one hand. When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.

2003-2011 VW Volkswagen Golf B5 B6 radio installation step 1
2003-2011 VW Volkswagen Golf B5 B6 radio installation step 1

 

Step2: Remove the four screws on the radio.

Please unscrew the four screws which are holding the radio at four corners with a screwdriver. Then keep them well in a small box for the installation of a new head unit.

2003-2011 VW Volkswagen Golf B5 B6 radio installation step 2
2003-2011 VW Volkswagen Golf B5 B6 radio installation step 2

 

Step3: Take the factory radio out of the dash.

2003-2011 VW Volkswagen Golf B5 B6 radio installation step 3
2003-2011 VW Volkswagen Golf B5 B6 radio installation step 3

 

After the four screws are unscrewed, you can easily pull the factory out of the dash.

Step4: Disconnect the wiring harness.

Before you put the factory radio aside, please disconnect the wiring harness at the back of the factory radio.

2003-2011 VW Volkswagen Golf B5 B6 radio installation step 4
2003-2011 VW Volkswagen Golf B5 B6 radio installation step 4

 

Step 5: Connect the new Seicane car radio to the original wiring harness as the user manual or the wiring diagram shows.

Step 6: Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

Step 7: Put the new unit into the dash and install the four screws.

Step 8: Install the trim panel into its original place.

 

Wish the above installation guide can do some help for your upgrading. If you have any questions, it’s suggested you turn to a professional or your dealer for help. If you don’t have a suitable car radio for your car, I’d  like to share an amazing VW Volkswagen Golf B5 B6 radio from Seicane to you:

 

http://www.seicane.com/seicane-s09004-oem-android-4-4-4-gps-navigation-dvd-player-canbus-radio-for-vw-volkswagen-with-obd2-bluetooth-touch-screen-dvr-backup-camera-tv-usb-sd-hd-1080p-video-wifi-steering-wheel-control-quad-core-cpu-mirror-link

 

This unit is upgraded to Android 4.4.4 version and RK PX3 1.6 GHz Quad-core processor, so you can utilize the latest hardware and software for car stereos. With the built-in GPS navigation, you can arrive at any locations you like according to the turn-by-turn directions and the voice prompts. The Bluetooth technology lets you wirelessly link with Bluetooth-enabled devices for hand-free calls and streaming music. The rearview camera connectivity enables you to easily connect a back-up camera (as an option) to aid in parking.

 

Take this wonderful VW Volkswagen Golf B5 B6 radio on all your trips, an exciting and brand new driving experience will be always with you from now on!

Easy installation guide of a 2006-2013 Mercedes Benz R Class W251 radio with DVD player GPS navigation Bluetooth

Posted on by — 6 Comments ↓ 9,865 views

If you have a good car, you must want to install a remarkable car radio next, which can improve your car interior on one hand, on the other hand, the high-end configuration and intelligent features will bring you the exciting experience. When you install an ideal car radio in your car by yourself, you must have the sense of achievement. Then a professional guide of the installation is essential for you particularly when you don’t have much experience on that. This article will provide the detailed installation instructions of a 2006-2013 Mercedes Benz R Class W251 radio for you as a reference.

2006-2013 Mercedes Benz R Class W251 radio after installation
2006-2013 Mercedes Benz R Class W251 radio after installation

 

Before installing the new radio, there are some tips for you:

  1. Please disconnect the power before the installation.
  2. Please prepare a lever and a screwdriver before the removal and the installation.
  3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

 

The below is the step-by-step instruction on how to install a 2006-2013 Mercedes Benz R Class W251 radio:

  1. Pry out the air conditioner panel along gap with a lever.

    2006-2013 Mercedes Benz R Class W251 radio installation step 1
    2006-2013 Mercedes Benz R Class W251 radio installation step 1
  2. Remove the air conditioner panel.

    2006-2013 Mercedes Benz R Class W251 radio installation step 2
    2006-2013 Mercedes Benz R Class W251 radio installation step 2
  3. Remove two screws holding the stereo in the dashboard frame with a screwdriver.

    2006-2013 Mercedes Benz R Class W251 radio installation step 3
    2006-2013 Mercedes Benz R Class W251 radio installation step 3
  4. Pull the buckles down.

    2006-2013 Mercedes Benz R Class W251 radio installation step 4
    2006-2013 Mercedes Benz R Class W251 radio installation step 4
  5. Carefully take the original CD player out of the dashboard.

    2006-2013 Mercedes Benz R Class W251 radio installation step 5
    2006-2013 Mercedes Benz R Class W251 radio installation step 5
  6. Disconnect the ISO plug of the car in the socket of the DVD player.

    2006-2013 Mercedes Benz R Class W251 radio installation step 6
    2006-2013 Mercedes Benz R Class W251 radio installation step 6
  7. Connect the cables of the new Seicane radio as the user manual shows.
  8. Connect the ISO plug.
  9. Put the new Seicane radio back into the dash.
  10. Put the buckles back into its original place.
  11. Install two screws and the air conditioner panel.
  12. Turn on the new Seicane radio and have a comprehensive test if everything works well.

 

In the process of the installation, you may encounter some questions, it’s suggested you consult a professional or your dealer. There may be a little difference on the installation among different car years, but which won’t affect much on the whole. Since a fitting radio matters a lot, if you don’t have a new car radio yet, you can click the following link which is a wonderful 2006-2013 Mercedes Benz R Class W251 radio from Seicane:

 

http://www.seicane.com/all-in-one-android-4-4-4-2006-2013-mercedes-benz-r-class-w251-r280-r300-r320-r350-r500-r63-autoradio-gps-head-unit-1024-600-multi-touch-capacitive-screen-3g-wifi-bluetooth-dvd-mirror-link-obd2-backup-camera-k7510

 

This 2006-2013 Mercedes Benz R Class W251 radio comes with the latest pure Android 4.4.4 operating system and a powerful RK3066 1.6GHz Cortex A9 Dual-core CPU to enhance the capabilities, which you can enjoy a smoother and more stable operation than ever.

 

With the GPS navigation system to provide 3D street view, landmark display, voice prompts, route planning and turn-by-turn direction, you won’t get lost no matter wherever you go. The Bluetooth function allows you to link your enabled mobile phone with this unit to get access to hands-free calls and streaming music. Practical features like digital TV, DVR, OBDⅡ, mirror link, rearview camera, 3g module can all be compatible, you can add them to this unit as options to meet your different needs.

 

If there is an optic fiber, you can also add an optic fiber decoder to this unit to make your original car’s optic fiber and all your original car’s speakers work after installing this unit. The installation of this decoder is quite simple. And you can be provided the detailed instruction of it to make things easier. After the installation, you can enjoy the high-quality sound in your car.

 

Just take this 2006-2013 Mercedes Benz R Class W251 radio right now and go!

How to upgrade 2005 2006-2010 Nissan PATHFINDER Radio to touch screen bluetooth DVD player

Posted on by — 14 Comments ↓ 30,379 views

Before the installation, first show you the Seicane 2005-2010 Nissan PATHFINDER Radio.

2005-2010 Nissan PATHFINDER Radio after installation
2005-2010 Nissan PATHFINDER Radio after installation

Nissan PATHFINDER is absolutely good. In order to improve the in-car environment, most owners of Nissan PATHFINDER upgrade their factory radio. If you want to get a new aftermarket radio and replace your factory radio, you’d better read this essay patiently. Some of you may think it’s too hard to remove the factory radio, or some of you have already tried and failed. To be honest, This Nissan PATHFINDER Radio is easy remove. The new aftermarket radio in waving to you. And what are you waiting for? Here is professional instruction.

 

Some safety notes

1)Please apply the parking brake before the upgrade.

2)Please disconnect the negative cable on the vehicle battery to ensure security.

3)Please prepare tools for the upgrade. A lever and a screwdriver are needed.

4)Please protect the front seats and trim panel during upgrade.

2005-2010 Nissan PATHFINDER Radio installation

1)Disconnect the cable running to the negative battery terminal by loosening the nut on the cable clamp and pulling the cable off the negative terminal.

2)Remove the two screws above the Nissan PATHFINDER Radio opening with the head screwdriver.

2005-2010 Nissan PATHFINDER Radio installation step 1
2005-2010 Nissan PATHFINDER Radio installation step 1

3)Pull the radio trim panel off. You may need to wedge a flat tip screwdriver under the trim and pry up on it to remove the trim. Use a clean rag to protect the trim from being accidentally scratched while prying up on the trim.

2005-2010 Nissan PATHFINDER Radio installation step 2
2005-2010 Nissan PATHFINDER Radio installation step 2

4)Remove the four screws holding the radio in place using a head screwdriver and pull the radio out.

2005-2010 Nissan PATHFINDER Radio installation step 3
2005-2010 Nissan PATHFINDER Radio installation step 3

5)Disconnect the radio antenna in the back of the radio and unplug the electrical plugs running to the back of the radio.

2005-2010 Nissan PATHFINDER Radio installation step 4
2005-2010 Nissan PATHFINDER Radio installation step 4

 

Of course,there may have other situations.You’d better ask some professionals for help at the first time.If the steps of radio ramoval are too difficult to you,you should go to a car radio shop to remove your factory radio.

 

Some of you may haven’t got a suitable aftermarket radio for your Nissan PATHFINDER.Here is a good aftermarket car radio I want to share with you.It has many useful functions,such as bluetooth,3D navigation,car DVR and so on.More about this unit:

http://www.seicane.com/android-hd-1024-600-touch-screen-radio-gps-navigation-system-for-2005-2010-nissan-pathfinder-with-bluetooth-dvd-player-mirror-link-obd2-rearview-camera-dvr-tv-3g-wifi-usb-sd-ipod-1080p-video-s166226

You can dial, answer, reject and mute calls without taking your hands off the steering wheel. And you can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet, download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc and so on. So, have fun with your new Nissan PATHFINDER Radio.