How to install 2009 2010 2011 Mazda CX-7 navigation audio system with DVD player 3G WIFI

Posted on July 11, 2015 by car_stereo — No Comments ↓ 6,351 views

Firstly,you can have a look at following picture first: head unit after installation,dvd GPS navigation system support DVR SWC of 2009 2010 2011 Mazda CX-7.

Head unit after installation,dvd GPS navigation system support DVR SWC of 2009 2010 2011 Mazda CX-7

If you are one owner of Mazda CX-7 for 2009 2010 2011 and you are still using oem factory radio,then you can find that the trim panel of it is same with yours.It means that this unit fits your car if you are going to install a new stereo into it.

And this essay is just going to show you detailed steps on how to install 2009 2010 2011 Mazda CX-7 navigation audio system with DVD player 3G WIFI?Maybe most of you are more likely to make things convenient.But I guess you have not known much about it.

Don’t worry,because the whole process may only take about few minutes to finish it for professional person and it won’t be much difference when you are willing to install the unit by yourself,and you’d better do it according to right installation instructions.

You may need some tools for the mount during this process, such as a screwdriver, a lever and so on.The next part will be the installation operations for Mazda CX-7 navigation system.In order to make sure your safety,please remember to apply the parking brake and remove negative cable on car battery before you begin your actions.

Precautions about the installation:

1.Please read installation instructions from the dealer carefully if you have it

2.Please pay more attention on cables connection between the new unit and car,this is very important to your work

2009 2010 2011 Mazda CX-7 factory radio removal:

1.Use a firm lever to pry edges of trim panel

2.Remove trim panel after it is loosened totally

3.Take down these four screws which lay two on each side with a screwdriver

4.Remove original CD player and disconnect cables that connected them

5.Get down four screws,two as the picture show,and other two on the other side

6.After that remove these two screws and the same to the cable

7.Then you can remove the panel off white part

2009 2010 2011 Mazda CX-7 aftermarket stereo navigation system installation:

8.Connect your new stereo with car’s dashboard by plugging cables correctly and firming screws on it

9.Sort cables and the dvd player in,fix four screws that are set aside before

10.Cover your radio with other removed parts and turn on new radio to check whether your operations are all right

If you want to know more about this new unit,I suggest you to search for some information from related websites,for example:http://www.seicane.com/lcd-touch-screen-gps-radio-replacement-for-2009-2010-2011-mazda-cx-7-with-dvd-player-3g-wifi-bluetooth-music-dvr-steering-wheel-control-hd-1080p-ipod-iphone-aux-mp3-c097 .

The best way to install the head unit yourself is do it according to right guidance in order to ensure that your radio nav system can be used for longer time.This multimedia car stereo will surely make your usual life more colorful with those new functions and good maintain.

It’s possible that you meet some problems that can’t solve by yourself,you can ask someone who are professional in this field and wish you successful work.

Specific installation steps for 2009 Hyundai I20 navigation dvd with bluetooth 3G WIFI

Posted on July 4, 2015 by car_stereo — No Comments ↓ 5,267 views

In modern society car stereos are upgrading with a very fast speed to satisfy people’s higher and higher demands for it.Thus designers for Hyundai I20 try to manufacture more technical car stereos to have a good market.

At the same time,many owners of Hyundai I20 are willing to install a new head unit into their cars.But the question is to knwo the specific installation steps for 2009 Hyundai I20 navigation dvd with bluetooth 3G WIFI when you plan to do it yourself.

Before we talk about the details,let’s have a look at a picture first,which is head unit after installation,aftermarket GPS dvd navigation system of 2009 Hyundai I20.

Head unit after installation,aftermarket GPS dvd navigation system of 2009 Hyundai I20

You may have seen this unit before but don’t know whether it’s suitable for your car,actually there is an easy way to make a judgement.That is to see if original radio and new one’s trim panels are same.And this is the specialized Hyundai I20 navigation dvd that you needn’t to bother which one to choose.

Precautions before installation:

1.Please remember to finish your parking series before your installation

2.Please remember to disconnect the negative battery cable before starting stereo removal

3.Check out your factory radio unit include some related objects to car audio,and see whether everything is ok before your installation

After you have taken these notes in mind,next will comes to main part of this article.

2009 Hyundai I20 original audio system removal and navigation dvd installation:

1.Pry the lower part dashboard and increase one on right direction step by step with the help of levers,then continue to right side until you can fasten the dashboard

Use a lever to pry the lower part of dashboard

increase one on its right side step by step

2.Gently take out right-side dashboard,be careful and slow because the dashboard for it is tighter than usual one

3.After you have totally removed dashboard from the unit,you can easily remove the remaining part

4.This is the inside appearance of dashboard after removal

4.Disconnect all cables behind the radio

5.Make out these four screws,each side has two ones

6.Gently take factory CD player out

The removal process has been finished,the next step comes to installation work for Hyundai I20 aftermarket radio:

7.Remove the trim panel off the unit gently after you have removed screws on it,and then install new radio to right space

8.Firm screws and screw them beside the cd radio to fix it,make dashboard back to your car

If you are going to start your installation work after you know right steps,then you can ask a friend beside you to give you a hand,such as passing you a tool or make sure your safety during this process.Please do not do self-installation,service or maintain when you have no experience on it,it can be very dangerous.

Most of you should know little about usage of new unit,then you can get more information from related websites,for example: http://www.seicane.com/2009-hyundai-i20-autoradio-gps-sound-system-dvd-cd-player-bluetooth-music-tv-tuner-wifi-3g-aux-pop-reverse-camera-usb-sd-ipod-iphone-dvr-hd-1080p-video-c030 .

This new head unit for 2009 Hyundai I20 has increased some new functions,which brings us more convenience and entertainments.For example,the GPS navigation system can show 3D and google map on the screen when you entered a destination on it,then detailed map will be shown on the screen,it also has voice navigation,you will never get lost with this function.

How to install 2010 Toyota Raze navigation system with radio IPod 3-zone POP

Posted on June 27, 2015 by car_stereo — No Comments ↓ 2,061 views

Are you familiar with this image:navigation dvd car stereo of 2010 Toyota Raze?

Some of you may have seen this stereo when you are shopping in the car market,you want to take one home but you have no idea how to install it in your 2010 Toyota Raze.Or in other words,you don’t know how to remove original radio first.Doesn’t matter,today I will show you 10 steps on how to install 2010 Toyota Raze navigation system with radio IPod 3-zone POP.

It’s very easy to confirm information of cars like mode,size, years and so on,but if it’s about the detailed steps to mount a car audio system?Maybe very few people knows.

Before you upgrade your car’s stereo audio,you should ensure that the instructions for it are exactly right.And the general process can be like this:

1.Choose one unit that can be installed in your car.

2.Trying to collect precise installation guide from the Internet,TV,magazine or other media routes.

3.Chatting with workers who serves in this market and tell them what your doubt is about is one of ways that is normally used.And you may visit this website to get what you want by scanning and talking with them:http:http://www.seicane.com/8-inch-2010-toyota-raze-autoradio-gps-head-unit-3g-wifi-cd-dvd-player-dvr-bluetooth-music-tv-tuner-aux-steering-wheel-control-ipod-iphone-backup-camera-mp3-pop-c084.

If you hope to make your Toyota Raze cd player removal and dvd player installation more precise and safer, here are some advices about the installation and usage of the unit:

Precautions about the installation:

Please use your finger or touch screen pen to gently operate unit, do not use other objects include your fingers, if not it will cause damage to the screen;

Don’t do self-service,maintenance or install the unit please when you have no experience or knowledge about it,in case of the power is on.

2010 Toyota Raze factory stereo removal:

1.Before you start installation, remove negative terminal of battery

2.Unclip side panels from lower center console(beside shifter) with a panel removal tool

3.Use remove the plastic piece that’s contains the shifter override with a small flat blade screwdriver

4.Insert key into override move in gear and get out shift benzal piece

4.Remove 2 screws as the picture show

5.Take the below small dashboard out

6.Use a panel removal tool to unclip side panels from radio

7.Take out air vent and pull out hazard switch

8.This is 10mm hex head screws from stereo

9.Unclip connectors of the stereo and remove

2010 Toyota Raze aftermarket navigation installation:

10.Make connections on all the cables correctly and install the dvd navigation head unit in your car

Connecting all cables of Toyota Raze navigation installation is a work that you should be more careful because it is more complex than other steps itself and there are much fine wires.If you are not very sure about it,I suggest you to do it according to corresponding instructions,check it once again after you have finished it.Or you can ask someone to help you,who is professional at it and can make your work more perfect.

And I wrote another article which is about Toyota Verso radio

,hope you can get something that benefits you from it.

Easy installation steps for 2012 Toyota Hilux GPS dvd support BT 1080P Ipod

Posted on June 13, 2015 by car_stereo — 2 Comments ↓ 4,669 views

First of all,let’s have a look at following picture: car stereo autoradio after installation,GPS dvd sat nav system of 2012 Toyota Hilux.

If you would like to upgrade your car’s audio system,go to car market and willing to choose a fashionable Toyota Hilux GPS dvd.Please mind that the stereo must be suitable for your car,so you need to look carefully the radio’s trim panel to see if it’s same to your original one’s.

Next,you need to have a check for your car and make sure that you have turned off all car series and remember to unplug negative power cable before installation.

After doing all these,you need to learn how to do it if you are going to achieve it yourself.Don’t worry,it doesn’t need much skills but need you to be careful and I will show you easy installation steps for 2012 Toyota Hilux GPS dvd support BT 1080P Ipod.

2012 Toyota Hilux original head unit removal:

1.Turn off power switches as the picture show and remove three small covers in lower place

2.Take out the middle screw

3.Push in buttons a little on left and right side

4.Take trim panel off the radio

5.Disconnect cable behind it and take out two screws with a screwdriver

6.The cd radio after removal as the picture show

7.Release four screws that lay on two sides,remove them

8.Take out the CD player after four long screws have been removed

9.Disconnect wires behind the CD player

2012 Toyota Hilux GPS dvd installation:

When you have finished removing factory CD radio successfully with the help of removal guide,you can make a comparison between above removed one with yours,in order to make sure that you have done right disconnection.

As for the next work that is to install a new radio,you can read the installation instructions which is within your bought radio.There should be detailed introduction on how to make connection on all cables.

And I advise you to ask someone who is more professional to do it,after all it’s a little complex and matters much.If you feel confused or feel difficulty dealing with something,you can visit a website to have a detailed talk with workers there,for example: http://www.seicane.com/all-in-one-2012-toyota-hilux-dvd-gps-audio-system-radio-rds-tv-tuner-bluetooth-music-3g-wifi-ipod-1080p-auto-a-v-in-out-dvr-aux-pop-backup-camera-usb-sd-c143.

In fact car stereo upgrade is almost same in a large proportion,and it’s also normal to find some difference,you will solve it well only if you have made adequate preparations before you start up.

Some Precautions after installation:

1.If you want to clean the touch screen,please use a piece of clean and dry cloth and gently wipe it,do not use any liquid to wash it

2.Please do not stare at the machine especially when you are driving on a complex road,the video can bring you entertainments but not attentions or energy,so you’d better enjoy it only when you are free

3.Please pay more attention to the GPS dvd when your car is driving on a rainy day,for moisture may gather on it and cause damage to the system

Update a removal experience about 2007-2017 TOYOTA LAND CRUISER Car GPS Navigation System

Posted on June 3, 2015 by car_stereo — 2 Comments ↓ 308,282 views

Update a removal experience about 2007-2017 TOYOTA LAND CRUISER Car GPS Navigation System

Generally if people do not satisfy their car radios,mostly because the car factory head unit is lack of functions they need. To purchase a new advanced and modern car radio with expected foundations to replace the original one is kind of prior selection. That is the reason to write down the following article. As well you can ask a dealer or professional guy if you can not remove successfully by following the steps below. Good luck.

First of all, please note:

Please park the car in safe area and remove the negative cable on the vehicle battery before the removal
A lever and a screwdriver need to be prepared before the installation.

2007-2017 TOYOTA LAND CRUISER Car Stereo Removal

1.Take out the two blots that distributed on both sides of handbrake

2.Remove the screws with screws driver.

3.Take the left & right loosed dashboard out after the bolts are removed

4.Disconnect the cables on back between the left & right loosed dashboard

5.Take the screw out with removing tool.

6.Get out the screws which holding the CD Player on the dash.

7.Pull CD player off the unit

8.Unplug the cables behind carefully. (Wiring Diagram as reference)

Wish 2007-2017 TOYOTA LAND CRUISER car DVD Player installation and removal article is just what you need now.You can make your car more attractive with the touchable and multifunctional car radio for 2007-2017 TOYOTA LAND CRUISER from Seicane. If you have not shopped any good, please click the link below to get more information. Perhaps it would fit your car.

https://www.seicane.com/oem-android-dvd-player-for-2004-2016-toyota-land-cruiser-lc200-radio-replacement-with-touch-screen-gps-car-stereo-bluetooth-music-mirror-link-obd2-3g-wifi-video-backup-camera-s169009

This 2007-2017 Toyota LAND CRUISER Car GPS Navigation comes with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP etc. You can still keep the steering wheel control working after the installation of this fantastic stereo. Hopefully you shall a awesome experience with the new unit.

How to upgrade 2013 2014 Toyota Yaris stereo to 2 din radio dvd gps nav system

Posted on May 15, 2015 by car_stereo — 2 Comments ↓ 8,219 views

If you are going to upgrade your stereo of Toyota Yaris,then you can have a view at next image,it is new unit after upgrade,audio stereo GPS of 2013 2014 Toyota Yaris,which support TV Tuner Bluetooth Music 3G Wifi Rearview Camera.

new unit after upgrade,audio stereo GPS of 2013 2014 Toyota Yaris

In recent life most of the factory car stereos can hardly meet drivers’ needs,so the producers need to make improvements on the head unit include its appearance and features.

Before you can install it you need to remove original one first,you can ask a skilled person to do it,or you can also achieve it by yourself,facts shows it’s possible.So how to upgrade 2013 2014 Toyota Yaris stereo to 2 din radio dvd gps nav system?

Yes,a lot of car drivers have achieved this goal,but it doesn’t mean you can do it as you want.And before you begin any work,I advise you to do some preparations for this activity.

At first,you should find the right Toyota Yaris stereo for your car,next you need to know detailed instructions about the installation and know the unit as much as possible.Maybe you can visit some related websites,for example:http://www.seicane.com/oem-radio-navigation-system-for-2013-2014-toyota-yaris-with-dvd-cd-player-tv-tuner-bluetooth-music-3g-wifi-rearview-camera-c317.

There are also some notes for you to notice,you should do according to them,or it may cause damage to car or even people.For absolute security,you’d better let someone else who are professional to do.

Precautions before installation:

1.Please park your car in a safe place to make it smooth and before you turn off all car series,you can have a check to make sure everything is ok

2.Please remember to unplug negative power cable to avoid any danger during next process

3.Ensure that all fastened wires are isolated with electrical tape

2013 2014 Toyota Yaris radio removal and installation:

2013 2014 Toyota Yaris original stereo removal and new stereo installation:

1. Pry trim panel of the radio

2.Make four mounting screws out

3.Gently take out the CD player

4.Get these four screws out

5.Take out your hot new stereo unit

6.Have a check for QA’s seals

7.Get all transport screws out

8.Make your accessories inserted in

9.Get trim panels removed to install reversing cam

10.Have a test for that camera prior to drilling

11. Fix the screws that were removed from the original CD player to new unit

12.Install car other parts to their primary place

This stereo’s procedure may be a little more complex than other ones on connecting cables,but I believe that most of you have obtained it well with above 12 detailed steps and intuitive images.But you also need to know more specific things about this new unit to make better use of this new functional stereo.

Please be gentle and soft to your audio system when you are doing something with panels or other parts to avoid unnecessary destroy to your beloved car.The same to the time when you are removing original cd stereo and do cables disconnection.

Connecting cables is a very significant work during whole process.If you are not sure,you’d better ask other people to do this connection,in all words,take it serious when doing every operation.

How to install 2010 2011 2012 Peugeot 408 dvd gps radio with LCD Touch Screen Bluetooth Music

Posted on April 30, 2015 by car_stereo — No Comments ↓ 3,846 views

Head unit after installation,GPS radio with aftermarket sat nav system of 2010 2011 2012 Peugeot 408.You will see it in the following picture and can ensure that whether it’s suitable for your car.

Peugeot 408 dvd,GPS system of Peugeot 408,Peugeot 408 head unit

After judging match affair of this unit,next we need to solve the problem of how to install 2010 2011 2012 Peugeot 408 dvd gps radio with LCD Touch Screen Bluetooth Music.You may know a fact that Peugeot 408 radio installation is roughly identical from other cars’.

At first,you should make it clear that the audio you bought can be installed in your car.Next,we begin to set up a lot of things which concerns this Peugeot 408 dvd installation.

What actions can you do about it?Such as searching the Internet,for example,you can get more detailed information from next website: http://www.seicane.com/multimedia-dvd-gps-auto-a-v-system-for-2010-2011-2012-peugeot-408-with-lcd-touch-screen-bluetooth-music-am-fm-radio-tv-tuner-wifi-3g-aux-steering-wheel-control-c083.Or you can also ask a professional staff to check your original car series to see if everything is right.Because you’d better start your work under the condition that there is nothing wrong with factory stereo and then you can make a judgment whether your steps has errors,it’s good for you to make a adjustment when you find something wrong.

Next are the general steps for its installation,you can read them carefully and prepare some tools include pry tool and screwdriver and then you can start your work.

2010 2011 2012 Peugeot 408 cd player removal:

1.Open trim panel under the radio and remove it

2.Remove 4 screws with a screwdriver,which has 2 on each side

3.Then you can remove trim panel of original CD radio

4.Take this screw and the corresponding lower one out and two screws on the other side(total of 4)

5.Take CD player out and unplug cables behind it

6.Release and remove middle-position panel set

7.Make two removal tools inserted into higher panel,fasten it and the same to the other side and then remove it

This is removal process for Peugeot 408 audio,after this you still need continue to upgrade your radio stereo.

2010 2011 2012 Peugeot 408 dvd installation:

8.Please have a patient look at those wires and connectors,plug them one by one as right instructions show,which is very important to your installation

9.After correct cables connection,fix 4 screws to original place and install your dvd player into it

10.Fix 4 screws under the unit and install trim panels back to your car

11.With everything set well,turn on new radio and check all functions whether can operate properly

Precautions about the installation:

1.Before you install the unit,please have a check for radio appearance and its functions

2.It will arouse problem if you extend or shorten GPS antenna

3.Be careful not to make the GPS antenna winding the steering wheel and shift lever to avoid danger.

With help of Peugeot 408 dvd radio installation guide,and after you have noted these things and judge it’s safe to operate,then you can start to upgrade your stereo.If you feel difficulty doing some operations,you can also ask a professional worker to help you.

How to install 2004-2009 OPEL Astra gps radio with bluetooth music

Posted on April 13, 2015 by car_stereo — No Comments ↓ 5,827 views

Do you know how to install 2004-2009 OPEL Astra gps radio with bluetooth music?

Here is an image for car stereo after installation,dvd player with aftermarket navigation system bluetooth touch screen of 2004-2009 OPEL Astra.If the panel of your car radio is alike this one,it means that this unit can be installed in your beloved car.

car stereo after installation,dvd player with aftermarket navigation system bluetooth touch screen of 2004-2009 OPEL Astra

Recent car radio is upgrading with a very fast speed.Because the requirements of people to cars is getting higher,they hope that cars can bring them more entertainments when they are driving.So car radio become a main machine except the car itself.We know that factory stereo is operated mainly by button controls while car stereo nowadays has touch screen which can be worked with a touch screen pen.

More importantly,it has increased the gps navigation system.This is a very popular function that attracts a lot of people.Nowadays people have been accustomed to look for directions with sat nav system.When you entered in a destination,a map will occur on the screen and you only need to drive as the map points.

But what should we do to install this new radio with new functions?Don’t worry,we have general steps for this installation.

2004-2009 OPEL Astra car stereo removal and installation:

1.Insert removal tool into two holed on left side of car stereo

2.Insert removal tool into two holed on right side of car stereo

3.Grasp removal tools and pull car stereo from dash

4.Release trigger on connector to remove,remove antenna and car stereo

5.After that,you can remove under control buttons and disconnect the connector

6.remove the screw and the other corresponding one

7.remove trim panel by releasing the lower place first and then top of it

You see the removal steps can be very simple with removal tools and right removal guide,then we still need to continue and install the new unit into your car.

8.Plug all connectors of new stereo to the car’ correctly and firm screws that were removed

9.Install removed panels to the car,with all things done you can turn on your new radio and check whether this new unit can work or not

I believe that everything will be ok only if you can act the OPEL Astra gps installation procedure according to right installation guide step by step.It’s neither a hard thing,nor a thing that can only be finished by professional person,you can also achieve it by yourself.Of course,you should be careful and patient enough during this process,such as putting removed panels and screws in a safe place,be gentle when you are removing something to avoid any damage.

After you have installed new unit successfully and willing to drive it to enjoy your labor work,you may be not very familiar with those new functions,so you can visit next website for more detailed information about this unit:http://www.seicane.com/sat-navi-radio-replacement-car-a-v-system-for-2004-2009-opel-astra-support-dvr-file-management-with-3g-wifi-dvd-recoding-function-c019-2.

Here are some notes for you to attention after your radio mount,

Precautions after installation:

1.Do not pay too much attention on it when you are driving especially on a crowded road,it’s very dangerous

2.To ensure it can be used longer,please remember to use touch screen pen to operate it

3.If you want to clean up it,please use a clean cloth and gently tidy the surface,no any other liquid on it

How to install Mercedes Benz A Class W176 B Class W246 Head Unit GPS Navigation System

Posted on March 20, 2014 by seicane — 2 Comments ↓ 11,753 views

Nowadays,more and more owners are willing to install a GPS Navigation System in their cars.This fully shows that installing a GPS Navigation System is really necessary and convinent.But do you know how to install a GPS Navigation System for your car?Don’t worry,this article will tell you in some detail.Next,we will show you how to install Mercedes Benz A Class W176 B Class W246 Head Unit GPS Navigation System.

Announcements:Please check the appearance and the unit functions before install the unit.Don’t shorten or extened the GPS antenna,it will lead to the antenna problem.Don’t make the GPS antenna winding the steering wheel and shift lever,it will be dangerous.

Warm prompt:

1.Don’t use strong chemicals,cleaning agents,strong detergent to washing the machine.

2.Please use a clean soft fabric to wipe the screen,don’t use ordinary fabric.

3.Please use the touch screen pen to operation unit,please don’t use other sharp objects,or it will damage to the screen.

4.Please don’t self-service,maintenance or install the unit,in case of the power is on,don’t install or repair the unit,it is very dangerous if the person who did not receive the electronic equipment or vehicle installation training or lack of experienced personnel to install and repair the unit.

5.Please protect the original display when the staff dismounting the original CD and keep the original CD,try to use the original screw.

6.Navigation and rearview camera only to auxiliary function,it can’t replace your attention and judgment.

7.When the customer choose the digital TV,our unit could realized the digital TV touch.

Mercedes Benz A/B class Navigation & Audio System Installation Instruction Manual.

Mercedes Benz A/B class Navigation System Installation Manual

1.Original car console.

Original Mercedes Benz A/B class console

2.The accessories.

3.Remove the screws and take out the display screen.

Remove Mercedes Benz A/B class screws and take out the display screen

4.Remove the framework holder and the 3 fixed screws.

5.Remove the Air Conditioner vent.

6.Loose the CD fixed screws in left and right vents.

7.Pull out the left and right screws and remove the original CD,unplug the main cable connector.

8.Remove the storage box and decorative plate in the co-polit seat for wiring.

9.Connect our power cable to original CD’s connector,and plug our male connector to original CD.

10.Put the mini speaker to the central dashbord.

11.Plug the CAN BUS.

12.Fix the framework holder and tight the 3 fixed screws.

13.Connect the GND to the original CD’s shell.

14.Pull 2 original CD fixed screws and put back the original CD then tight the screws.

15.Plug the all cables and fix the head unit.

Setting sounds come out from original speakers

16.Picture after installation.

Steps to setting up the sounds come out and interface switching.

1.Setting sounds come out from original speakers.Enter into original CD main menu first,select the Audio interface by original knobs,enter into AUX interface,now the our head unit sounds come out from original speakers.

2.Setting the navigation sound come out from mini speaker while listening original CD and Radio.While in original CD or radio interface,press the navigation shortcut key in steering wheel control to enter into navigation interface.Now the original CD and radio play continued and the navigation sound come out from mini speaker.To use this shortcut key to foreground and background switching.

3.Touch the original menu to switch to our menu.

4.While in our menu,you can select the original functions to enter the original system.

Below is the video how to use the GPS Navigation System for Mercedes Benz A Class W176 B Class W246:

Through the detailed description,we believe that you have mainly grasped how to install Mercedes Benz A Class W176 B Class W246 Head Unit GPS Navigation System.For more information,please visit: http://www.seicane.com/8-inch-touch-screen-mercedes-benz-a-class-w176-head-unit-gps-navigation-system-with-usb-sd-ipod-canbus-aux-srd-8848 If you still have any problem on it,tell us and we will be happy to offer some help for you.At the same time,you will get a pleasant installation journey obviously.Then you will find how convinent and pefect when the GPS Navigation System comes in your car.At that moment,you will be proud of yourself for making such wise choice.Do you have a GPS Navigation System in your car? Why or why not?

How to install 1998-2004 Mercedes-Benz CLK-W209 DVD player with Special Optic Fiber Amplifier

Posted on November 2, 2013 by seicane — 10 Comments ↓ 13,291 views

If you original car’s amplifier has optic fiber,and your optic fiber looks like this one in following picture,then your original car’s Optic Fiber Amplifier is very special.We will tell you how to install 1998-2004 Mercedes-Benz CLK-W209 DVD player with Special Optic Fiber Amplifier.This installation instructions not only can be used in Mercedes-Benz CLK-W209 DVD player,but also can be used in all Mercedes-Benz series cars which has such special optic fiber amplifier.

Mercedes-Benz special optic fiber amplifier

Following is about all the accessories in the package for Mercedes-Benz CLK-W209 DVD player.You can find that these is one 6 meter long cable in the package.This one 6 meter long cable is for the cars with Optic Fiber Amplifier. You need to connec t this 6 meter long cable from front head unit to your car’s rear trunk.

Mercedes-Benz CLK-W209 DVD player 6 meter long cable for special optic fiber amplifier

When you are installing this aftermarket Mercedes-Benz CLK-W209 multimedia stereo,you may find that the cables is not compatible with your car.Please don’t be worry.Because Some Mercedes-Benz CLK-w209 has optic fiber and the installation will be a little complex.We can provide you more detailed instruction with photos about how to connect our cable to your plug.You don’t need to cut your original car’s wires,just need to cut our cables.Your original optic fiber amplifier will not work after installation.This Mercedes-Benz CLK-W209 DVD player has built-in amplifier,and can support 5 speakers in your car.It also will have very good sound.

1. Please use this 6 meter long cable as a speaker long cable.

W209 DVD player 6 meter long cable connection

2. Please cut this 6 meter long cable’s plug 2 and plug 3.

3. Please connect the short power cable to this unit’s back.

4. Please connect this 6 meter long cable plug 2’s 4 pair speaker cables to the short power cable. Just joint the same color together.

Mercedes-Benz CLK-W209 DVD player with Special Optic Fiber Amplifier power cable connection

5. Please connect this 6 meter long cable plug 3’s 4 pair speaker cables to your original car’s optic fiber amplifier plug’s 4 pair speaker cables:

Mercedes-Benz CLK-W209 DVD player Special Optic Fiber Amplifier plug speaker cables connection

Then the speaker cables are all connected well.To make this unit power on, you need to connect canbus connector B2 and B3-B6.

Mercedes-Benz CLK-W209 DVD player Special Optic Fiber Amplifier plug short power cable connection

There are 3 kinds of connections:

1+2+5

1+4+5

1+3+6

Please try all these 3 kinds of connections, and see which one can make this unit power on.

At last,1998-2004 Mercedes-Benz CLK-W209 DVD player with Special Optic Fiber Amplifier installation are finished.You can find that this is a wonderful Mercedes-Benz CLK-W209 DVD player.This is a video about how to use Mercedes-Benz CLK-W209 DVD player with Special Optic Fiber Amplifier:

This specialized China Top 2 din multimedia stereo can combined with your original car with Special Optic Fiber Amplifier perfectly.No need to cut your original car’s cables, just need to remove your Mercedes-Benz CLK-W209 original CD, and install this head unit. This Mercedes-Benz CLK-W209 DVD player’s detail information: http://www.seicane.com/car-dvd-player-for-mercedes-benz-clk-w209-with-gps-radio-tv-bluetooth-srd-8802-6 It will keep your steering wheel control works as original after replacement.Fit like OEM, Keep original Style, Upgrade Perfectly.GPS is brilliant for roads.Guidance with this aftermarket sat nav, you can go anywhere.Bluetooth is also so helpful.If you have any questions about installation,please send us photos about your original car’s plugs.Maybe we can make a wiring diagram for your car.If your car has special Optic Fiber Amplifier,then we will suggestion you read this article about how to install 1998-2004 Mercedes-Benz CLK-W209 DVD player with Special Optic Fiber Amplifier.After you read this article,I think you will be clear about how to remove and how to install.You will find you are proud when you install this Mercedes-Benz CLK-W209 DVD player with Special Optic Fiber Amplifier sucessfully.

Installation

How to install 2009 2010 2011 Mazda CX-7 navigation audio system with DVD player 3G WIFI

Specific installation steps for 2009 Hyundai I20 navigation dvd with bluetooth 3G WIFI

How to install 2010 Toyota Raze navigation system with radio IPod 3-zone POP

Easy installation steps for 2012 Toyota Hilux GPS dvd support BT 1080P Ipod

Update a removal experience about 2007-2017 TOYOTA LAND CRUISER Car GPS Navigation System

How to upgrade 2013 2014 Toyota Yaris stereo to 2 din radio dvd gps nav system

How to install 2010 2011 2012 Peugeot 408 dvd gps radio with LCD Touch Screen Bluetooth Music

How to install 2004-2009 OPEL Astra gps radio with bluetooth music

How to install Mercedes Benz A Class W176 B Class W246 Head Unit GPS Navigation System

How to install 1998-2004 Mercedes-Benz CLK-W209 DVD player with Special Optic Fiber Amplifier

Categories

Recent Posts

Pages

Recent Comments

Views

Archives

Meta

Blogroll

November 2024
M	T	W	T	F	S	S
« Sep
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30

Categories

Recent Posts

Pages

Recent Comments

Views

Archives

Meta

Blogroll

Tags