The step-by-step installation guide for a 2004-2010 Nissan VERSA Bluetooth gps dvd stereo with Android5.1.1 Touch Screen

Posted on by — No Comments ↓ 5,135 views
2004-2010 Nissan VERSA Bluetooth gps dvd stereo after installation

In the past you may spent money or time in arranging professionals to install car accessories for your car. But now it will save you a lot of money as well as time if you have the ability to change your original aftermarket or accessories especially a car stereo. Here is a detailed installation guide from Seicane for a 2004-2010 Nissan VERSA Bluetooth car stereo. It can be taken as reference for you if you want to try changing a new car stereo by yourself.

2004-2010 Nissan VERSA Bluetooth gps dvd stereo after installation
2004-2010 Nissan VERSA Bluetooth gps dvd stereo after installation

Here are 4 tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2004-2010 Nissan VERSA car stereo installation guide

1. Use a screwdriver to remove two screws above the Nissan Frontier radio.

Use a screwdriver to remove two screws above the Nissan Frontier radio
Use a screwdriver to remove two screws above the Nissan Frontier radio

2. Remove the trim panel.

Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel.

Remove the trim panel
Remove the trim panel

3. Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel.

Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel
Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel

4. Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio.

Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio
Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio

5. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit
Check all the accessories for the new Seicane head unit

6. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane head unit
Connect the harnesses to the back of the new Seicane head unit

7. Connect the Seicane head unit to your original car radio ‘s plugs.

8. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane head unit into the dash.

10. Put everything into their original place. All the installation is done.

 

Now for the installation of a car stereo, whether you have a certain degree of understanding or not? If you cannot successfully install your new car stereo, it will be a better idea to ask your dealer or professionals for help. One thing you have to pay more attention to is: you ought to have an ideal car stereo for your car. If you are still looking for a suitable one, please click the link below for more details.

http://www.seicane.com/2004-2010-nissan-versa-androi-dvd-player-gps-navigation-system-bluetooth-radio-hd-1024-600-touch-screen-mirror-link-obd2-dvr-tv-3g-wifi-usb-sd-rearview-camera-1080p-video-s166226

This latest 2004-2010 Nissan VERSA car stereo comes with functions, including 3D GPS navigation system, CD/DVD player, Bluetooth technology, rearview camera, etc, from which you can get a lot convenience. When you travel around a city, a smart car stereo with these features can not only guarantee your driving safety and comfort but also can provide you with an unforgettable holiday. If you like it, do not hesitate to take it home. Good luck to you!

The easy way to upgrade a 1998-2004 Mercedes Benz CLK Class C209 bluetooth dvd gps radio with Android 5.1.1 OBD2

Posted on by — No Comments ↓ 3,100 views

Look at the picture shown below, it’s the 1998-2004 Mercedes Benz CLK Class C209 bluetooth dvd gps radio after installation from Seicane. If you are the car owner of the Mercedes Benz CLK Class, this passage is worth for you to read it. I’d like to share a detailed installation guide for it and wish you can learn something from that.

1998-2004 Mercedes Benz CLK Class C209 bluetooth dvd gps radio after installation
1998-2004 Mercedes Benz CLK Class C209 bluetooth dvd gps radio after installation

 

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

1998-2004 Mercedes Benz CLK Class C209 bluetooth dvd gps radio installation guide

1. First detach the gear shift panel.

First detach the gear shift panel
First detach the gear shift panel

2. Remove the car charger and ashtray.

Remove the car charger and ashtray
Remove the car charger and ashtray

3. Use a screw driver to remove the screws under the A/C.

Use a screw driver to remove the screws under the A/C
Use a screw driver to remove the screws under the A/C

4. Pry the air conditioner panel out with a plastic lever.

Pry the air conditioner panel out with a plastic lever
Pry the air conditioner panel out with a plastic lever

5. Remove the original air conditioner panel.

Remove the original air conditioner panel
Remove the original air conditioner panel

6. Remove the heated seat and control panel assembly.

Remove the heated seat and control panel assembly
Remove the heated seat and control panel assembly

7. Remove the screws holding the radio.

Remove the screws holding the radio
Remove the screws holding the radio

8. Pull out the original car radio.

Pull out the original car radio
Pull out the original car radio

9. Disconnect the original harness.

Disconnect the original harness
Disconnect the original harness

10. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

11. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

12. Connect the Seicane car radio to your original car radio ‘s plugs.

13. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

 

If you can’t understand the steps above, you can turn to the dealer to ask for help. Or arrange the professional to install it. Before the installation, the most important thing is find the suitable car stereo for your car. If you are still looking for one, I’d like to recommend the newest 1998-2004 Mercedes Benz CLK Class C209 bluetooth dvd gps radio from Seicane to you as reference.

http://www.seicane.com/seicane-s127507-1998-2004-mercedes-benz-clk-class-c209-clk200-clk230-clk320-android-radio-dvd-navigation-system-with-bluetooth-music-mirror-link-obd2-3g-wifi-flash-hd-1024-600-multi-touch-screen

Featured with 3D high precision GPS and advanced Audio streaming via A2DP Bluetooth system, this multifunctional head unit enables you to enjoy the accurate guidance as well as play music from a mobile phone and make phone calls in the car easily. This amazing 1998-2004 Mercedes Benz CLK Class C209 bluetooth dvd gps radio is right choice for you and your car!

How to easily upgrade a 1996-2003 BMW 5 Series E39 bluetooth dvd navigation system support 3G WiFi Radio Mirror Link

Posted on by — 2 Comments ↓ 11,887 views

With the most up-to-date car stereo in your car, you can enjoy much fun and enjoyment on all trips. But how do I upgrade the old factory radio? Do I have to go to the stereo upgrade center or professionals to upgrade the radio? Absolutely not. In fact, you just need a step-by-step installation guide to learn the installation process. In here, I’d like to introduce a installation guide for a 1996-2003 BMW 5 Series E39 bluetooth dvd navigation system from Seicane to you. Wish you can get some help from that.

1996-2003 BMW 5 Series E39 bluetooth dvd navigation system after installation
1996-2003 BMW 5 Series E39 bluetooth dvd navigation system after installation

 

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

1996-2003 BMW 5 Series E39 bluetooth dvd navigation system installation guide

1. Use a plastic trim tool to remove trim strip.

Use a plastic trim tool to remove trim strip
Use a plastic trim tool to remove trim strip

2. Remove screws marked by red arrows.

Remove screws marked by red arrows
Remove screws marked by red arrows

3. Take out original DVD player of the car.

Take out original DVD player of the car
Take out original DVD player of the car

4. Pull out original power plug of the car.

Pull out original power plug of the car
Pull out original power plug of the car

5. Connect the power cables as the picture shows.

Connect the power cables as the picture shows
Connect the power cables as the picture shows

6. Remove screws in the spare tire in the trunk.

Remove screws in the spare tire in the trunk
Remove screws in the spare tire in the trunk

7. Take out the spare tire.

Take out the spare tire
Take out the spare tire

8. Remove four screws marked with red arrows.

Remove four screws marked with red arrows
Remove four screws marked with red arrows

9. Remove screws in triangle crutch.

Remove screws in triangle crutch
Remove screws in triangle crutch

10. Take out triangle crutch.

Take out triangle crutch
Take out triangle crutch

11. Connect original plug of the car with power plug of DVD GPS.

Connect original plug of the car with power plug of DVD GPS
Connect original plug of the car with power plug of DVD GPS

12. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit
Check all the accessories for the new Seicane head unit

13. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane head unit
Connect the harnesses to the back of the new Seicane head unit

14. Connect the Seicane head unit to your original car radio ‘s plugs.

15. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16. Put the new Seicane head unit into the dash and install the four screws.

17. Install the trim panel into its original place.

 

All above is the detailed installation guide for a 1996-2003 BMW 5 Series E39 bluetooth dvd navigation system. If you don’t have any experience of installation or any problem with this guide, you can go to the dealer ask for help. Or arrange the professional to install it directly. In addition, you have to find the suitable car stereo for your car at first. Do you have the suitable car stereo? If you don’t have one, this multifunctional 1996-2003 BMW 5 Series E39 bluetooth dvd navigation system from Seicane is one of your best choice. You can click this link to check it:

http://www.seicane.com/seicane-s12753-android-sat-nav-stereo-for-1996-2003-bmw-5-series-e39-520i-523i-525i-m5-with-hd-1024-600-multi-touch-screen-3g-wifi-dvd-bluetooth-radio-mirror-link-obd2

With the most up-to-date intelligent pure android 5.1.1 operation system, you can count on its latest built-in 3D GPS and voice prompts to enter the correct direction of the destination. A variety of additional entertainment features can also bring you a wonderful and relaxing journey that you never ever had before. Wish you like it and enjoy the good time with it from now!

9 easy steps to install a 2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo with 3G WiFi DVR Tuner

Posted on by — 9 Comments ↓ 9,564 views
2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo after installation

Are you looking for a detailed installation guide in order to install the new car head unit in your car? If you are looking for the installation guide, this article is worth for you to read it. In the following, I’d like to share a detailed installation guide for a 2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo from Seicane with you. Here is the picture after the installation.

2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo after installation
2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo installation guide

1. Release the panel from the gearlever by your hands.

Release the panel from the gearlever by your hands
Release the panel from the gearlever by your hands

2. Remove the cigarette lighter and put it aside.

Remove the cigarette lighter and put it aside
Remove the cigarette lighter and put it aside

3. Remove two screws under the CD changer and take out the CD changer.

3-1.Remove two screws under the CD changer and take out the CD changer
3-1.Remove two screws under the CD changer and take out the CD changer
3-2
3-2

4. Remove the two screws under the original radio.

Remove the two screws under the original radio
Remove the two screws under the original radio

5. Pull out the original radio and disconnect the wires.

5-1.Pull out the original radio and disconnect the wires
5-1.Pull out the original radio and disconnect the wires
5-2
5-2

6. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit
Check all the accessories for the new Seicane head unit

7. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane head unit
Connect the harnesses to the back of the new Seicane head unit

8. Put the new Seicane unit into the dash.

9. Turn on the new Seicane unit and have a comprehensive check if it works well. If not, please check whether all the cables are connected correctly.

 

All above is the detailed installation guide for a 2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo and wish you can learn something from it. If you don’t have any experience of installation, it suggests you to the dealer or professional ask for help. Besides, it’s very important for you to find the suitable car head unit at first. If you don’t have one yet, I’d like to introduce a newest 2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo from Seicane to you and wish you like it.

http://www.seicane.com/seicane-s127501-android-car-stereo-dvd-gps-system-for-2002-2008-mercedes-benz-e-class-w211-e200-e220-e230-e240-with-bluetooth-radio-tuner-3g-wifi-mirror-link-obd2-rearview-camera-dvr-s127501

The 2002-2008 Mercedes Benz E Class W211 Sat Navi radio stereo of high quality with a 7 Inch touch screen, GPS and Bluetooth connectivity is a great discount priced in-car entertainment system that offers all the latest features, including 3D navigation, Bluetooth, CD DVD player, radio tuner, office tools, file management, etc. Have a good time with it from now!

How to skillfully replace a 2003-2010 Toyota Avanza stereo gps audio system with DVD player TV USB

Posted on by — No Comments ↓ 4,078 views
2003-2010 Toyota Avanza stereo gps audio system after installation

What will you do when you are stuck in a traffic jam? Do you want to listen your favorite music and surf internet during this time? Now, you can enjoy all of this and best experience from the most up-to-date car stereo. In here, I’d like to introduce a detailed installation guide for a 2003-2010 Toyota Avanza stereo gps audio system from Seicane and you can take this as reference.

2003-2010 Toyota Avanza stereo gps audio system after installation
2003-2010 Toyota Avanza stereo gps audio system after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2003-2010 Toyota Avanza stereo gps audio system installation guide

1. Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside
Remove two trim panels at each side of the center console and set it aside

2. Remove the top panel and set it aside.

Remove the top panel and set it aside
Remove the top panel and set it aside

3. Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver
Remove 4 screws holding the unit with a Phillips screwdriver

4. Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface
Gently take out the panel on the radio interface

5. Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it
Take out the radio and disconnect cables at back of it

6. Check all the accessories for the new Seicane head unit.

7. Connect the harnesses to the back of the new Seicane head unit.

8. Connect the Seicane head unit to your original car radio ‘s plugs.

9. Put the new Seicane head unit into the dash.

10. Turn on the new Seicane head unit and have a comprehensive check if it works well.

11. Install 4 screws back to their original position.

12. Install the trim panel back to its original place.

 

After reading this installation guide for a 2003-2010 Toyota Avanza stereo gps audio system, wish you can learn something from that and try to install it by yourself. If you find the picture shown above is different from your dashboard, please rest assured that the installation guide is much same. Or you can go the dealer or professional to ask them install it directly. Moreover, you have to make sure the new car stereo can work well in your car. If you don’t have one yet, I’d like to share a wonderful 2003-2010 Toyota Avanza stereo gps audio system from Seicane with you.

http://www.seicane.com/android-car-stereo-bluetooth-gps-navigation-system-for-2003-2010-toyota-avanza-with-dvd-player-mirror-link-hd-touch-screen-obd-dvr-rearview-camera-tv-usb-sd-radio-3g-wifi-ipod-s166229

This most up-to-date 2003-2010 Toyota Avanza stereo gps audio system is the best replacement for the factory radio. The Bluetooth technology let you wirelessly pair with your Bluetooth-enabled cell phones for hands-free calls and streaming music to have a safe and cheerful journey. Wish you like it!

A detailed installation guide for a 2005-2010 Toyota Fortuner head unit with 3G WIFI Radio GPS navigation DVD TV USB

Posted on by — No Comments ↓ 3,723 views
2005-2010 Toyota Fortuner head unit after installation

In our daily life, the network is becoming more and more important. Without the network, we can’t get the latest news and communicate with people immediately. Do you want to surf the internet and download the apps freely in your car? If you want, the best choice for you is to upgrade old factory radio to a multifunctional new head unit. Here, I’d like to share a detailed installation guide for a 2005-2010 Toyota Fortuner head unit from Seicane. You can take it as reference.

2005-2010 Toyota Fortuner head unit after installation
2005-2010 Toyota Fortuner head unit after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2005-2010 Toyota Fortuner head unit installation guide

1. Remove the panel with a lever on the both side and disconnect the wire.

1-1. Remove the panel with a lever and pull it away from dash
1-1. Remove the panel with a lever and pull it away from dash
1-2
1-2

2. Unscrew the four bolts holding the original car radio.

Unscrew the four bolts holding the original car radio
Unscrew the four bolts holding the original car radio

3. Take out the car radio and disconnect the wire harness at the back of the unit.

3-1. Take out the car radio and disconnect the wire harness at the back of the unit
3-1. Take out the car radio and disconnect the wire harness at the back of the unit
3-2
3-2

4. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

5. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

6. Connect the Seicane car radio to your original car radio ‘s plugs.

7. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

8. Put the new Seicane radio into the dash.

9. Put everything into their original place. All the installation is done.

 

All above is the detailed installation guide for a 2005-2010 Toyota Fortuner head unit from Seicane. If you don’t have any experience of installation, it suggests you arrange the dealer or profession to install it directly.

In addition, the first thing for you to do is find a suitable head unit for your car. If you are looking for one, this is a link of newest 2005-2010 Toyota Fortuner head unit from Seicane for your reference:

http://www.seicane.com/2005-2010-toyota-fortuner-android-radio-gps-navigation-dvd-player-touch-screen-obd-dvr-rearview-camera-tv-usb-sd-3g-wifi-bluetooth-cpu-mirror-link-ipod-s166957

This multimedia 2005-2010 Toyota Fortuner head unit supports surfing internet via 3G or WiFi. You can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet. Wish you like it!

How to upgrade a 2009-2013 Toyota PRIUS right head unit with Bluetooth touch screen OBD DVR Backup camera TV USB SD 3G WIFI IPOD

Posted on by — 4 Comments ↓ 9,397 views
2009-2013 Toyota PRIUS right head unit after installation

How can I improve my car interior environment? How can I get extraordinary driving experience? The best way for you is to upgrade your old factory radio. It’s not only improve your car interior environment, but also bring convenience and entertainment feature to you. So, the detailed installation instruction is necessary for the car owner. I’d like to share a detailed installation instruction for a 2009-2013 Toyota PRIUS right head unit from Seicane with you and you can take it as reference.

2009-2013 Toyota PRIUS right head unit after installation
2009-2013 Toyota PRIUS right head unit after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

Toyota PRIUS right head unit installation instruction

1. Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool.

Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool
Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool

2. Remove the dash panel below the stereo. Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash.

Remove the dash panel below the stereo
Remove the dash panel below the stereo

3.Remove the vent panel to the right of the stereo as you did the left panel. It is only connected with clips that can be pulled free with moderate force.

Remove the vent panel to the right of the stereo as you did the left panel. It is only connected with clips that can be pulled free with moderate force
Remove the vent panel to the right of the stereo as you did the left panel. It is only connected with clips that can be pulled free with moderate force

4. Disconnect the wiring.

Disconnect the wiring
Disconnect the wiring

5. Remove the stereo by removing the four screws near the corners of the stereo mounting bracket with a Phillips-head screwdriver.

Remove the stereo by removing the four screws near the corners of the stereo mounting bracket with a Phillips-head screwdriver
Remove the stereo by removing the four screws near the corners of the stereo mounting bracket with a Phillips-head screwdriver

6. Pull the radio toward you slowly.

Pull the radio toward you slowly
Pull the radio toward you slowly

7. Pull the stereo from its dock and pull the wire groups from the back of the stereo. Grab the groups by the white plastic wire binders, not the wires themselves.

Pull the stereo from its dock and pull the wire groups from the back of the stereo. Grab the groups by the white plastic wire binders, not the wires themselves
Pull the stereo from its dock and pull the wire groups from the back of the stereo. Grab the groups by the white plastic wire binders, not the wires themselves

8. Check all the accessories for the new Seicane car radio.

9. Connect the harnesses to the back of the new Seicane car radio.

10. Connect the Seicane car radio to your original car radio ‘s plugs.

11. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane radio into the dash.

13. Put everything into their original place.

That’s all the detailed installation instruction for a 2009-2013 Toyota PRIUS right head unit. If you find it is hard to install by yourself, it suggests you to the dealer ask for help or arrange the professional to install it. If the picture shown above is different from your dashboard, please rest assured that the instruction is much same. Besides, you have to find the suitable head unit for your car. If you don’t have one, here is the wonderful 2009-2013 Toyota PRIUS right head unit from Seicane to recommend.

http://www.seicane.com/android-in-dash-car-dvd-player-radio-gps-navigation-system-for-2009-2013-toyota-prius-right-with-bluetooth-touch-screen-obd-dvr-backup-camera-tv-usb-sd-3g-wifi-ipod-mirror-link-s168004r

This hot 2009-2013 Toyota PRIUS right head unit is loaded with a powerful 1.6 GHz Cortex A9 Quad-core to enhance the processing ability for users. The hard disc capacitance up to 16G allows more information and database to be processed in this head unit. You will be accurately guided to anywhere you like with its 3D precise GPS and enjoy yourself with a multiple entertainment options supported by it while you are driving. Enjoy a good time with it from now!

A step-by-step installation guide for a 2009-2012 MAZDA 5 car stereo with GPS navigation DVD player Radio Mirror link multi-touch screen

Posted on by — 2 Comments ↓ 9,017 views

Do you want to get more new features in your car? Do you want to enjoy the convenience and entertainment from the most up-to-date car stereo? If you want, it’s time for you to replace your factory car radio. Here is a step-by-step installation guide for a 2009-2012 MAZDA 5 car stereo from Seicane. If you are the car owner of MAZDA 5, you can take it as reference and wish it can help you.

2009-2012 MAZDA 5 after installation
2009-2012 MAZDA 5 after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009-2012 MAZDA 5 car stereo installation guide

1. Unclip and remove the cup holder panel in the center console.Unclip and remove the cup holder panel in the center console

2. Unclip and remove the small pocket panel on the back of the center console behind shifter.

2-1. Unclip and remove the small pocket panel on the back of the center console behind shifter
2-1
2-2
2-2

3. Remove (2) 8mm bolts under cup holder panel holding the back half of the center console to the front half.Remove (2) 8mm bolts under cup holder panel holding the back half of the center console to the front half

4. Unscrew and remove the shift knob.Unscrew and remove the shift knob

5. Unclip and remove the shifter trim panel.Unclip and remove the shifter trim panel

6. Unclip and remove the shifter trim panel.

6-1. Unclip and remove the shifter trim panel
6-1
6-2
6-2

7. Unclip and pull back the panels at the lower front sides of the center console.Unclip and pull back the panels at the lower front sides of the center console

8. Remove (2) Phillips screws from both sides (total of 4) of the front lower half of the center console.

8-1. Remove (2) Phillips screws from both sides (total of 4) of the front lower half of the center console
8-1
8-2
8-2

9. Unclip and remove the vent panel including the hazard switch above the factory radio.Unclip and remove the vent panel including the hazard switch above the factory radio

10. It’s easier to remove 2 screws by setting this piece on the top of the dash.Its easier to remove 2 screws by setting this piece on the top of the dash

11. Remove 2 screws from behind the shifter trim.Remove 2 screws from behind the shifter trim

12. Pull center console toward, this will help gain access to 2 screws under the climate controls.Pull center console toward, this will help gain access to 2 screws under the climate controls

13. Remove 2 screws.Remove 2 screws

14. Unclip harness and pull rear center console backwards.Unclip harness and pull rear center console backwards

15. Press in shifter release trigger and pull shifter down, make sure to have e brake on.Press in shifter release trigger and pull shifter down, make sure to have e brake on

16. Press in side prongs to release climate controls.Press in side prongs to release climate controls

17. Remove one screw and one (10mm) bolt.Remove one screw and one (10mm) bolt

18. Pull factory stereo out to release clips, then unplug original radio’s connectors.Pull factory stereo out to release clips, then unplug original radio’s connectors

19. Check all the accessories for the new Seicane car radio.

20. Connect the harnesses to the back of the new Seicane car radio.

21. Connect the Seicane car radio to your original car radio ‘s plugs.

22. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

23. Put the new Seicane radio into the dash.

24. Put everything into their original place. All the installation is done.

That’s all the step-by-step installation guide for a 2009-2012 MAZDA 5 car stereo and wish you can get some help from it. If you don’t have any experience or problem, please go to the dealer or professional ask for help or arrange them to install it directly. Moreover, the most important thing before the installation is to find a right car stereo which can work well in your car. If you are still looking for one, here I’d like to introduce a wonderful 2009-2012 MAZDA 5 car stereo from Seicane to you:

http://www.seicane.com/2009-2012-mazda-5-android-gps-navigation-system-with-dvd-player-radio-mirror-link-multi-touch-screen-obd-dvr-rear-view-camera-tv-3g-wifi-usb-sd-bluetooth-ipod-s168005

This great 2009-2012 MAZDA 5 car stereo coming with intelligent pure android 5.1.1 operation system, 8 inch HD 1024*600 multi-touch screen with smooth operation, High Speed 3G&WiFi Internet, Bluetooth functions, 3D Navigation, CD DVD player, 32GB USB/SD Connection and so on. It can meet most of your needs after you install it in your car. Just purchase it and enjoy your driving from now!

How to easily install a 2010 Ford Tourneo Connect car stereo with Autoradio GPS Navigation DVD Player TV 3G WIFI Mirror link 16G Flash

Posted on by — No Comments ↓ 3,430 views

With the development of technical, the car stereo are upgrading quickly. The car stereo has more and more new functions in it. If you want to enjoy the convenience and comfort when you driving, the best choice for you is to upgrade the factory radio. In this article, I’d like to share the installation instruction for a 2010 Ford Tourneo Connect car stereo from Seicane. If you are the car owner of Ford, you can take it as reference.

2010 Ford Tourneo Connect after installion
2010 Ford Tourneo Connect after installion

Here are some tips for you before the installation:

1.Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.

2.A lever and a screwdriver need to be prepared before the installation.

3.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2010 Ford Tourneo Connect car stereo installation guide

1. Rmove the panel with a lever on both sides.

Rmove the panel with a lever on both sides
Rmove the panel with a lever on both sides

2.Remove the panel around shift-lever, parking-brake lever and centre console.

2-1.Remove the panel around shift-lever, parking-brake lever and centre console
2-1.Remove the panel around shift-lever, parking-brake lever and centre console
2-2
2-2

3. Unscrew the screws around the trim panel with a screwdriver.

3-1. Unscrew the screws around the trim panel with a screwdriver
3-1. Unscrew the screws around the trim panel with a screwdriver
3-2
3-2

4. Take the panel off the dash and disconnect the wires from the car.

Take the panel off the dash and disconnect the wires from the car
Take the panel off the dash and disconnect the wires from the car

5. Unscrew four screws holding the original radio.

Unscrew four screws holding the original radio
Unscrew four screws holding the original radio

6. Take out the unit and disconnect the wire harness at the back of the unit.

Take out the unit and disconnect the wire harness at the back of the unit
Take out the unit and disconnect the wire harness at the back of the unit

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio ‘s plugs.

10. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t,

please check whether all the cables are connected correctly.

11. Put the new Seicane radio into the dash.

12. Put everything into their original place.

The above is the installation instruction for a 2010 Ford Tourneo Connect car stereo. It’s not difficult for you to install it by yourself. But if you don’t have any experience, it suggest you to the dealer or professionals ask for help.

In addition, it is very necessary for you to find the suitable car stereo. I’d like to introduce a wonderful 2010 Ford Tourneo Connect car stereo from Seicane. If you are looking for a new car radio now, wish you will like it.

http://www.seicane.com/aftermarket-android-autoradio-gps-dvd-player-navigation-system-for-2010-ford-tourneo-connect-with-bluetooth-music-hd-touch-screen-obd-dvr-usb-sd-rear-view-camera-tv-3g-wifi-ipod-mirror-link-s167017

This great aftermarket Android 5.1.1 Auto radio GPS DVD player navigation system is specially manufactured for 2010 Ford Tourneo Connect. The built-in GPS and the Bluetooth functionality allow you to navigate as well as enjoy music at the same time. It will switch to navigation voice prompts automatically when it is playing music. Other entertainment options such as playing DVD, CD, FM/AM radio tuner and IPod are also supported, you are sure to feel relaxed and stress free with this car stereo on your way. The installation is quite easy and just plug and play. You don’t need to modify or cut any wire to install it. To enjoy your trips from now!

How to remove a 2005 2006 2007 Jeep Grand Cherokee(W/Factory NAV) car stereo with Bluetooth Music TV IPOD IPhone USB SD MP3 AUX Rearview Camera

Posted on by — No Comments ↓ 7,430 views
2005 2006 2007 Jeep Grand Cherokee(W Factory NAV) car stereo after installation

Given a step-by-step installation guide for you, can you achieve the installation on your own? If not, please don’t worry, you can also have a professional install it. Please look at the picture below, if you also have the same dashboard, you can follow this detailed 2005 2006 2007 Jeep Grand Cherokee(W/Factory NAV) car stereo installation instruction.

2005 2006 2007 Jeep Grand Cherokee(W Factory NAV) car stereo after installation
2005 2006 2007 Jeep Grand Cherokee(W Factory NAV) car stereo after installation

Tips about the installation: 

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005 2006 2007 Jeep Grand Cherokee(W/Factory NAV) car stereo installation steps

1.Loosen the trim panel with a lever.

Loosen the trim panel with a lever
Loosen the trim panel with a lever

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car
2-1.Take the panel off the dash and disconnect the wires from the car
2-2.Take the panel off the dash and disconnect the wires from the car
2-2.Take the panel off the dash and disconnect the wires from the car

3.Remove the four screws which are holding the unit with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver
Remove the four screws which are holding the unit with a screwdriver

4.Take out the unit and disconnect the wire harness at the back of the unit.

4-1.Take out the unit and disconnect the wire harness at the back of the unit
4-1.Take out the unit and disconnect the wire harness at the back of the unit
4-2.Take out the unit and disconnect the wire harness at the back of the unit
4-2.Take out the unit and disconnect the wire harness at the back of the unit

5.Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car stereo to your original car radio ‘s plugs.

7-1. Connect the Seicane car stereo to your original car radio 's plugs
7-1. Connect the Seicane car stereo to your original car radio ‘s plugs
7-2. Connect the Seicane car stereo to your original car radio 's plugs
7-2. Connect the Seicane car stereo to your original car radio ‘s plugs

8.Put the new Seicane car stereo into the dash.

9.Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10.Put trim panel back on your new Seicane car stereo after the normal test.

Wish the 2005 2006 2007 Jeep Grand Cherokee(W/Factory NAV) car stereo installation above can be helpful you. If you have any question, it’s suggested you turn to your dealer for help. If you don’t have any experience on the installation, you’d better have it installed by a professional. Besides, you need to confirm your new stereo can be suitable for your car. To check the compatibility, you are welcome to click the link below which is about an all-in-one 2005 2006 2007 Jeep Grand Cherokee(W/Factory NAV) car stereo from Seicane.

http://www.seicane.com/aftermarket-radio-gps-dvd-player-for-2002-2007-jeep-grand-cherokee-liberty-patriot-wrangler-with-bluetooth-music-tv-ipod-iphone-usb-sd-mp3-aux-rearview-camera-t6015

This amazing Jeep Grand Cherokee(W/Factory NAV) car stereo is equipped with a worldwide GPS navigation system, so you can go anywhere with ease with the guidance of route planning, turn-by-turn direction and voice prompts. Its 5 inch HD multi-touch screen is desirable to offer easy operation as well as a clear display. Wish you like it and have a wonderful time with it!