How to upgrade a 2005-2012 BMW 3 Series E90 E91 E92 E93 car stereo with DVD Player GPS Navigation System Radio Bluetooth 1080P Video TV Tuner   

Posted on by — 3 Comments ↓ 13,875 views

Have you ever upgraded your factory radio before? If not, you will be greatly amazed at the different experience if you try to replace your factory radio with a new one. You may worry about the installation. Now I’d like to introduce a step-by-step 2005-2012 BMW 3 Series E90 E91 E92 E93 car stereo installation guide from Seicane to you as a reference.

2005-2012 BMW 3 Series E90 E91 E92 E93 car stereo after installation
2005-2012 BMW 3 Series E90 E91 E92 E93 car stereo after installation

 

Tips about the installation:

 

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

 

 

2005-2012 BMW 3 Series E90 E91 E92 E93 car stereo installation guide

  1. The original dashboard before installation.

    1. The original dashboard before installation.
    1. The original dashboard before installation.

 

  1. Pry the panel off with a lever. You need to lift the air-conditioning assembly and don’t pry the air-conditioning panel off directly.

    2. Pry the panel off with a lever. You need to lift the air-conditioning assembly and don't pry the air-conditioning panel off directly.
    2. Pry the panel off with a lever. You need to lift the air-conditioning assembly and don’t pry the air-conditioning panel off directly.

 

3.Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out.

  • 3-1.Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out.
    3-1.Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out.

    3-2.Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out.
    3-2.Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out.

 

  1. Disconnect the power plug behind the CD player and the plug of the radio aerials.
    4-1. Disconnect the power plug behind the CD player and the plug of the radio aerials.
    4-1. Disconnect the power plug behind the CD player and the plug of the radio aerials.

    4-2. Disconnect the power plug behind the CD player and the plug of the radio aerials.
    4-2. Disconnect the power plug behind the CD player and the plug of the radio aerials.

 

  1. Take off the plastic bracket frame behind the CD Player. Six screws are shown in the picture as follow. 4 of them are T20 screws, 2 of them are turnbuckles(no.8).

    5. Take off the plastic bracket frame behind the CD Player. Six screws are shown in the picture as follow. 4 of them are T20 screws, 2 of them are turnbuckles(no.8).
    5. Take off the plastic bracket frame behind the CD Player. Six screws are shown in the picture as follow. 4 of them are T20 screws, 2 of them are turnbuckles(no.8).

 

  1. Unscrew the 2 turnbuckles(no.8).After the removal, the bracket is not needed, because the DVD comes with its metal bracket panel.

    6. Unscrew the 2 turnbuckles(no.8).After the removal, the bracket is not needed, because the DVD comes with its metal bracket panel.
    6. Unscrew the 2 turnbuckles(no.8).After the removal, the bracket is not needed, because the DVD comes with its metal bracket panel.

 

7.Mount the metal bracket panel of DVD to the position where the factory CD bracket panel is dismounted.          Screw the 4T20 screws on.

  • 7-1.Mount the metal bracket panel of DVD to the position where the factory CD bracket panel is dismounted. Screw the 4T20 screws on.
    7-1.Mount the metal bracket panel of DVD to the position where the factory CD bracket panel is dismounted. Screw the 4T20 screws on.

    7-2.Mount the metal bracket panel of DVD to the position where the factory CD bracket panel is dismounted. Screw the 4T20 screws on.
    7-2.Mount the metal bracket panel of DVD to the position where the factory CD bracket panel is dismounted. Screw the 4T20 screws on.

 

  1. Connect the power plugs of DVD player and the CD player. Then connect the wires to the new Seicane stereo as t he user manual or the wiring diagram shows.
    8-1. Connect the power plugs of DVD player and the CD player. Then connect the wires to the new Seicane radio as t he user manual or the wiring diagram shows.
    8-1. Connect the power plugs of DVD player and the CD player. Then connect the wires to the new Seicane radio as t he user manual or the wiring diagram shows.

    8-2. Connect the power plugs of DVD player and the CD player. Then connect the wires to the new Seicane radio as t he user manual or the wiring diagram shows.
    8-2. Connect the power plugs of DVD player and the CD player. Then connect the wires to the new Seicane radio as t he user manual or the wiring diagram shows.

 

9.Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10.Put the new Seicane stereo into the dash.

11.Put everything into their original place.

 

That’s all the installation method about a 2005-2012 BMW 3 Series E90 E91 E92 E93 car stereo. To make sure you have a successful upgrade, you need to be clear about every step before the installation. You also need to confirm that your new car stereo can be compatible with your car. If you don’t have one, then I’d like to introduce a great 2005-2012 BMW 3 Series E90 E91 E92 E93 car stereo from Seicane to you, please check out for more details:

 

http://www.seicane.com/2005-2012-bmw-3-series-e90-e91-e92-e93-oem-dvd-player-gps-navigation-system-radio-bluetooth-1080p-video-tv-tuner-dvr-usb-sd-canbus-3g-wifi-rearview-camera-s127109d

 

With an advanced WINCE 6.0 CORE operation system, this BMW 3 Series E90 E91 E92 E93 car stereo comes with a variety of useful and amusing and features for you to get the convenience and enjoyment on the way, such as the 3D GPS navigation system of high precision, bluetooth technology, DVD player, FM/AM radio, Ipod, Wifi, USB, SD, etc. What’s more, your steering wheel control can still work after installation. To have a brand new experience, it’s just your best choice!

Detailed installation instruction for a 1998-2002 Mercedes Benz A W168 head unit with DVD Player 1080P Video USB SD TV Tuner

Posted on by — No Comments ↓ 2,549 views
1998-2002 Mercedes Benz A W168 head unit after installation

Some car owners have the prejudice that to install a new car radio is a job which is only mastered by professionals. In fact, more and more car owners have successfully installed their new radios on their own. Of course, they need to do it under the guidance of a correct installation guide. Here I’d like to introduce a detailed 1998-2002 Mercedes Benz A W168 head unit installation guide from Seicane to you. If you have the same dashboard as the following picture, the you can also follow it to help with your installation.

1998-2002 Mercedes Benz A W168 head unit after installation
1998-2002 Mercedes Benz A W168 head unit after installation

 

Some tips before the installation:

  1. Please disconnect the power before the installation.
  2. Please prepare a lever and a screwdriver before the removal and the installation.
  3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

1998-2002 Mercedes Benz A W168 head unit installation guide

1. The picture of the original CD player and 6-disc CD player.

1. The picture of the original CD player and 6-disc CD player
1. The picture of the original CD player and 6-disc CD player

2. First detach the gear shift panel.

2. First detach the gear shift panel.
2. First detach the gear shift panel.

3. Use a screw driver to remove the screw marked with a red circle to release the car charger and ashtray.

3. Use a screw driver to remove the screw marked with a red circle to release the car charger and ashtray.
3. Use a screw driver to remove the screw marked with a red circle to release the car charger and ashtray.

4. Remove the car charger and ashtray assembly.

4. Remove the car charger and ashtray assembly.
4. Remove the car charger and ashtray assembly.

5. Use a screw driver to remove the screw marked with a red circle.

5. Use a screw driver to remove the screw marked with a red circle.
5. Use a screw driver to remove the screw marked with a red circle.

6. Pry the air conditioner panel out with a plastic lever.

6. Pry the air conditioner panel out with a plastic lever.
6. Pry the air conditioner panel out with a plastic lever.

7. Remove the original air conditioner panel.

7. Remove the original air conditioner panel.
7. Remove the original air conditioner panel.

8. Remove the heated seat and control panel assembly.

8. Remove the heated seat and control panel assembly.
8. Remove the heated seat and control panel assembly.

9. Pay attention to this buckle.

9. Pay attention to this buckle.
9. Pay attention to this buckle.

10. Remove two screws.

10. Remove two screws.
10. Remove two screws.

11. Pull out the original CD player.

11. Pull out the original CD player.
11. Pull out the original CD player.

12. Please be careful not to stretch the wiring harness behind the assembly.

12. Please be careful not to stretch the wiring harness behind the assembly.
12. Please be careful not to stretch the wiring harness behind the assembly.

13. The wiring diagram as follows. Put the plug of the car in the socket of the unit.

13. The wiring diagram as follows. Put the plug of the car in the socket of the unit.
13. The wiring diagram as follows. Put the plug of the car in the socket of the unit.

14. The wiring diagram.

14. The wiring diagram.
14. The wiring diagram.

15. The wiring diagram.

15. The wiring diagram.
15. The wiring diagram.

16. Radio antenna lead.

16. Radio antenna lead.
16. Radio antenna lead.

17. Install the new Seicane unit back after the wiring harness has bee connected. Fasten the four screws.

17. Install the new Seicane unit back after the wiring harness has bee connected. Fasten the four screws.
17. Install the new Seicane unit back after the wiring harness has bee connected. Fasten the four screws.

18. Install the air conditioner panel, the car charger, the ashtray, the heated seat and the control panel back.

18. Install the air conditioner panel, the car charger, the ashtray, the heated seat and the control panel back.
18. Install the air conditioner panel, the car charger, the ashtray, the heated seat and the control panel back.

19. Reinstall cigarette lighter.

19. Reinstall cigarette lighter.
19. Reinstall cigarette lighter.

20. Turn on the new Seicane unit and have a careful check if everything works well.

That’s all the installation guide for a 1998-2002 Mercedes Benz A W168 head unit. If you find your dashboard is a litter bit from that shown in the guide picture, please don’t worry, it won’t have much influence on the installation. If there is any question, you can consult your dealer or a professional.

Besides, you need to have a suitable car stereo for your car, so that it can be compatible with your car, and if you don’t have one, you can refer to this intelligent 1998-2002 Mercedes Benz A W168 head unit from Seicane, please click for more details:

https://www.seicane.com/android-gps-navigation-system-for-1998-2002-mercedes-benz-a-class-w168-with-radio-dvd-player-touch-screen-bluetooth-wifi-tv-ipod-hd-1080p-video-backup-camera-steering-wheel-control-usb-sd-s018802

 

This amazing Mercedes Benz A W168 head unit is integrated with a GPS navigation system and  a powerful DVD player for you to have fun all the way. You can get hands-free calling convenience and enjoy music streaming when you wirelessly pair with your mobile phone via the bluetooth technology. The turn-by-turn direction and voice prompts can be provided for you to find your way to any unfamiliar place.

How to easily install a 2004-2012 Mercedes Benz A class W169 car stereo with 1080P Video USB SD CANBUS TV Tuner DVR Bluetooth

Posted on by — 2 Comments ↓ 6,848 views

Here shows an advanced 2004-2012 Mercedes Benz A class W169 car stereo. It is an image after installing this Seicane Mercedes Benz A class W169 car stereo in the dashboard of the Mercedes Benz A class.

2004-2012 Mercedes Benz A Class W169 car stereo after installation
2004-2012 Mercedes Benz A Class W169 car stereo after installation

 

Some car owners have no idea about how to install an ideal stereo in their car. Actually, the installation is not too complicated. With some related experience and a correct installation guide, a new stereo can be easily installed within about half an hour. If you have a Mercedes Benz A class W169 and also have the same dashboard as above, then you can refer to this installation guide to help with the installation.

 

 

Tips about the installation:

 

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

 

2004-2012 Mercedes Benz A Class W169 car stereo installation guide

 

  1. Detach the outer frame of the original CD player.

    1. Detach the outer frame of the original CD player
    1. Detach the outer frame of the original CD player
  1. Use a screw driver to remove the screws marked with red circles.

    2. Use a screw driver to remove the screws marked with red circles
    2. Use a screw driver to remove the screws marked with red circles
  2. Remove the screw on the lower right.

    3. Remove the screw on the lower right
    3. Remove the screw on the lower right
  3. Remove the screw on the lower left.

    4. Remove the screw on the lower left
    4. Remove the screw on the lower left
  1. Remove the screw on the upper left.

    5. Remove the screw on the upper left
    5. Remove the screw on the upper left
  2. Remove the screw on the upper right.

    6. Remove the screw on the upper right
    6. Remove the screw on the upper right
  3. Use a screw driver to remove the screws marked with red circles.

    7. Use a screw driver to remove the screws marked with red circles
    7. Use a screw driver to remove the screws marked with red circles
  4. Remove the original CD player.

    8. Remove the original CD player
    8. Remove the original CD player
  5. Insert the plug of the car into the socket of unit.

    9. Insert the plug of the car into the socket of unit
    9. Insert the plug of the car into the socket of unit
  6. Remarks:

    10. Remarks a. Plug in the radio antenna. b. Plug in the GPS antenna
    10. Remarks a. Plug in the radio antenna. b. Plug in the GPS antenna

a.Plug in the radio antenna.

b.Plug in the GPS antenna.

 

11.Install the new Seicane stereo into the dashboard.

  • 11. Install the new Seicane stereo into the dashboard
    11. Install the new Seicane stereo into the dashboard

12.Fasten the new Seicane stereo with 4 screws and install the frame back.

  • 12. Fasten the new Seicane stereo with 4 screws and install the frame back
    12. Fasten the new Seicane stereo with 4 screws and install the frame back

13.Turn on the new Seicane stereo to have a comprehensive check.

 

Now you probably have a general idea about how to install a new stereo in your car. If you have anything hard to understand, please don’ t hesitate to ask your dealer or a professional. If you don’t have any experience on the installation, please have your new stereo installed by a technician.

 

What’s more, you need to ensure your new stereo can be compatible with your car, so that it can be perfectly installed in your car. If you don’t know which stereo can fit your car, you can refer to this hot-selling 2004-2012 Mercedes Benz A class W169 car stereo from Seicane, please click:

 

http://www.seicane.com/car-dvd-player-gps-navigation-for-2004-2012-mercedes-benz-a-class-w169-a150-a170-support-radio-1080p-video-usb-sd-canbus-rearview-camera-tv-tuner-dvr-bluetooth-s127682d

 

This intelligent Mercedes Benz A class W169 car stereo comes with the latest GPS navigation system, you can go anywhere you’d like at the help of the turn-by-turn directions and voice prompts. The compatibility of bluetooth allows you to wirelessly link your enabled mobile phone with this unit for hands-free calls and streaming music. There is also a backup camera input for you to connect a rearview camera to help you park more easily.

 

Wish you like this amazing Mercedes Benz A class W169 car stereo and have a wonderful time with it! Good luck to you!

 

How to install a new 2012 2013 2014 Subaru Forester head unit with 3G WiFi GPS Navigation system USB SD Video 3G WiFi

Posted on by — No Comments ↓ 8,088 views

For car owners, to have a multifunctional car radio can bring lots of entertainment on all trips. And also enhance the quality of living life. However,you might have a confusion that how can i replace my car stereo with a new expected one. Here below i would like to share you a specific installation and removal guide for 2013 2014 Subaru XR Forester Impreza car stereo from Seicane.


Precautions:

  1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
  2. A lever and a screwdriver need to be prepared before the installation.

2013 2014 Subaru XR Forester Impreza car radio installation guide

 

  1. Take out of the glove.
  2. Unplug the plug which connect the trim panel to the dash.

  3. Pry the a/v vent panel with a lever.

  4. Off the vent panel out of the dash.

  5. Unplug all the connectors at the back of the vent panel.

  6. Remove four screws holding the factory radio.

  7. Gently take the factory radio out of the dashboard.

  8. Unplug the connectors at the back.


  9. Carefully make antennas and cables connected step by step as installation instructions show.
  10. Put the new Seicane unit into your dashboard, double check if allconnections are correct and you’d better have a tidy for the cables.
  11. Check whether the new Seicane unit is working well.
  12. If there is no problem, firm removed screws and bolts that are put aside, then make trim panel back on your new Seicane unit.

 

Wish the above installation guide for a 2013 2014 Subaru XR Forester Impreza GPS navigation is helpful. If there is any questions about the installation, please get help from a dealer or a professional. In addition, if you don’t have any suitable one, there is a recommended modern car radio for Subaru XR Forester Impreza head unit .Please check the link below for details.

http://www.seicane.com/9-inch-android-bluetooth-radio-for-2012-2013-2014-subaru-forester-with-3g-wifi-gps-navigation-system-tpms-dvr-obd-ii-rear-camera-aux-headrest-monitor-control-usb-sd-video-3g-wifi-capacitive-touch-screen-s081988

 

The Subaru XR Forester Impreza DVD Player with a large 9 inch 1024*600 multi-touch screen to facilitate,it is an ideal selection to upgrade your factory radio. The GPS function can direct you turn-by-turn and voice can avoid getting lost when you get to any unfamiliar location.You can also wirelessly sync your mobile phone using this unit to make and receive hands-free calls and stream music to have a journey filled with security and pleasure.

This 2013 2014  Subaru XR Forester Impreza Car GPS Navigation  comes with the latest Android Radio, RAM 2GB \ ROM 32GB \ Quad core , Support Carplay,RDS, SWC, XM radio APP etc. The steering wheel control still keep working after the installation of this excellent stereo.

How to simply install a new 2015-2018 Toyota Sienna head unit with Capacitive Touch Screen USB SD Bluetooth 3G WiFi Video AUX

Posted on by — No Comments ↓ 7,348 views

2015-2018 Toyota Sienna car stereo GPS navigation  installation and removal guide as below will show you how to correctly and quickly install a new radio instead of old one by yourself. Or you also can easily get support from a professional to fix it.

2015-2018 Toyota Sienna car GPS DVD Player after installation

Precautions:

  1. Pleasepark the car in safe area and remove the negative cable on the vehicle battery before the remova
  2. A lever and a screwdriver need to be prepared before the installation.
  • 2015-2018 Toyota Sienna car radio installation guide
  1. Use a lever to pry along the plastic panel and remove it.
  2. Offthe panel under the 50 shift and hang it on the panel.
  3. Remove the a/c control unitrefer to the picture
  4. Unplug the back connectorsof the a/c control unit.
  5. Remove the screws holding the radio in place.
  6. Take the factory radio out of the dashboard.
  7. Disconnect the connectors at the back of factory radio.
  8. Make antennas and cables connected step by step asinstructions show, and be very careful when you are doing the installation.
  9. Put the new Seicane unit into your dashboardand check whether your connections are correct, once it’s done, you’d better to have a tidy for the cables.
  10. Check if the new Seicane unit is working well.
  11. If there is no problem, place screws andthen put trim panel back on the new Seicane unit.

Wish 2015-2018 Toyota Sienna car DVD Player installation and removal guide above is helpful.Surely you can ask for help if you could not handle it. I’d like to recommend you an excellent 2015-2018 Toyota Sienna car stereo from Seicane if you have not got suitable one yet. Go ahead and check the link below to have look:

http://www.seicane.com/10-2-inch-aftermarket-android-radio-gps-navigation-system-for-2015-toyota-sienna-with-capacitive-touch-screen-tpms-dvr-obd-ii-headrest-monitor-control-usb-sd-bluetooth-3g-wifi-video-aux-rear-camera-s082705

 

This 2015-2018  Toyota Sienna Car GPS Navigation  comes with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP etc. You can still keep the steering wheel control working after the installation of this fantastic stereo.

How to upgrade a 2007-2015 Mitsubishi LANCER head unit with GPS Navigation system Radio Capacitive Touch Screen HD 1080P Bluetooth

Posted on by — No Comments ↓ 14,733 views

Today’s tutorial article is talking about the installation and removal of 2007-2015 Mitsubishi LANCER car stereo.If you just got your new 2007-2015 Mitsubishi LANCER DVD Player,this article will be much more helpful for you by coincidence. Please check and follow detailed instructions blow step by step.

2007-2015 Mitsubishi LANCER car stereo after installation
2007-2015 Mitsubishi LANCER car stereo after installation

 

Warning :

1.Please park your car well and unplug the negative power cable to avoid any danger before you start up any work,

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

 

2007-2015 Mitsubishi LANCER GPS navigation installation guide

1.Open glove compartment (1-1) and remove screw to side panel (1-2).

 

1-1

1-1

 

1-2

1-2

2.Remove side panel by pulling toward seat.


3.Remove screw to trim panel and then gently pull trim piece toward seat.


4.Remove trim by using the tool or hands once trim piece is loose.

5.Multiple clips across trim carefully.

6.Do not remove these three screws marked on picture.

7.Gently pry edges around stereo face with panel removal tool.

8.After removing stereo face, place in safe location.

9.Disconnect the connector at the back.

10.Remove these four screws as below.

11.Move original stereo out little bit for access to harnesses behind it.

12.Remove smaller connector to give access to Seicane harnesses.

13.Insert Seicane harness into open port of new unit(13-1), connect removed harness to Seicane harness(13-2)

 

13-1

13-1

 

13-2

13-2

14.20-pin harness connects to Seicane unit.

15.Separate and test wire for +12v constant.

16.After confirmation of +12v constant, make connection with provided P-Tap, please ensure P-Tap has punctured wire and is tightly secured.

17.Fasten top cap to connect Yellow power wire.

18.Insert stripped wire as far as possible.

19.Gently secure cap and tug on wire to make sure it is secured.

20.After making cables connection, turn on stereo and test new Seicane unit till everything works well.

Hope this article helps you a lot with the installation for 2007-2015 Mitsubishi LANCER car radio.If you still have problem about it, please feel free to contact a dealer or professional for support. Surely you can check the link below for more information:

https://www.seicane.com/2014-2015-mitsubishi-lancer-android-radio-dvd-player-gps-navigation-system-bluetooth-hd-1024-600-touch-screen-mirror-link-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-steering-wheel-control-ipod-usb-sd-s168065g

 

This Mitsubishi LANCER head unit comes with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP etc. The awesome stereo can simply pair with your Bluetooth-enabled cell phone to have hands-free calls and stream music so as to make your journey more safer and enjoyable. Besides, you can also connect a rear-view camera with it to help you park more easily.

How to replace the factory car radio with a new one in details for 2004-2012 Opel Zafira/Vectra/Antara/Astra/Corsa car stereo?

Posted on by — No Comments ↓ 13,976 views

How to replace the factory car radio with a new one in details for 2004-2012 Opel  Zafira/Vectra/Antara/Astra/Corsa car stereo?

Too high labour costs to hire people to fix tings,especially in Western countries. A good way to deal with this situation is to learn by ourselves.As a result, writers of many kinds have appeared to share articles with different topics. Here’s item is to guide drivers to upgrade the car radios.The picture below shows the car interior dash image after installing a car head unit product for 2004-2012 Opel Zafira/Vectra/Antara/Astra/Corsa DVD Player from Seicane. I would like to give an direct example to show your guys how to remove the original radio and install a new nice one instead of it.

Precautions:

1.Please disconnect the power before the installation.

2.A lever and a screwdriver need to be prepared before the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible, so each related part of the unit can be fixed securely.

 

2004-2012 Opel Zafira/Vectra/Antara/Astra/Corsa car radio installation guide

1.Loose the trim panel with a removal tool and take it out as picture show.

2.Disconnect the connector at the back of the radio.

3.Take out the screws and place wires in order.

4.Pry the trim panel with a lever, and then release and remove it.

5.Plug antennas as the pictures show below.

6.Use a screwdriver to pull out the side panel, then take out lower side panel.

7.Make red long line insert down and up through the inner area by following the marked 1，2, then sort cables and interfaces.

8.Connect the red cable to the right position and re-install the side panel back.

9.Make connection for cables and interfaces between the new Seicane radio and the car refer to the wiring diagram.

10.Check if everything is going well after new car radio installation. Please check whether the connections are correct or not.

 

If the new radio works well for your car after installation which mainly introduces the detailed removal and installation steps. for 2004-2012 Opel Zafira/Vectra/Antara/Astra/Corsa GPS Navigation , then this article is the one you need exactly . If you still have any confusion about it , you’d better ask a professional for help. If you don’t find an ideal radio for your car, I’d like to recommend a modern model for 2004-2012 Opel Zafira/Vectra/Antara/Astra/Corsa car Stereo to you, please click:

https://www.seicane.com/android-2006-2011-opel-corsa-in-dash-dvd-navigation-system-with-hd-touch-screen-bluetooth-music-am-fm-radio-auto-a-v-obd2-mirror-link-aux-3g-wifi-steering-wheel-control-hd-1080p-video-backup-camera-s6924g

Above car radio for 2004-2012 Opel Zafira/Vectra/Antara/Astra/Corsa car Radio comes with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Build-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP etc. It will make you get to your desired destination within the least time, you can turn on the GPS function to get the lane assist, intelligent route planning, turn-by-turn direction and voice prompts for help. You can also make and receive hands-free calls without taking your hands off the steering wheel control for security via bluetooth connection with your enabled cell phone. Wish you can have a great time with it on all your trips. Good luck!

 

How to upgrade a 2013 2014 2015 Honda CRV high version head unit with screen 3G WiFi Touch Screen AUX Bluetooth HD 1080P Video

Posted on by — No Comments ↓ 4,899 views
2013 2014 2015 Honda CRV high version head unit after installation

To drive your beloved car to get to your destination, you must feel much enjoyable. To get more fun, you can easily install a new aftermarket head unit which can offer a lot of entertainment options. If you are a car owner of a 2013 2014 2015 Honda CRV high version, you must be familiar with the image below, which is an all-in-one 2013 2014 2015 Honda CRV high version head unit from Seicane. If you plan to upgrade your factory radio, then you can refer to the installation guide as follows.

2013 2014 2015 Honda CRV high version head unit after installation
2013 2014 2015 Honda CRV high version head unit after installation

 

 

Some tips before the installation:

  1. Please disconnect the power before the installation.
  2. Please prepare a lever and a screwdriver before the removal and the installation.
  3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

 

 

2013 2014 2015 Honda CRV high version head unit installation guide

1.Pry the below left control button with a screwdriver and then pry the right one.

2013 2014 2015 Honda CRV high version head unit installation step 1
2013 2014 2015 Honda CRV high version head unit installation step 1

 

2.Softly take out the panel.

2013 2014 2015 Honda CRV high version head unit installation step 2
2013 2014 2015 Honda CRV high version head unit installation step 2

 

3.Use a screwdriver remove two screws which lay in left and right sides of the top panel,and keep screws well for use again.

2013 2014 2015 Honda CRV high version head unit installation step 3
2013 2014 2015 Honda CRV high version head unit installation step 3

 

4.Prize the front of dashboard with a lever, after it was fastened remove it.

2013 2014 2015 Honda CRV high version head unit installation step 4
2013 2014 2015 Honda CRV high version head unit installation step 4

 

5.Remove this upper dashboard gently, you may still use screwdriver to help you.

2013 2014 2015 Honda CRV high version head unit installation step 5
2013 2014 2015 Honda CRV high version head unit installation step 5

 

6.Take out two screws which lay in left and right sides of downward place.

2013 2014 2015 Honda CRV high version head unit installation step 6
2013 2014 2015 Honda CRV high version head unit installation step 6

 

7.After these work,you can gently get the CD player out.

2013 2014 2015 Honda CRV high version head unit installation step 7
2013 2014 2015 Honda CRV high version head unit installation step 7

 

8.Plug all the cables which connected them.

2013 2014 2015 Honda CRV high version head unit installation step 8
2013 2014 2015 Honda CRV high version head unit installation step 8

 

9.Plug cables of the new Seicane head unit to car wires and firm the four screws to their original places.

  1. Check whether the new Seicane head unit is working without problem.

 

That’s all the installation guide for a 2013 2014 2015 Honda CRV high version head unit. If you have any questions, please seek help from your dealer or a professional. However, without any experience on the installation, it’s strongly suggested you have it installed by a professional. If you don’t have an ideal unit for your car, you can refer to this multifunctional 2013 2014 2015 Honda CRV high version head unit from Seicane, please click:

 

http://www.seicane.com/10-2-inch-2013-2014-2015-honda-crv-high-version-with-screen-android-radio-gps-navigation-system-3g-wifi-capacitive-touch-screen-tpms-dvr-obd-ii-rear-camera-aux-steering-wheel-control-usb-sd-bluetooth-hd-1080p-video-s083697

 

This Seicane Honda CRV high version head unit comes with the latest  GPS navigation system for you to upgrade your car radio. With the turn-by-turn direction and voice prompts, you can travel to anywhere you’d like or find a coffee shop easily. To keep safer and more relaxed during the whole journey, you can simply link with your bluetooth-enabled mobile phone to make hands-free calls and stream music.

 

Just find your way to your desired destination with this up-to-date Seicane Honda CRV high version head unit. Good luck!

 

10 easy steps to install a 2004-2011 Ford Focus MK2 head unit for MANUAL air condition with touch screen AUX 3G WiFi HD 1080P Video

Posted on by — No Comments ↓ 6,488 views

First shows you an intelligent 2004-2011 Ford Focus MK2 head unit from Seicane. It is equipped with a lot of advanced features for you to upgrade your factory radio.

2004-2011 Ford Focus MK2 head unit for manual air conditioner after installation
2004-2011 Ford Focus MK2 head unit for manual air conditioner after installation

 

Some of car owners may worry that the installation is too difficult, so that they do not easily replace their factory radio to for new features. As a matter of fact, it’s not too difficult to install a new head unit. With some related installation experience, you can easily finish the installation under the help of a correct installation guide. If you also have the same dashboard as the picture above, you can refer to the following instructions.

 

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

 

2004-2011 Ford Focus MK2 head unit installation

1·Remove the original console panel with a plastic knife, pry gently along the gap and pick up the panel. Then set it aside.

2004-2011 Ford Focus MK2 head unit installation step 1
2004-2011 Ford Focus MK2 head unit installation step 1

 

2·Remove the four screws that fixed the radio on the dashboard. Remove these screws will not be a difficult job.

2004-2011 Ford Focus MK2 head unit installation step 2
2004-2011 Ford Focus MK2 head unit installation step 2

 

3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

2004-2011 Ford Focus MK2 head unit installation step 3
2004-2011 Ford Focus MK2 head unit installation step 3

 

4·Unplug the connectors.

2004-2011 Ford Focus MK2 head unit installation step 4
2004-2011 Ford Focus MK2 head unit installation step 4

 

5·Remove the brackets on both sides of the factory radio. So far the removal of the factory radio is completed. Next steps will move to the installation of the Seicane head unit.

2004-2011 Ford Focus MK2 head unit installation step 5
2004-2011 Ford Focus MK2 head unit installation step 5

 

6·Install the brackets on both sides of the Seicane unit.

 

7·Dock the connectors of the original vehicle and the upgraded car audio.

2004-2011 Ford Focus MK2 head unit installation step 7
2004-2011 Ford Focus MK2 head unit installation step 7

 

8·Insert the wires to the appropriate location of the upgraded head unit. If you are not sure about how to wire correctly, you may refer to the wiring diagram for details.

 

9·Fix the Seicane aftermarket unit with the four screws.

2004-2011 Ford Focus MK2 head unit installation step 9
2004-2011 Ford Focus MK2 head unit installation step 9

 

10·Firm the console panel. Finally the new Seicane unit is installed and a comprehensive test should be conducted on the new radio.

2004-2011 Ford Focus MK2 head unit installation step 10
2004-2011 Ford Focus MK2 head unit installation step 10

 

That’s all the installation guide for a Ford Focus MK2 head unit. If there is any question, you can turn to your dealer or a professional for help. If you are a green hand on this, you can go to a car upgrade center to have it installed.

 

In addition, if you don’t have a correct head unit for your car, you need to find one which can fit your car very well. Here I’d like to recommend a great Ford Focus MK2 head unit from Seicane to you as a reference, please click:

 

http://www.seicane.com/10-2-inch-oem-android-radio-2004-2011-ford-focus-mk2-manual-air-condition-gps-navigation-system-bluetooth-capacitive-touch-screen-tpms-dvr-obd-ii-rear-camera-aux-3g-wifi-hd-1080p-video-headrest-monitor-control-usb-sd-s085690

 

This Ford Focus MK2 head unit comes with the latest 3D GPS navigation system can provide lane assist, 3D street view, landmark display, route planning, turn-by-turn direction and voice prompts for you to arrive at your destination with ease. You can play DVDs, CDs, VCD, FM/AM radio to keep relaxed all the way. For more flexible entertainment choices, you can utilize the USB or SD card connection to link with portable devices. Besides, hands-free calls and bluetooth music can also be available via bluetooth technology.

 

Wish you like this top Ford Focus MK2 head unit and have a wonderful time with it! Just take it and go right now!

 

How to replace a 2006-2019 Chevy Chevrolet Aveo/Lova/Captiva/Epica/RAVON Nexia R3/Gentra car GPS navigation

Posted on by — No Comments ↓ 2,062 views

How excited it is when you get a almost 100 percent perfect car radio product not only at a good price but also with expected foundations you exactly require.Meanwhile the installation would be the big challenge if you have no any experience related. If your car matches any among 2006-2019 Chevy Chevrolet Aveo/Lova/Captiva/Epica/RAVON Nexia R3/Gentra car stereo. The following article is just for you which can lead you to remove and install properly. Go ahead and check steps once you’re ready.

Tips :

  1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
  2. A lever and a screwdriver need to be prepared before the installation.

 

2006-2019 Chevy Chevrolet Aveo/Lova/Captiva/Epica/RAVON Nexia R3/Gentra GPS Navigation removal and installation Guide

  1. Please off the trim from the dashboard with a removal tool as marked.
  2. Take off the screws with a screwdriver.
    2007-2011 Daewoo Gentra head unit installation step 2
  3. Gently take out the head unit as picture shows.
    2007-2011 Daewoo Gentra head unit installation step 3
  4. Disconnect the connectors behind the factory unit.
    2007-2011 Daewoo Gentra head unit installation step 4
  5. Install the new Seicane product refer to the instructions and also follow the wiring diagram to make the antennas and connectors be connected correctly.
    2007-2011 Daewoo Gentra head unit installation step 5
  6. Put back the trim to the dash. Carefully check the new stereo if everything is working well.
    Please ask the dealer or professional for support.

 

That’s all the step-by-step installation guide for a 2006-2019 Chevy Chevrolet Aveo/Lova/Captiva/Epica/RAVON Nexia R3/Gentra car radio . Wish you can get some help from it. If you have any question, you can turn to your dealer or a professional for help. Besides, it’s essential for you to make sure you have a suitable head unit for your car, so that it can be seamlessly installed in your car. If you don’t have one, a recommended car radio for 2006-2019 chevy Chevrolet Aveo/Lova/Captiva/Epica/RAVON Nexia R3/Gentra from Seicane,  please click:

https://www.seicane.com/android-gps-navigation-system-for-2006-2011-chevy-chevrolet-epica-captiva-with-1080p-capacitive-touch-screen-3g-wifi-tpms-dvr-obd2-rear-camera-aux-steering-wheel-control-usb-bluetooth-mirror-link-s087693f

This 2006-2019 Chevy Chevrolet Aveo/Lova/Captiva/Epica/RAVON Nexia R3/Gentra DVD Player comes with come with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP ,etc. The GPS navigation system can provide voice prompts for you to help you avoid the traffic congestion, so that you can easily get to your destination. Certainly you will have a wonderful & safe driving experience and also various ways to get entertainments with above multifunctional car head unit.