Upgrade 2006-2011 Honda CRV car GPS Navigation System installation and removal.

Posted on by — 7 Comments ↓ 38,406 views

The direct target of this following article is to make you understand clearly about 2006-2011 Honda CRV Car GPS Navigation System installation and removal.If your car matches the car brand type so that you can refer to steps to upgrade the car head unit.As a result, advanced car radio will make your driving more joyful and safe because of the various and multifunctional performances.

Precautions:

1.Please park your car well and unplug the negative power cable to avoid any danger before start up any work.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional man.

 

2006-2011 Honda CRV car Radio Navigation System installation and removal

1·Pry out the speed control with a pry tool and Pull out the speed control gently, and set it side.

2·Unscrew two 10mm bolts under the radio,Off the trim panel with removal tool.

 

3· pull out the panel and then put it on the top and unscrew two 10mm bolts on the radio.

 

4·Pull out the radio and Disconnect the harnesses behind the radio.

5·Remove the screws that secure the hazard warning switch to the radio, then remove the switch.

6.Install the hazard warining switch and firm the screws.

7·Make antennas and cables connected step by step as installation instructions show carefully.

8·Connect the new Seicane Honda CRV head unit to your dashboard, you should check your connections, the new unit’s position.

9·Check whether the unit is working without problem.

10·When the radio is working properly, push the radio into place, firm four removed bolts that are put aside, then make panel back on your new unit.

 

Hope you have no doubt with the installation and removal for 2006-2011 Honda CRV car stereo. If you still have something confused, please feel free to contact a dealer or professional for support. Surely you can check the link below for more information:

https://www.seicane.com/2-din-radio-android-gps-dvd-player-for-2006-2007-2008-2011-honda-crv-navigation-system-support-usb-sd-bluetooth-3g-wifi-aux-rearview-camera-mirror-link-obd2-dvr-s32789f

This 2006-2015 Honda CRV Car DVD Player comes with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP,support Split Screen Display etc. It replaces your factory radio with android based system of great utility and extendability. And your original factory steering wheel controls will work properly. With this car radio you will offer you a various ways to have a wonderful time during the driving and make your trips safer.

 

Some questions you may concern about finding a fitting unit

Posted on by — No Comments ↓ 2,635 views

To find a right headunit for your car to upgrade the navigation system or DVD radio, some questions may concern you.Please refer to the following as a reference.

1.Which unit would fit my car best? Or would this unit fit my car? Or how would I know if this unit can fit my car?

First of all, you must know the year and model of your car. Please enter the year and model as the key words in the searching box on our website. Related searches will occur, then please go ahead to click them. If there are several searching results,please check them one by one. The product webpage will give you detailed information as a reference to know more about the unit and you can pick a favorite and fitting one.

To make sure if one unit can fit your car,you’d better compare your dashboard with the original radio pictures listed on the product webpage.If your dashboard picture is similar to the original radio picture listed in the unit’s product description page,then that unit will fit your car.

If you are still uncertain about this,please send us dashboard photo of your car at [email protected], and then we can check whether it will fit your car.
2. Are there some installation instructions?

Yes, we have installation instructions for some units,please contact us to make confirmation if you need. You can chat with us online or send email to [email protected].

For the units without installation instructions, we are very sorry for that and please arrange a professional to install it.
If you have any questions about installation,please send us photos about your original car’s plugs.Maybe we can make a wiring diagram for your car.

Does your car have optic fiber? If your car have optic fiber,then we can send you one wiring diagram.

And this is a link about installation,hope it can help you: http://www.seicane.com/mercedes-benz-e-class-w211-2002-2008-car-stereo-head-unit-upgrade-buying-guide-installation/#tab3
3. My car has optic fiber amplifier,will it still work if I install your unit?

If your car is Benz ML/GL/R CLASS W164 W251 or Prosche Cayenne /911(2005-2011),we have the optic fiber decoder as an option, you can order one to make your optic fiber amplifier work with our unit.

If you have other car and your car has optic fiber amplifier, you will need to run a 6 meter long cable to bypass your original car’s optic fiber amplifier during the installation.

The 6 meter long cable is for cars with optic fiber amplifer.The role of it is to transmit sound from our unit to your original car’s four speakers.If your car has optic fiber amplifier, then you need to connect this cable. And your original car’s optic fiber amplifier will not work after installation.

Even though your car’s optic fiber amplifier does not work, the sound quality of the unit is still very good. It has built-in amplifier and this amplifier can drive four speakers of your original car (FL, FR, RL, RR).If you need all the speakers work, you can add an amplifier. This way of installation is relatively complicated and not totally plug-and-play.

If you need to check if your car has optic fiber amplifier, you may need to remove your oriignal car’s radio andsend us pictures of the plugs. You can also consult at the place where you’ve bought the car.
4. My car has GPS function, can it work with your unit?

Some units don’t fit to cars with navigation at present. If your car comes with GPS function, you can send email to us at [email protected] to confirm whether that unit can work with your GPS function. If not, we can help to find a right unit to work with your GPS.
5. Does your unit support satellite radio?

Our radios do not come with an internal satellite radio tuner. This means that in order to listen to satellite radio, you need to either use an external satellite tuner and plug into the AUX cables in the rear of the radio, or use the bluetooth streaming feature from a smartphone using the free Sirius/XM app.
6. What is the warranty?

We have one year warranty for our units. All of our products are covered by a 12-month warranty, for replace and repair.
7. Can you offer a better price?
Sorry, this is the best price we can provide but we can send an SD card to you as a gift.
8. Is the shopping cost free? If not, how much is it?

Sorry, you have to pay for the shipping cost but we can send an SD card to you as a gift.
Please add this unit to cart, and choose the country you want to ship to, shipping fees will be estimated by our system automatically.
9. What kind of payment you can accept?

We do currently accept international PayPal,Western Union,Credit card,bank transfer.
10. How to pay with a credit card?

Please add this unit to cart and go to payment page. Please select the payment method paypal. Go on and select “Pay with a debit or credit card”, and then pay via your credit card. Thank you for shopping with us. The address in your paypal should be the same with you shipping address.
11.How long can I get the unit?

Generally speaking, we need about 3 days to process your order,and then it takes about 3-5 days to reach your door after shipping.

May the above can be helpful for you to select a fitting unit, if you have further questions, please feel free to contact us via online chat or send email to [email protected]. We are always trying our best to provide you with the best service. Hopefully you can have a nice shopping experience with us!Thank you!

How to remove and install a 2009-2012 Mazda 3 Radio DVD player navigation system

Posted on by — No Comments ↓ 12,004 views

The Mazda 3 proves that economical, fuel-efficient cars need not be dull to look at or to drive. I think that Mazda 3 is a good choice for most of us. But the original Mazda 3 Radio has only a few functions, if you want to use DVD player of navigation system. You need to remove the original radio and install a new aftermarket radio for your Mazda 3. Some of you might have no idea how to remove an install it. Don’t worry, I’d like to share my experience of remove an install the radio of Mazda 3.

 

This is a original radio of Mazda 3. Do you have the same radio in your car? If you say yes, you can follow the instructions below.

2009-2012 Mazda 3 dashboard
2009-2012 Mazda 3 dashboard

2009-2012 Mazda 3 Radio removal

1·Start your removal by removing the negative cable from the battery. Then return to the inside of the Mazda 3.

2·Next pry the vent panel and pull it out with medium force slowly. Then set it aside.

2009-2012 Mazda 3 Radio removal step 1
2009-2012 Mazda 3 Radio removal step 1

3·Now use a Phillips-head screwdriver to remove both sides screws of the radio as the picture shows.

2009-2012 Mazda 3 Radio removal step 2
2009-2012 Mazda 3 Radio removal step 2

4·Then pull out the original radio slowly.

2009-2012 Mazda 3 Radio removal step 3
2009-2012 Mazda 3 Radio removal step 3

5·Disconnect the wiring behind the original radio.

2009-2012 Mazda 3 Radio removal step 4
2009-2012 Mazda 3 Radio removal step 4

By the way, if you are looking for aftermarket radio for your Mazda 3. I’d like to share a good one with you:

http://www.seicane.com/8-inch-android-autoradio-stereo-gps-navigation-system-for-2009-2012-mazda-3-with-dvd-player-bluetooth-mirror-link-hd-touch-screen-obd-dvr-rear-view-camera-tv-usb-sd-3g-wifi-ipod-s168003

 

If you don’t know which aftermarket radio is better, this unit can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 8 inch HD 1024*600 multi-touch screen.

You can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet, download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc. And it is your perfect road companion.

 

2009-2012 Mazda 3 Radio installation

1·Make antennas and cables connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.

2·Connect the new radio to your Mazda 3, you should check whether your connections are correct, the new unit is in right position, and you’d better have a tidy for the cables.

3·Check whether the unit is working without problem.

4·If everything is OK, firm removed screws that are put aside, then make trim panel back on your new unit.

 

The radio has been installed now, new Mazda 3 Radio is belong to you.

 

Upgrade your Mazda 3 Radio by yourself. Good luck to you!

Specific instructions to upgrade Nissan X-Trail Radio with 3G WiFi mirror link

Posted on by — 4 Comments ↓ 12,074 views

Dear friends,do you know how to upgrade Nissan X-Trail radio support 3G WiFi mirror link?

Nowadays, cars have become a normal family transportation in modern society, and Nissan X-Trail is also a very popular one. And what do you think of a car radio?The fact is that car radio should be a very necessary part to car except its driving part.Therefore more and more drivers are willing to replace their original radio with a new one.And before learning that ,let’s have a look at following picture: radio after installation for Nissan X-Trail.

Nissan X-Trail Radio after installation
Nissan X-Trail Radio after installation

Nissan X-Trail radio removal

1)Take out the decoration bar with pry tools, better to put some tapes on both panels

Nissan X-Trail radio removal step 1
Nissan X-Trail radio removal step 1

2)Take out the air-condition consoler

Nissan X-Trail radio removal step 2
Nissan X-Trail radio removal step 2

3)Remove the dash covers

Nissan X-Trail radio removal step 3
Nissan X-Trail radio removal step 3

4)Take out the screws fixed on the original Radio

Nissan X-Trail radio removal step 4
Nissan X-Trail radio removal step 4

5)Take out the original Radio

Nissan X-Trail radio removal step 5
Nissan X-Trail radio removal step 5

6)Disconnect the original harness

Nissan X-Trail radio removal step 6
Nissan X-Trail radio removal step 6

Nissan X-Trail radio installation

1)Connect the original harness with new aftermarket radio cable adapter

2)Lay the GPS antenna cable into a pillar

3)Remove the holder kits from the original radio

4)Fix the holder kits on new aftermarket radio with screws

5)Connect the original harness with cable adapter cable, connect the GPS antenna and radio antenna adapter

6)Fix new unit into the dash with screws

7)Put the dash cover back

8)Put the air-condition consoler back

9)Put the decoration bar back to the place

 

Some Safety notes:

  1. Before connecting, please make sure the ignition is off to avoid short circuit.
  2. Ensure connect the yellow and red power cable at last.
  3. Ensure that all loose wires are isolated with electrical tape
  4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
  5. Ensure that all ground is connected to the same place.
  6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

 

So what, do you have a good aftermarket radio for your Nissan X-Trail? If you don’t know which unit is better, I’d like to share a good aftermarket Nissan X-Trail Radio with you:

http://www.seicane.com/seicane-s128007-8-inch-android-4-4-4-gps-radio-bluetooth-multimedia-navigation-system-for-nissan-x-trail-with-cd-dvd-player-3g-wifi-mirror-link-touch-screen-obd2-steering-wheel-control-auto-a-v-usb-sd-quad-core-cpu-16g-flash-s128007

 

This unit has many great functions such as High Speed 3G&WiFi Internet, App download, 3D Navigation, Radio Tuner, Bluetooth, IPod/IPhone Charging and so on. You can enjoy your car life with this new aftermarket radio.

 

Wish this essay can benefit you, you can upgrade your original radio in spare time. So, do it yourself with us. Then have fun with Nissan X-Trail Radio.

10 steps to install 2013 aftermarket Toyota RAV4 Radio

Posted on by — No Comments ↓ 9,042 views

The Toyota RAV4 has been loved by many fans of it, some of you might be owners of it. If you love your Toyota RAV4. And in order to enjoy your car life with Toyota RAV4, you must want to install a great aftermarket radio instead of the factory one. But you still haven’t do this for some reason. You might have no idea how to install it, or you might have no time to do it yourself. Today, I will share instructions of 10 steps to install 2013 aftermarket Toyota RAV4 Radio with you.

 

This image is the Toyota RAV4 Radio after installation. Do you think it’s wonderful? And can not wait to install it on your Toyota RAV4.

2013 Toyota RAV4 after installation
2013 Toyota RAV4 after installation

2013 Toyota RAV4 radio installation

1. Begin your installation by removing the negative cable from the battery.

2013 Toyota RAV4 radio installation step 1
2013 Toyota RAV4 radio installation step 1

2. Using an automotive trim tool,remove the upper dashboard trim panel. Set the panel aside once removed.

2013 Toyota RAV4 radio installation step 2
2013 Toyota RAV4 radio installation step 2

3. Next, gently pry the air conditioning vents on the left and right-hand sides of the factory touch screen unit away from the dashboard.

2013 Toyota RAV4 radio installation step 3
2013 Toyota RAV4 radio installation step 3

4. Gently pry the clock display and hazard lamp panel away from the dashboard and set it to the side.

2013 Toyota RAV4 radio installation step 4
2013 Toyota RAV4 radio installation step 4

5. Remove the four retaining screws attaching the factory touch screen unit to the dashboard.

2013 Toyota RAV4 radio installation step 5
2013 Toyota RAV4 radio installation step 5

6. Gently lift the touch screen unit away from the dashboard and lean it forward to gain access to the wiring harnesses on the reverse side.

2013 Toyota RAV4 radio installation step 6
2013 Toyota RAV4 radio installation step 6

7. Disconnect the touch screen by unplugging the individual harnesses.

2013 Toyota RAV4 radio installation step 7
2013 Toyota RAV4 radio installation step 7

8. Connect the wiring with new radio and put it into your Toyota RAV4.

9. Tighten the four screws.

10. Install the others panel.

During installation, you should notice:

  1. Before connecting, please make sure the ignition is off to avoid short circuit.
  2. Ensure connect the yellow and red power cable at last.
  3. Ensure that all loose wires are isolated with electrical tape
  4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
  5. Ensure that all ground is connected to the same place.
  6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

 

If you don’t have a new aftermarket Toyota RAV4 Radio yet. I’d like to share a good one with you:

http://www.seicane.com/seicane-s121063-quad-core-2013-toyota-rav4-android-4-4-4-gps-sat-nav-in-car-dvd-system-with-touch-screen-3g-wifi-am-fm-radio-bluetooth-music-usb-sd-1080p-video-mirror-link-obd2-backup-camera-dvr-steering-wheel-control-s121063

 

This unit has intelligent pure android 4.4.4 operation system and high quality RK3188 1.6 GHz Cortex A9 Quad-core processor with great performance. The biggest highlight is the 10.1 inch HD 1024*600 multi-touch screen with smooth operation.

It also has great functions such as High Speed 3G&WiFi Internet, App download, 3D Navigation, Radio Tuner, Bluetooth and so on.

 

Wish this essay can beneifit you when you have spare time to install your Toyota RAV4 Radio. So what? Enjoy your life with your Toyota RAV4 every day.

How to remove and install 2009-2015 BMW Mini Cooper Radio with aftermarket Andriod car stereo

Posted on by — 28 Comments ↓ 57,735 views

As we all know, BMW Mini Cooper is more and more popular now. If you’re a Mini Cooper owner, you can have your BMW Mini Cooper radio installation by yourself, even if you have no previous experience. Some of you may have no idea about how to remove and install the radio of Mini Cooper. But you want to have a new aftermarket radio with more functions and enjoy your car life with Mini Cooper. Don’t worry, believe yourself. I’d like to share specific instructions of 2009-2015 BMW Mini Cooper radio installation with you. Look at this image, this is Mini Cooper radio  after installation. Isn’t it very smart?

2009-2015 BMW Mini Cooper radio after installation
2009-2015 BMW Mini Cooper radio after installation

2009-2015 BMW Mini Cooper radio removal

1)Pry downward on the top edge of the driver’s-side knee panel with a panel tool, on both sides of the steering wheel. Let the panel hang down when the top is loose

BMW Mini Cooper radio removal step 1
BMW Mini Cooper radio removal step 1

2) Remove two screws from the panel on the left side of the radio with a screwdriver. Open the glove box and remove two screws from the panel on the right side of the radio

BMW Mini Cooper radio removal step 2
BMW Mini Cooper radio removal step 2

3)Pull out the panel on the radio

BMW Mini Cooper radio removal step 3
BMW Mini Cooper radio removal step 3

4) Remove the screws around the dashboard

BMW Mini Cooper radio removal step 4
BMW Mini Cooper radio removal step 4

5)Pull out the dashboard and disconnect the wiring

BMW Mini Cooper radio removal step 5
BMW Mini Cooper radio removal step 5

6) Remove the screws around the radio

BMW Mini Cooper radio removal step 6
BMW Mini Cooper radio removal step 6

7) Take out the radio and disconnect the wiring

BMW Mini Cooper radio removal step 7
BMW Mini Cooper radio removal step 7

The factory BMW Mini Cooper radio has been removed. And we can install a new aftermarket radio next.

Before installation, if you still don’t have a new aftermarket radio.I’d like to share a good one with you:

http://www.seicane.com/top-2011-2012-2013-2014-2015-bmw-mini-cooper-touch-screen-gps-radio-navigation-audio-system-tv-dvd-player-bluetooth-music-usb-sd-aux-backup-camera-steering-wheel-control-ipod-mp3-t7127

2009-2015 BMW Mini Cooper radio pre-installation

1)Ensure connect the yellow and red power cable at last.

2)Ensure that all loose wires are isolated with electricaltape

3)Ensure don’tangle the wire when tighten the moving parts(Such as seat rails).

4)Ensure that all GND is connected to the same place.

5)Using the improper fuse may cause damage of fire,so when replace the fuse,please consult the professional.

2009-2015 BMW Mini Cooper radio installation

1)Before connecting,please make sure the ignition is off to avoid short circuit.

2)Make antennas and cables connected step by step as installation instructions show,and you should be very careful when you are doing this for it will affect whole procedure.

3)Connected the new aftermarket radio to Mini Cooper,I’d like to advice you checking your connections are correct,the new unit is in right position,and you’d better have a tidy for the cables.

4)When everything is ok,you can turn on your new aftermarket radio.If it works with no problem,and then you can fix four screws on your new aftermarket radio.Finally put trim panel on the top of your new BMW Mini Cooper radio.

Everything have done, you can watch TV, play cd and DVD. You can use hands-free calls and music streaming by bluetooth. You can also use 3D navigation maps with voice cues, cursors, road planning and so on. Wish this essay can help you enjoy your car life with BMW Mini Cooper radio.

Instructions of 2013-2015 VW Santana radio removal and installation

Posted on by — No Comments ↓ 2,218 views

As we all know,Santana has a long history.Most of you must be the fans of VW Santana.But most of you might have no idea about VW Santana radio removal and installation.Though Santana is pretty good.In order to have better experience,remove your factory radio and install a new aftermarket radio is necessary.Today I will tell you how to remove the factory radio and install a new one on your VW Santana.

Look at this picture,is it familiar to you?Right,this is 2013-2015 VW Santana radio after installation.Do you think it’s wonderful?

VW Santana radio after installation
VW Santana radio after installation

Before factory radio removal and new radio installation,you should have a new aftermarket radio which is fit your VW Santana. If you have not bought the aftermarket radio.I’d like to share a good aftermarket radio with you.

http://www.seicane.com/8-inch-android-2013-2014-2015-vw-volkswagen-santana-radio-dvd-player-gps-navigation-system-with-mirror-link-hd-touch-screen-obd-dvr-canbus-bluetooth-usb-sd-rear-view-camera-tv-3g-wifi-ipod-s168007

This unit has 8 inch HD 1024*600 multi-touch screen with smooth operation, high sensitivity and abundant interaction for the better view of your road ahead.And High quality RK3188 1.6 GHz Cortex A9 Quad-core processor.The most attractive is it’s intelligent pure android 4.4.4 operation system with 1GB Samsung DDR3.

With a new suitable aftermarket radio.We can start remove factory radio of your VW Santana.

2013-2015 VW Santana radio removal

1)Remove the panel with plastic sled pry tool

2013-2015 VW Santana radio removal step 1
2013-2015 VW Santana radio removal step 1

2) Use a hex screwdriver to remove four captive screws of the factory radio

2013-2015 VW Santana radio removal step 2
2013-2015 VW Santana radio removal step 2

3) Pull out the factory radio

2013-2015 VW Santana radio removal step 3
2013-2015 VW Santana radio removal step 3

4) Unplug connectors

2013-2015 VW Santana radio removal step 4
2013-2015 VW Santana radio removal step 4

We finally removed the factory VW Santana radio.And next step is install a new aftermarket radio.

2013-2015 VW Santana radio installation

1)Make antennas and cables connected step by step as installation instructions show,and you should be very careful when you are doing this for it will affect whole procedure.

2)Connected the new aftermarket radio to VW Santana,I’d like to advice you checking your connections are correct,the new unit is in right position,and you’d better have a tidy for the cables.

3)When everything is OK,you can turn on your new aftermarket radio.If it works with no problem,and then you can fix four screws on your new aftermarket radio.Finally put trim panel on the surface of your new VW Santana radio.

 

This is the instructions of 2003-2015 VW Santana radio installation.Is it very easy?But I still have to give you some safety notes.

1)Before connecting,please make sure the ignition is off to avoid short circuit.

2)Ensure connect the yellow and red power cable at last.

3)Ensure that all loose wires are isolated with electricaltape

4)Ensure don’tangle the wire when tighten the moving parts(Such as seat rails).

5)Ensure that all GND is connected to the same place.

6)Using the improper fuse may cause damage of fire,so when replace the fuse,please consult the professional.

 

Wish you can learn something from this essay.Enjoy your car life with VW Santana radio.

How to remove and upgrade original car stereo autoradio for 2013 2014 2015 Ford F150 F250 F350 Expedition

Posted on by — No Comments ↓ 8,182 views

Look at this image,right! this is Car Stereo for 2013 2014 2015 Ford F150 F250 F350 Expedition.

Ford F150 car stereo after installation
Ford F150 car stereo after installation

A part of us may have seen this Ford F150 car stereo autoradio when we are shopping in the car market,you want to get it home but you don’t know how to use it in your Ford Expedition.Or maybe you don’t know how to remove and upgrade original car stereo autoradio first.Don’t worry,now I will tell you the convenience way of how to remove and upgrade original car stereo autoradio for Ford Expedition.

First of all,you should get a car stereo autoradioyou’re your Ford Expedition like Ford F150 car stereo:http://www.seicane.com/head-unit-car-stereo-sat-navi-multimedia-player-for-2013-ford-f150-with-gps-radio-dvd-bluetooth-3g-wifi-support-swc-3-zone-pop-c267

Then,we can start remove and upgrade original car stereo autoradio of your Ford Expedition.

Ford Expedition factory stereo removal steps:

1)Remove the rubber pad at the top of the radio trim panel then remove the screws exposed

Ford Expedition factory stereo removal step1
Ford Expedition factory stereo removal step1

2)Unclip and pull the side panels containing the a/c vents away from the radio trim panel.(Note:It is not necessary to remove the panels completely.)

Ford Expedition factory stereo removal step2
Ford Expedition factory stereo removal step2

3)Unclip and remove the radio trim panel

Ford Expedition factory stereo removal step3
Ford Expedition factory stereo removal step3

4)Unclip all molex plugs

Ford Expedition factory stereo removal step4
Ford Expedition factory stereo removal step4

5)Remove screws to remove the factory radio

Ford Expedition factory stereo removal step5
Ford Expedition factory stereo removal step5

6)Remove stereo and unplug connectors

Ford Expedition factory stereo removal step6
Ford Expedition factory stereo removal step6

Finally,we removed factory stereo.And next,we can install Ford F150 car stereo.It’s cool!Isn’t it？

Pre-installation notes for 2013 2014 2015 Ford F150 F250 F350 Expedition

1）This products use for the vehicle with 12V battery and negative end.Before the installation,check the battery voltage

2)Before connecting,please make sure the ignition is off to avoid short circuit.

3)Ensure connect the yellow and red power cable at last.

4)Ensure that all loose wires are isolated with electricaltape

5)Ensure don’tangle the wire when tighten the moving parts(Such as seat rails).

6)Ensure that all GND is connected to the same place.

7)Using the improper fuse may cause damage of fire,so when replace the fuse,please consult the professional.

The installation of instruction for 2013 2014 2015 Ford F150 F250 F350 Expedition

1)If the car is not equipped with car drives or navigation,please disconnect the car negative battery terminal.But when the car is equipped with car device or navigation,it will connect the car battery,in order

to avoid short-circuit,should ensure that the bare wires do not touch each other.

2)Demolition control area of the decorative panel.

3)According to the(rear seat wiring diagram)to check the cable connecting again.

4)Carefully view ICA opening tilt angle check the car,according to the tilt angle into the Central District will be the host,until you hear a “click”sound.(Picture-1):

Ford F150 car stereo installation
Ford F150 car stereo installation

5)Installed the decorative panel again(Without decorative panel,no need to perform this step).

6)Reconnect the car negative battery terminal.

Dear friends,do you understand how to remove and upgrade original 2013 2014 2015 Ford F150 car stereo autoradio?Hope you can learn something useful from it.

 

Specific installation steps for 2007 2008 2009 2010 Jeep Wrangler Unlimited DVD GPS navigation system

Posted on by — 2 Comments ↓ 2,724 views

Before telling about specific installation steps for 2007 2008 2009 2010 Jeep Wrangler Unlimited DVD GPS

 navigation system,I’d like to show you a video first,which can help you know better about new stereo for

Jeep series.

You may have a general idea about this unit after watching this video.It seems to be more convenient when

our car has a radio like this,but you may worry about a question that you have owned one and how can you

get this new one.

 

In fact you can upgrade your car’s audio system by removing factory cd radio and installing the suitable

Jeep Wrangler Unlimited navigation system.It’s not a thing that can be finished only be technical person,

but also can be a self-done thing if you are willing to patiently learn how to achieve it.

 

At first,you need to choose a right dvd for your car,and you can do it with the help of a professional

worker.Next job is learn how to replace factory stereo with a new one.If want to know details of the

head unit for Jeep series,I advice you to visit some websites,for example:http://www.seicane.com/

2007-2008-2009-2010-jeep-wrangler-unlimited-dvd-bluetooth-stereo-replacement-hd-touch-screen-

3d-navigation-radio-tuner-tv-pop-1080p-c202.After figuring out these questions,next let’s begin our

installation.

 

 2007-2010 Jeep Wrangler Unlimited stereo removal and installation:

1.Original dashboard of Jeep Wrangler Unlimited

Original dashboard of Jeep Wrangler Unlimited
Original dashboard of Jeep Wrangler Unlimited

 

 

 

 

 

 

 

2.Prize the trim panel to release it with the help of pry tool

Prize the trim panel to release it with the help of pry tool
Prize the trim panel to release it with the help of pry tool

 

 

 

 

 

 

 

3.Remove trim panel and disconnect antennas behind it

Remove trim panel and disconnect antennas behind it
Remove trim panel and disconnect antennas behind it

 

 

 

 

 

 

 

4.Remove 4 screws with a screw removal tool,two on each side

Remove 4 screws with a screw removal tool,two on each side
Remove 4 screws with a screw removal tool,two on each side

 

 

 

 

 

 

 

5.Gently take out factory stereo and disconnect cables back of it

Gently take out factory stereo and disconnect cables back of it
Gently take out factory stereo and disconnect cables back of it

 

 

 

 

 

 

 

 

These 6 steps shows specific steps on stereo removal,it’s not complex to do it if you are patient enough.

After a small rest,then we go on the installation for Jeep Wrangler Unlimited.

 

6.Make antennas and cables connected step by step as next pictures show,and you should be very careful

when you are doing this for it will affect whole procedure

Make antennas and cables connected
Make antennas and cables connected

 

 

 

 

 

 

 

Make antennas and cables connected
Make antennas and cables connected

 

 

 

 

 

 

 

Make antennas and cables connected
Make antennas and cables connect

 

 

 

 

 

 

 

7.After ensure your connection is right,install the new unit in right position,and you’d better have a tidy

for the cables before installation to make installation more easily

install the new unit in right position
install the new unit in right position

 

 

 

 

 

 

 

8.Turn on new stereo and check if your work is right.If it shows yes, then you can fix 4 screws beside

new radio and cover trim panel on the surface of car radio

The aftermarket car stereo DVD GPS nav system of 2007 2008 2009 2010 Jeep Wrangler Unlimited
The aftermarket car stereo DVD GPS nav system of 2007 2008 2009 2010 Jeep Wrangler Unlimited

 

 

Precautions after installation:

1.Please use a dried and clean cloth to wipe the touch screen,no other washing products or liquid to do it

2.Do not stare at your new machine especially when you are driving on a crowd road

3.When your car is driving on a abnormal day,for example a rainy day,you should pay more attention on

your head unit for moisture may gather on it;In addition

4.If you have used the aftermarket stereo for a long time and its temperature is over 70 degrees,you’d

better turn it off to protect your sound system

 

 

 

2011 2012 2013 Opel Astra Navigation DVD Bluetooth installation

Posted on by — No Comments ↓ 3,355 views

When you see next stereo which is specially for 2011 2012 2013 Opel Astra, you may feel confused for there

is some difference between this one and original one of car on appearance and functions.

 

Car head unit after installation,DVD GPS navigation system with bluetooth music of 2011 2012 2013 Opel Astra
Car head unit after installation,DVD GPS navigation system with bluetooth music of 2011 2012 2013 Opel Astra

 

Original car’s screen is only used for showing something,while this one’s screen is touch screen that you can

also operate on it with your hand or touch screen pen.

 

A lot of people have the idea to install a dvd gps for his Opel Astra to catch up with society trend and enjoy

themselves better during driving at the same time.And this is same to aim of this article,because you will see

detailed steps on 2011 2012 2013 Opel Astra Navigation DVD Bluetooth installation today.

 

Here is a video which will show you main features of the aftermarket stereo of Opel Astra.

 

 

Before you begin radio installation,you need to mind a series of things to make your work more smooth.

 

Precautions about installation:

1.Please remember to turn off your radio and other equipment,and make negative battery cable disconnected

to avoid unnecessary damage to people

2.In addition,when you are doing removal affairs,please place original CD player and removed screws in safe

places to ensure that you can find needed things after you have installed unit in at later time

 

Next we will talk about how to remove factory stereo and install Opel Astra Navigation system.It’s usual for you

to find some difference between your car radio appearance with the following one,don’t worry and you can take

it as reference because stereos for a series of cars are substantially uniform.

 

2011 2012 2013 Opel Astra radio removal:

1.Take out all things in this space

Take out all things in this space
Take out all things in this space

 

 

 

 

 

 

 

2.Lever its surface file panel and use a pry tool to remove it(you may remove it absolutely after next step)

Lever its surface file panel and use a pry tool to remove it
Lever its surface file panel and use a pry tool to remove it

 

 

 

 

 

 

 

3.Remove this screw and the other corresponding one

Remove this screw and the other corresponding one
Remove this screw and the other corresponding one

 

 

 

 

 

 

 

4.Loosen this side big trim panel and remove it

Loosen this side big trim panel and remove it
Loosen this side big trim panel and remove it

 

 

 

 

 

 

 

5.Open up two small panels and remove 4 screws under them

Open up two small panels and remove 4 screws under them
Open up two small panels and remove 4 screws under them

 

 

 

 

 

 

 

 

6.Take lower notch out and unplug cables at the back of it

Take lower notch out
Take lower notch out

 

 

 

 

 

 

 

 

unplug cables at the back of it
unplug cables at the back of it

 

 

 

 

 

 

 

7.Gently get out factory stereo and disconnect cables behind it,you can use a pry tool to remove some tight

ones

Gently get out factory stereo and disconnect cables behind it
Gently get out factory stereo and disconnect cables behind it

 

 

 

 

 

 

 

 

8.Pry upper control buttons’s edges around panel and remove it

Pry upper control buttons's edges around panel and remove it
Pry upper control buttons’s edges around panel and remove it

 

 

 

 

 

 

 

 

2011 2012 2013 Opel Astra gps navigation installation:

9.Install this panel on new unit,and same to lower control button

Install this panel on new unit
Install this panel on new unit

 

 

 

 

 

 

 

10.Make right cables connection,which is shown in following pictures:

Make right cables connection
Make right cables connection

 

 

 

 

 

 

 

Make right cables connection 2
Make right cables connection 2

 

 

 

 

 

 

 

Make right cables connection 3
Make right cables connection 3

 

 

 

 

 

 

 

Make right cables connection 4
Make right cables connection 4

 

 

 

 

 

 

 

11.After that,install new unit into the right place and reinstall other things back to car

reinstall the big trim panel and other panels to the car

 

 

 

 

 

 

 

When you have finished all these, turn on your new radio and check if it’s installed right and whether functions

can operate.If you want to know better about new radio,you’d better seek some information from the Internet,

for example: http://www.seicane.com/oem-aftermarket-car-radio-upgrade-sat-navi-system-for-opel-astra-with

-fm-am-3g-wifi-3-zone-pop-built-in-gps-dvd-bluetooth-ipod-rearview-c072.

 

Though this kind of installation is a little more complex than other ones on connecting cables,I have confidence that most of you will make it clear with the help of above 12 specific steps and clear images.