When it comes to the installation of a car radio, some of you may think it can only be achieved by professionals with expertise especially for those who have tried before but failed. In fact, to install a car radio doesn’t require much expertise. If you have correct installation guide and some related experience, you can also succeed in such a job. Of course, you should make clear every step of the installation before you start it. The following comes a 1998-2005 BMW E46 gps dvd Bluetooth stereo installation instruction for you as a reference.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
1998-2005 BMW E46 car radio installation instruction
1.The original car radio.
2.Remove the decoration strip, pry from the gap by using a flathead screwdriver.
3.Remove the two fixed screws from the original car radio.
4.Gently remove the original car radio.
5.Unplug the power speaker cable(by using a flathead screwdriver) and radio antenna.
6.Remove the air conditioning control panel. By putting two hands on the air conditioning control panel, and pull it out toward to your own direction.
7.Pull out the related wires.
8.Remove the air-conditioning vents. The vent is firmly fixed, press it by 2 thumbs and remove it when the vent come out.
9.Remove the final two screws from the frame, so as to take out the whole unit frame.
10. Take out the storage box inside, where to install with air conditioning control panel.
11. Check all the accessories for the new Seicane car radio.
12. Connect the harnesses to the back of the new Seicane car radio.
13. Connect the Seicane car radio to your original stereo’s plugs.
14. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
15. Put the new Seicane car radio into the dash.
16. Put everything into their original place. All the installation is done.
Is it easy enough for you to understand the above installation instruction for a 1998-2005 BMW E46 gps dvd Bluetooth stereo? Before you start your work, if you have any questions, you can consult your dealer for helpful advice. If you don’t have related experience before and still think it impossible for you to finish the installation, you’d better go to a car stereo upgrade centre to arrange a technician to install the new car radio for your car. To help you find a suitable car radio, I would like to recommend a 1998-2005 BMW E46 gps dvd Bluetooth stereo from Seicane to you. For more details, please click:
With this excellent 1998-2005 BMW E46 gps dvd Bluetooth stereo in your car, your driving experience will be taken up a notch in a large extent. The built-in 3D GPS navigation system enables you to go anywhere you’d like to through its text-to-speech. The large 8 inch HD 1024*600 multi-touch screen will bring you the best viewing effect when you turn on the DVD player to play movies or videos. The Bluetooth module allows you to make, receive or reject calls and enjoy streaming music without keeping your hands off the steering wheel. If you like it, don’t forget to add it to your cart. Good luck to you!
Recent Comments