With the rapid development of technology, people are becoming more and more productive, which means that the demand and popularity of portable and mobile solutions continue to increase. People like the ability to do what they want when they leave home. For example, when you are driving back home, you might want to install a GPS entertainment system in your car to end you dull trips. And how to install and upgrade it in a right way, the following is an installation instruction from Seicane for 2004 2005 2006 2007 2008 AUDI A4 Aftermarket Radio GPS Entertainment System. You can refer to it if you have a similar vehicle and you decide to replace it by yourself.
2004 2005 2006 2007 2008 AUDI A4 aftermarket radio GPS entertainment system after installation
Precaution for Installation:
1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2. Please make sure that all fastened wires are isolated with electrical tape.
3. Please make sure the ignition is off to avoid short circuit.
4. Please prepare professional car radio dismantling tools, screwdriver, 3M electronic tape, 3M double side tape, sleeve, cotton cloth.
5. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
Quick Upgrade Instruction for a 2004 2005 2006 2007 2008 AUDI A4 Aftermarket Radio GPS Entertainment System
1. Original car radio dash.
2. Insert in 4PCS dismantled keys.
3. Take the original host.
4. Remove the wire from original power harness.
5. Take out the air outlet.
6. Put the paper well in position.
7. Cut along red line.
8. Effect picture after cutting.
9. Take out control panel.
10. Take out gear decorated cover.
11. Take out cigar lighter.
12. Dismantle the cigar light (metal and plastic).
13. Install well the cigar lighter into Android IDRIVE.
14. Let IDRIVE cable go through original lighter hole.
15. Plug on lighter cable and put the IDRIVE cable into IDRIVE cable.
16. Remove gasket. locked the IDRIVE button well with PW3.5X8 screw.
17. Put well IDRIVE button.
18. Pry loose, take out the decoration strop and screws.
19. Plug well all Android cables and original power harness plug into Android adaptor.
20. Locked back original screws, then the holder can be fixed well.
21. Check all the wiring and power on to test.
22. Press button “CD” twice, switching to “TRACK02”, then Android will have sound.
23. Full test the fucntions and IDRIVE button.
24. Installation is done.
Above are tips on how to install and upgrade a car radio GPS system, i really hope that is helpful. But there are many different cars with very different structures and different functions. For safety consideration, if you have any problems during installation, you can call your dealer for a professional technician to install it, so that you can avoid damage to your car and car radio GPS system. If you want to buy a new unit, here i would like to commend a great 2004 2005 2006 2007 2008 AUDI A4 Aftermarket Radio GPS Entertainment System from Seicane to you, more details, please click:
This excellent 2004 2005 2006 2007 2008 AUDI A4 Aftermarket Radio GPS Entertainment System comes with a large 10.25 inch 5 point touch screen, which is ideal for you to enjoy the smooth operation and visual feast in your beloved car. Besides, rear seat passengers can watch DVD disc video from the Headrest Monitor while the driver using navigation on the front main unit. Go with this excellent car radio and enjoy your driving.
Good luck to you!
Recent Comments