If you want to pursue a more convenient and comfortable in-car life as well as a brand new driving experience, as far as I am concerned, it is the easiest and best way for you to replace your factory radio with a new multifunctional car radio. The following is a detailed 2008 2009 2010 2011 2012-2014 Mercedes Benz GLK X204 GLK350 GLK320 GLK280 GLK250 GLK220 GLK200 car radio installation guide. If you have the same or similar dashboard, you might as well refer to this guide before you start your installation work.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2008 2009 2010 2011 2012-2014 Mercedes Benz GLK X204 GLK350 GLK320 GLK280 GLK250 GLK220 GLK200 car radio installation guide
1. The original car radio.
2. Use a flat removal tool to pry up the air vent.
3. Remove the air vent and disconnect the connector at the back of the air vent.
4. Use the flat removal tool to pry the screen panel.
5. Use a screwdriver to remove screws that are holding teh screen.
6. Pry the car radio panel.
7. Remove the screws that are holding the car radio.
8. Use a removal tool to help you remove the original car radio.
9. Take the original car radio out from the dashboard.
10. Disconnect the connectors and cables at the back of the original car radio.
11. Check all the accessories for the new Seicane car radio.
12. Connect the harnesses to the back of the new Seicane car radio.
13. Connect the Seicane car radio to your original car radio’s plugs.
14. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
15. If the new Seicane car radio works well, put it into the dash.
16. Put everything into their original place, and all the installation is done.
It is normal if you encounter any problems during the installation process. In that case, it is suggested that you should contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly go to a car radio upgrade center to ask a professional to help you install the new car radio.
Besides, it is essential for you to pick an ideal car radio for your beloved car. If you don’t know what kind of car radios can fit your car, I’d like to introduce an amazing 2008 2009 2010 2011 2012-2014 Mercedes Benz GLK X204 GLK350 GLK320 GLK280 GLK250 GLK220 GLK200 car radio from Seicane to you. For more details, please click:
This car radio can enhance it capacity, improve its performance and facilitate its operation since it is upgraded to run on the stable Android 6.0 operation system and a high-quality 8 – Core 1.5 GHz RK-PX5 A53 processor.
Both your car interior environment and driving experience can be greatly improved thanks to these features supported by this unit, mainly including the high-end 3D GPS navigation function, FM/AM radio, DVD player, Bluetooth hands-free call, Bluetooth streaming music, AUX, USB/ SD connection, etc.
Even though you don’t have a good sense of directions, you can depend on the 3D GPS navigation system of high accuracy to locate where you are and find the right way to reach your desired destinations through turn-by-turn directions and voice prompts. Additionally, this unit’s dual zone function enables you to listen to your favorite music while navigating.
Wish you enjoy your driving accompanied by this unit. Good luck to you!
Recent Comments