As a car owner of a 2011 2012 2013 2014 2015 2016 JEEP Wrangler, are you still looking for some way to take your driving experience up a notch? As far as I am concerned, it will be a great choice for you to remove your factory radio and install a new aftermarket car radio under a correct installation guide. This article aims to introduce how to remove the factory radio and install the new car radio for 2011 2012 2013 2014 2015 2016 JEEP Wrangler. You may refer to it carefully.

Here are some tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and www.seicane.com make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, you can shop at Seicane.

 

2011 2012 2013 2014 2015 2016 JEEP Wrangler car radio installation instruction

1. Get the window control out of the original place, so that you can get access to the screw that is behind it.

2. Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control.

3. You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out.

4. There is a clip and you need to push it down and make it come right off, after that, put this window control to the side.

5. Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray.

6. Next you are going to pull away the trim under the steering wheel.

7. With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set.

8. Firmly pull the dash and it should be clipped out.

9. With the dash removed, you now can have access to the four bolts that are holding the original car radio.

10. Remove these four bolts with the seven millimeter screwdriver.

11. With all the bolts removed, the original car radio should simply slide out from the original place.

12. Disconnect the factory connectors and wires at the back of the original car radio.

13. Check all the accessories for the new Seicane car radio.

14. Connect the harnesses to the back of the new Seicane car radio.

15. Connect the Seicane car radio to your original radio’s plugs.

16. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane car radio into the dash.

18. Put everything into their original place. All the installation is done.

 

Above is the whole installation process about 2011 2012 2013 2014 2015 2016 JEEP Wrangler car radio. Before removal and installation, make sure you are clear about every detailed step. If you cannot totally understand these steps, you can seek help from your dealer, someone experienced or a professional. While for the selection of an ideal car radio, if you have no ideas, here I would like to share an amazing 2011 2012 2013 2014 2015 2016 JEEP Wrangler car radio from Seicane with you.

This car radio is running on the stable Android 10.0 operation system, and it has 4G RAM and 64G ROM, so it can provide its users with smoother, faster and easier operation experience.

Under the guidance of the high-end 3D GPS navigation system, this amazing car radio enables you to locate where you are currently and find the right way to reach your desired destinations. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Additionally, the wireless Bluetooth technology for hands-free calls and streaming music is also supported by this unit to promise your driving safety and enjoyment as long as you connect your Bluetooth-enabled mobile phone to this unit.

What’s more, this unit can support the steering wheel control, headlamp output, reverse output and ACC output. And this unit can support hand brake detecting, the door information display and the original car’s amplifier.

Don’t hesitate to add it to your shopping cart if you like this unit! Good luck to you!

Would you like to enjoy more up-to-date features brought by an ideal car radio in your car while you are driving? If yes, why not think about replacing your factory radio with a new multifunctional car radio. If you have a 2015 2016 2017 JEEP Wrangler and plan to install a new aftermarket car radio so as to embrace a brand new driving experience, then you can take the following related installation guide as a reference. Wish you can get some help from the guide.

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2015 2016 2017 JEEP Wrangler car radio installation instruction

1. Get the window control out of the original place, so that you can get access to the screw that is behind it.

2. Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control.

3. You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out.

4. There is a clip and you need to push it down and make it come right off, after that, put this window control to the side.

5. Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray.

6. Next you are going to pull away the trim under the steering wheel.

7. With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set.

8. Firmly pull the dash and it should be clipped out.

9. With the dash removed, you now can have access to the four bolts that are holding the original car radio.

10. Remove these four bolts with the seven millimeter screwdriver.

11. With all the bolts removed, the original car radio should simply slide out from the original place.

12. Disconnect the factory connectors and wires at the back of the original car radio.

13. Check all the accessories for the new Seicane car radio.

14. Connect the harnesses to the back of the new Seicane car radio.

15. Connect the Seicane car radio to your original radio’s plugs.

16. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane car radio into the dash.

18. Put everything into their original place. All the installation is done.

 

Above is the whole removal and installation process for a 2015 2016 2017 JEEP Wrangler. If you have any doubts, please don’t hesitate to seek help from your dealer, someone experienced or a professional. Besides, it is essential for you to pick an ideal car radio for your car. If you have no ideas, here I would like to recommend a remarkable 2015 2016 2017 JEEP Wrangler car radio from Seicane to you. For more details, please click:

https://www.seicane.com/en/android-touchscreen-radio-for-2015-2017-jeep-wrangler-bluetooth-music-gps-navigation-head-unit-support-mirror-link-dab-obdii-usb-tpms-3g-wifi-steering-wheel-control-1080p-video-s04155

This car radio will enable you to have a brand new in-car life since its operation system has been upgraded to the latest and stable Android 6.0 version and it has a powerful quad-core CPU processor.

Under the guidance of the worldwide real-time GPS navigation system, you are allowed to easily locate where you are and have the most suitable route option to arrive at your ideal destinations according to turn-by-turn directions and voice prompts. Besides, thanks to this unit’s dual zone function, you can freely enjoy your favorite music under GPS mode and the music will intelligently switch to GPS voice, which won’t have any negative influence on GPS function.

Besides, this unit comes with a very large 10.1 inch 1024*600 multi-touch screen to provide  you a wide field of viewing.

Wish you like this unit and good luck to you!

As the technology rapidly develops, an ideal car radio should be compatible with a higher performance and various functions. If your factory radio can not support many modern features, then it is wise of you to replace your factory radio with a new aftermarket car radio. The following is a straightforward 2008 2009 2010 2011 2012-2017 JEEP Wrangler car radio installation instruction from Seicane. If you have the same or similar dashboard, you can refer to this instruction carefully.

4 tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2008 2009 2010 2011 2012-2017 JEEP Wrangler car radio installation instruction

1. Get the window control out of the original place, so that you can get access to the screw that is behind it.

2. Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control.

3. You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out.

4. There is a clip and you need to push it down and make it come right off, after that, put this window control to the side.

5. Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray.

6. Next you are going to pull away the trim under the steering wheel.

7. With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set.

8. Firmly pull the dash and it should be clipped out.

9. With the dash removed, you now can have access to the four bolts that are holding the original car radio.

10. Remove these four bolts with the seven millimeter screwdriver.

11. With all the bolts removed, the original car radio should simply slide out from the original place.

12. Disconnect the factory connectors and wires at the back of the original car radio.

13. Check all the accessories for the new Seicane car radio.

14. Connect the harnesses to the back of the new Seicane car radio.

15. Connect the Seicane car radio to your original radio’s plugs.

16. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane car radio into the dash.

18. Put everything into their original place. All the installation is done.

 

Wish the above installation guide can be helpful for you. If you have any doubts, please don’t hesitate to consult your dealer, someone experienced or turn to a professional for help. Anyway, before installation, please select an ideal car radio for your beloved car. If you don’t have any ideas, you might as well check out the following link which is an amazing 2008 2009 2010 2011 2012-2017 JEEP Wrangler car radio from Seicane.

https://www.seicane.com/android-hd-touchscreen-radio-head-unit-for-2008-2009-2010-2011-2017-jeep-wrangler-with-gps-navigation-system-bluetooth-music-wifi-usb-mirror-link-1080p-video-s18jp25

This intelligent car radio for a 2008 2009 2010 2011 2012-2017 JEEP Wrangler can be regarded as one of the best replacements for your outdated factory radio. It is running on the most advanced and stable Android 7.1.2 operation system and a high-quality quad-core CPU processor to enhance your car’s capabilities and performance.

When you turn on the GPS navigation system, you are able to know your current locations and get the optimal route option to reach your desired destinations through turn-by-turn directions and voice prompts. And with dual zone function, this unit enables you to listen to your favorite music while navigating, which won’t have any negative influence on GPS navigation function.

Wish you enjoy your trip accompanied by this unit. Good luck to you!