As the owner of Jeep Wrangler, it’s never too late to install the stereo and speaker system by yourself if you wish to improve your sound quality in your car in a low-cost way. But the fact is that the process of installing this stuff usually fraught with many problems. If you want to avoid this problem once and for all, it’s necessary for you to read the following easy to install guide of Jeep Wrangler aftermarket stereo and speaker system, which can help you to reduce some redundant risk.

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

2011-2017 JEEP Wrangler car radio installation guide

Step 1. Remove top tray and bolt underneath.

Step 2. remove another bolt behind the switches

Step 3. Pry off the panel below the steering wheel column to access the two more bolts on either side.

Step 4. Remove the four bolts around the head unit.

Step 5. Pry off the side panels.

Step 6. Remove glove box and lower panel (passenger’s side).

Step 7. Front speaker removal (passenger’s side).

Step 8. Unbolt the lower dash panel then pull out speaker from below (driver’s side).

Step 9. Replacing the tweeters.

Step 10. Sound bar speaker removed and polyfill fiber inserted.

Step 11. Power wire and fuse connected to the battery.

Step 12. Bolting down the ground wire.

Step 13. Amplifier and subwoofer installed to the trunk.

To be honest, you should have a clearer idea about how to replace your stereo according the 13 steps above if you read them thoroughly and carefully. But if you still have some doubt or want to look for outer assistance, you can ask for your car dealer for help or go to the neighbor stores to buy their services. But I still want to remind you that it’s best for you to go to the internet under the pandemic prevailing conditions so that you can reduce the chance of contracting.After all, it’s up to you to decide which way to choose.

As far as I am concerned, I prefer to search some information from the website such as Seicane, where radios replacement and other relevant car accessories are on sale all the time and won the good reputation abroad. If you want to know more details about how to install your receiver or other relevant product like subwoofer and amplifier, you can visit the our page of Jeep wrangler stereo with bluetooth Carplay, which will bring you the most helpful offers online as well as the most relevant content.