As the technology greatly improves, nowadays a car radio is usually compatible with more and more modern features. If you think your factory radio is out of date, it is suggested that you replace it with a new aftermarket car radio. This article is mainly about how to remove the factory radio and install the new car radio for 2012 2013 Toyota CAMRY. If you happen to own the same or similar dashboard, you can refer to it to deal with the installation.
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts (Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2012 2013 Toyota CAMRY car radio installation instruction
1. Remove the lower dashboard trim panels and the upper air conditioning vents.
2. Gently pry the upper dashboard housing from the radio’s trim bazel using either an automotive trim tool or your hands.
3. After the upper dashboard housing has been disconnected, remove the two upper &two lower radio mounting screws from the dashboard.
4. Once the four radio mounting screws have been removed, gently lift the radio from the dashboard in order to gain access to the factory wiring harnesses on the backside.
5. Disconnect the connectors at the back of the radio.
6. Check all the accessories for the new Seicane car radio.
7. Connect the harnesses to the back of the new Seicane car radio.
8. Connect the Seicane car radio to your original radio’s plugs.
9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car radio into the dash.
11. Put everything into their original place. All the installation is done.
Before installation, please confirm that you understand every detailed step. If you have any doubts, please don’t hesitate to seek help from your dealer, someone experienced or a professional. Or you can directly arrange a professional to help you install the new car radio. Anyway, first of all, it is essential for you to select an ideal car radio, here I would like to recommend an amazing 2012 2013 Toyota CAMRY car radio from Seicane to you.
This car radio comes with a super large 10.2 inch HD 1024 x 600 multi-touch screen. Based on the most advanced Android 7.1 operation system and a high-quality quad-core 1.6GHz RK PX3 processor, this car radio can greatly facilitate the operation so as to provide its users with a brand new and wonderful operation experience.
Under the guidance of the turn-by-turn directions and voice prompts offered by the worldwide real-time GPS navigation system of high accuracy, you can easily know your current locations and have the optimal route option to reach your desired destinations. And you can also listen to radio, USB or SD card music playback while navigating thanks to this unit’s dual zone function.
Wish you like this unit and good luck to you!
Recent Comments