The Easy-to-understand Steps on Installing a 2008 2009 2010 2011-2013 VW Volkswagen GPS Bluetooth Car Radio with Steering Wheel Control WiFi

2008 2009 2010 2011-2013 VW Volkswagen GPS Bluetooth Car Radio after installation

It goes without saying that an all-in-one car stereo can be regarded as the most significant part of a car since it comes with a wide range of practical and entertainment features, mainly including 3D GPS function, Bluetooth function, DVD player, FM/AM radio tuner, etc. If you are plan to replace your factory radio with a multifunctional car radio, you can go to a car radio upgrade center or ask a professional to install it in your car. Anyway, you can find an installation instruction to help you have a general understanding of the installation. The following is a 2008 2009 2010 2011-2013 VW Volkswagen car radio installation instruction from Seicane I would like to share with you.

2008 2009 2010 2011-2013 VW Volkswagen GPS Bluetooth Car Radio after installation
2008 2009 2010 2011-2013 VW Volkswagen GPS Bluetooth Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2008 2009 2010 2011-2013 VW Volkswagen car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. On the top of the air vent, you will see a top cover. Get underneath it and slide it out.

On the top of the air vent, you will see a top cover. Get underneath it and slide it out
On the top of the air vent, you will see a top cover. Get underneath it and slide it out
2-1
2-1

3. After you slide out the top cover, you will see two screws.

After you slide out the top cover, you will see two screws
After you slide out the top cover, you will see two screws

4. Unscrew these two screws with a screwdriver and remove the top piece.

Unscrew these two screws with a screwdriver and remove the top piece
Unscrew these two screws with a screwdriver and remove the top piece

5. Gently pull out the air vent and disconnect the connectors carefully. Please use a trim removal tool if necessary.

Gently pull out the air vent and disconnect the connectors carefully. Please use a trim removal tool if necessary
Gently pull out the air vent and disconnect the connectors carefully. Please use a trim removal tool if necessary
5-1
5-1

6. Use a screwdriver to remove the two screws on the top corner of the original car radio.

Use a screwdriver to remove the two screws on the top corner of the original car radio
Use a screwdriver to remove the two screws on the top corner of the original car radio

7. Pry the car radio frame by a flat removal tool and then remove the frame.

Pry the car radio frame by a flat removal tool and then remove the frame
Pry the car radio frame by a flat removal tool and then remove the frame
7-1
7-1
7-2
7-2

8. Unscrew the four screws that holds the original car radio.

Unscrew the four screws that holds the original car radio
Unscrew the four screws that holds the original car radio

9. Gently take out the original car radio out from the dashboard.

Gently take out the original car radio out from the dashboard
Gently take out the original car radio out from the dashboard

10. Disconnect all the connectors and cables at the back of the original car radio.

Disconnect all the connectors and cables at the back of the original car radio
Disconnect all the connectors and cables at the back of the original car radio

11. The original car radio is removed successfully.

The original car radio is removed successfully
The original car radio is removed successfully

12. Plug the power connector the original car’s socket. Make sure the lever thing is up first and then push it down.

Plug the power connector the original car’s socket. Make sure the lever thing is up first and then push it down
Plug the power connector the original car’s socket. Make sure the lever thing is up first and then push it down
12-1
12-1

13. Make sure that the rest of connectors and cables are connected successfully.

Make sure that the rest of connectors and cables are connected successfully
Make sure that the rest of connectors and cables are connected successfully
13-1
13-1

14. For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram.

For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram
For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram

15. Carefully place the new car radio.

Carefully place the new car radio
Carefully place the new car radio

16. Tighten the screws that hold the car radio with a screwdriver.

Tighten the screws that hold the car radio with a screwdriver
Tighten the screws that hold the car radio with a screwdriver

17. Put everything into their original place. All the installation is done.

Put everything into their original place. All the installation is done
Put everything into their original place. All the installation is done

18. The new Seicane car radio after installation.

The new Seicane car radio after installation
The new Seicane car radio after installation

 

Above is the whole removal and installation process of a 2008 2009 2010 2011-2013 VW Volkswagen car radio. If you meet any difficulties and don’t know how to overcomes them, you can browse some professional websites for seek advice, contact your dealer or seek help from a professional. Or you can directly go to a car radio upgrade center and ask a professional technician to help you install the new car radio.

Besides, it is very necessary for you to select an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is an excellent 2008 2009 2010 2011-2013 VW Volkswagen car radio from Seicane. For more details, please click:

https://www.seicane.com/android-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-skoda-seat-with-3g-wifi-mirror-link-obd2-bluetooth


This powerful car radio, which is loaded with the pure stable Android 8.0  operation system, 8 – Core 1.5 GHz RK-PX5 A53 processor and 32GB Inland flash as well as 4GB RAM, can be one of your best choices to replace your factory radio in your beloved car.

Under the guidance of the turn-by-turn directions and voice prompts offered by the advanced  3D GPS navigation system of high accuracy, this unit enables you to easily locate where you are currently and help you gain the most route options to arrive at your desired destinations. Additionally, another amazing feature is that this unit comes with dual zone function, so you can also listen to your favorite music while navigating and the music will automatically switch to GPS voice.

What’s more, without keeping your hands off the steering wheel, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you as long as you make your Bluetooth-enabled mobile phone pair with this smart car radio. And by doing so, you can obtain great convenience and enjoyment.

What are you waiting for? If you like this unit, just add it to your shopping cart right now!